Produkte für die Fußbodentechnik - INNO-FLOOR
Filter
  • FOX HARDTOP® FF300 BASKI BETON
    • FOX HARDTOP® FF300 BASKI BETON

    • FOX HARDTOP® FF300 BASKI BETON

    • Quartz Aggregated Powder Surface Hardener Developed For Press Concrete Application Surfaces Description FOX HARDTOP® FF300 PRESS CONCRETE is a one-component, coloured, ready-to-use surface hardener consisting of cement, specially selected quartz aggregates, pigments and additives, sprinkled in fresh powder on concrete and screed surfaces.
  • FOX DECOUPLING MEMBRANE FF480
    • FOX DECOUPLING MEMBRANE FF480

    • FOX DECOUPLING MEMBRANE FF480

    • Load Seperation Membrane Definition FOX DECOUPLING MEMBRANE FF480, load separation membrane consisting of two different polypropylene felts and a glass fiber woven in the middle, which prevents ground stabilization and cracks that may occur on the ground from affecting the top coating by forming a bridge.
  • FOX DECOUPLING MEMBRANE FF485 WP
    • FOX DECOUPLING MEMBRANE FF485 WP

    • FOX DECOUPLING MEMBRANE FF485 WP

    • Waterproofing Load Separation Membrane Definition FOX DECOUPLING MEMBRANE FF485 WP, load separation membrane consisting of two different polypropylene felts and a special textured polyethylene foil, which also acts as a waterproofing on the applied surface. Non-woven polypropylene felts act as an adhesive bridge on the one hand, while the dark gray felt material also acts as a layer to tolerate…
  • FOX DOMINO® FILLER FD775
  • FOX HARDTOP® FF300 RELEASE AGENT
  • FOX ALPHA-CILA FF860FOX ALPHA-CILA FF860
    • FOX ALPHA-CILA FF860FOX ALPHA-CILA FF860

    • FOX ALPHA-CILA FF860

    • Press Concrete Protective Gloss Polish Material Description FOX ALPHA-CILA FF860 is acrylic based, solvent based, transparent, protective coating material for concrete surfaces. It is a topcoat coating that provides a long-lasting protection, dust-free, surface resistance and aesthetic appearance, penetrating into the surface of any surface with natural appearance, coloured acid (stain), precast protection or surface hardener treatment.
  • FOX ACRILCOAT FF800
    • FOX ACRILCOAT FF800

    • FOX ACRILCOAT FF800

    • Transparent Impregnation Material with Anti-Dusting Water Repellent Properties for Concrete Floors, Press Brick Coating and Ceramic Joints Description FOX ACRILCOAT FF800 is an acrylic resin-based impregnation material used for preventing dusting of all kinds of concrete floors, ensuring bright appearance, protecting pressed brick coatings, reducing the dirt of ceramic joints, gaining water-repellent properties.
  • FOX ALPHACOAT FF900FOX ALPHACOAT FF900
    • FOX ALPHACOAT FF900FOX ALPHACOAT FF900

    • FOX ALPHACOAT FF900

    • Protective and Reinforcing Special Coating Material for Concrete and Natural Stone Surfaces Description FOX ALPHACOAT FF900 is an acrylic resin based material formulated with special additives used in the protection and polishing of all kinds of concrete, artificial and natural stone surfaces. It is a top coat coating that provides a long-lasting protection, dust-free, surface resistance and aesthetic appearance, penetrating…
  • FOX AC TOPCOAT FF920FOX AC TOPCOAT FF920
    • FOX AC TOPCOAT FF920FOX AC TOPCOAT FF920

    • FOX AC TOPCOAT FF920

    • Protective and Reinforcing Special Coating Material for Concrete and Natural Stone Surfaces Description FOX AC TOPCOAT FF920 is an acrylate-polyester-polyurethane copolymer based, one-component, high abrasion and scratch resistance, resistant to tire tracks, water-based, UV resistant, aliphatic topcoat.
  • FOX DOMINO® AC SEALER FD792
  • FOX EPOTHANE® BASECOAT CRYSTALFOX EPOTHANE® BASECOAT CRYSTAL
  • FOX EPOTHANE® TOPCOATFOX EPOTHANE® TOPCOAT
  • Platzhalter Bild
  • FOX EPOTHANE® TOPCOAT WBFOX EPOTHANE® TOPCOAT WB
    • FOX EPOTHANE® TOPCOAT WBFOX EPOTHANE® TOPCOAT WB

    • FOX EPOTHANE® TOPCOAT WB

    • Epoxy Based, Two Component, Water Based, Topcoat Description FOX EPOTHANE® TOPCOAT WB is epoxy based two components, water based, high mechanical abrasion resistance, and hygienic, solvent free, coloured topcoat material. In compliance with TS EN 1504-2 / Principle 1.3, 2.2, 8.2 conditions

Inhalts-Ende

Es existieren keine weiteren Seiten

← Neuere Beiträge