Abdichtungsprodukte - INNO-SEAL
Filter
  • FOX AQUAROOF SR
    • FOX AQUAROOF SR

    • FOX AQUAROOF SR

    • WATERPROOFING & SOLAR REFLECTION & DIRT RESISTANT High Solar Reflectance, Pollution Resistant,UV Resistant, Super Flexible Waterproofing Description FOX AQUAROOF SR, elastomeric resin-based, fiber-reinforced, ready-to-use super flexible waterproofing material that provides energy savings by reducing the roof surface temperature, thanks to its high sunlight reflectivity, and has increased pollution resistance.          
  • FOX CRYSTALISER FS265
    • FOX CRYSTALISER FS265

    • FOX CRYSTALISER FS265

    • Kristallisiertes, aktives hydrophobes Abdichtungsmaterial auf Zementbasis Definition FOX CRYSTALISER FS265, einkomponentiges, gebrauchsfertiges Abdichtungsmaterial auf Zementbasis mit hydrophober Reaktion, aufgetragen gegen aktiven, negativen und positiven Wasserdruck Entspricht den Anforderungen der EN 1504-2:2004 / Prinzipien 2.2 und 8.2.
  • FOX EPOCOTE® FS190FOX EPOCOTE® FS190
    • FOX EPOCOTE® FS190FOX EPOCOTE® FS190

    • FOX EPOCOTE® FS190

    • Epoxy Based, Two Component, Colored Topcoat to Protect Concrete and Steel Description FOX EPOCOTE® FS190 is an epoxy based, two component, waterproof coating material developed to protect concrete and steel. In compliance with TS EN 1504-2 / ​​Principle 1.3, 2.2, 5.1 and 8.2.
  • FOX MULTIPLUS® 2K FS542
    • FOX MULTIPLUS® 2K FS542

    • FOX MULTIPLUS® 2K FS542

    • Zement - und polymermodifiziertes, zweikomponentiges, flexibles Abdichtungsmaterial auf Bitumen-Kautschuk-Basis Beschreibung FOX MULTIPLUS® 2K FS542 ist ein zement- und polymermodifiziertes, zweikomponentiges, lösungsmittelfreies, rissüberbrückendes, flexibles Abdichtungsmaterial auf Bitumen-Kautschuk-Basis. Es erfüllt die Anforderungen der EN 15814:2011+A2:2014 CB1-W1-C2A-R1. CB1:  ≥1mm Statische Rissüberbrückung W1 :  0,0075 N/mm² Druckwasserdichtigkeit C2A:  0,30 MN/m² Druckfestigkeit R1  :  ≤ Regenbeständigkeit nach 24 Stunden Öffentliche Arbeiten Poz-Nr. 04.379/I07
  • FOX MULTIPLUS® 2K FS542 PLUS FIBER
    • FOX MULTIPLUS® 2K FS542 PLUS FIBER

    • FOX MULTIPLUS® 2K FS542 PLUS FIBER

    • Cement and Polymer Modified, Bitumen-Rubber Based, Two Component, Fiber Reinforced, Crack Bridging, Elastic Waterproofing Material Description FOX MULTIPLUS® 2K FS542 PLUS FIBER is cement and polymer modified, bitumen-rubber based, two component, fiber reinforced, solvent-free, elastic waterproofing material with crack bridging feature. In compliance with EN 15814+A2:2015 CB2-W2A-C2A-R2 standards. CB2  :  ≥2mm Static Crack Bridging W2A :  0,075 N/mm² Pressure Water…
  • FOX MULTIPLUS® DUALGUM 1K
    • FOX MULTIPLUS® DUALGUM 1K

    • FOX MULTIPLUS® DUALGUM 1K

    • Colloidal Dispersion Polymer Modified, Bitumen-Rubber Based, One Component, Waterproofing Material Description FOX MULTIPLUS® DUALGUM 1K is a colloidal dispersion is a polymer-modified, one-component, bitumen-rubber based, water-based liquid membrane. It is a very fast drying waterproofing material with ultrahigh application efficiency. It is a bitumen emulsion that has high elasticity and adheres perfectly to concrete and metal surfaces. In compliance with…
  • FOX MULTIPLUS® DUALGUM 1K SPRAY
    • FOX MULTIPLUS® DUALGUM 1K SPRAY

    • FOX MULTIPLUS® DUALGUM 1K SPRAY

    • Colloidal Dispersion Polymer Modified, Bitumen Rubber Based, One Component, Waterproofing Material Description FOX MULTIPLUS® DUALGUM 1K SPRAY is a colloidal dispersion polymer modified, bitumen-rubber based, one-component, water-based liquid membrane. It is a waterproofing material with high application efficiency and can be applied with a spray machine. It is a bitumen emulsion that has high elasticity and adheres perfectly to concrete…
  • FOX MULTIPLUS® DUALGUM 1K UV
    • FOX MULTIPLUS® DUALGUM 1K UV

    • FOX MULTIPLUS® DUALGUM 1K UV

    • One Component, Colloidal Dispersion Polymer Based UV Resistant Topcoat Coating Material Description FOX MULTIPLUS® DUALGUM 1K UV, is a colloidal dispersion polymer based, one component, water based, top coat coating material that provides the protected from UV and climate conditions of FOX DUALGUM® series waterproofing materials.
  • FOX MULTIPLUS® DUALGUM PRIMER 1K DG
  • FOX MULTIPLUS® DUALGUM PRIMER SL
  • FOX MULTIPLUS® DUALGUM REACTIVEFOX MULTIPLUS® DUALGUM REACTIVE
    • FOX MULTIPLUS® DUALGUM REACTIVEFOX MULTIPLUS® DUALGUM REACTIVE

    • FOX MULTIPLUS® DUALGUM REACTIVE

    • Resistant to Heavy Conditions, Two Component, Colloidal Dispersion Polymer Modified, Bitumen-Rubber Waterproofing Material  Description FOX MULTIPLUS® DUALGUM REACTIVE, resistant to heavy conditions, two components, colloidal dispersion polymer modified, bitumen-rubber based, water based liquid membrane. Fast curing waterproofing material with ultra-high application efficiency. It is a bitumen emulsion with high elasticity feature and adheres to concrete and metal surfaces perfectly. Creates…
  • Platzhalter Bild
    • Platzhalter Bild

    • FOX MULTIPLUS® FS540

    • Bitumen-Rubber Based, Single Component, Flexible Waterproofing Material Description FOX MULTIPLUS® FS540, bitumen-rubber based, one-component, solvent-free, ready-to-use, flexible waterproofing material with crack bridging feature. It meets the requirements of EN 15814:2011+A2:2014 - CB1-W1-C1. CB1 : ≥ 1mm Static Crack Bridging W1  : 0,0075 N/mm2 Pressured Water Permeability C1    : 0,06 MN/m² Compressive Strength
  • FOX MULTIPLUS® FS540 PLUS
    • FOX MULTIPLUS® FS540 PLUS

    • FOX MULTIPLUS® FS540 PLUS

    • Bitumen-Rubber Based, One Component, Crack Bridging, Elastic Waterproofing Material Description FOX MULTIPLUS® FS540 PLUS is bitumen-rubber based, one-component, solvent-free, ready-to-use, elastic waterproofing material with crack bridging feature. In compliance with TS EN 15814+A2:2015 / CB2-W2A-C2A standards. CB2 : ≥2 mm Static Crack Bridging W2A: 0,075 N/mm2 Pressure Water Impermeability C2A : 0,30 MN/m² Compressive Strength Public Works Pos. No: 04.379/I06
  • Platzhalter Bild
  • FOX MULTISEAL® 1K FS365
    • FOX MULTISEAL® 1K FS365

    • FOX MULTISEAL® 1K FS365

    • Cement Based, Polymer Reinforced, One Component Waterproofing Material Description FOX MULTISEAL® 1K FS365 is cement based, polymer reinforced, one component, waterproofing material designed to be applied to all kinds of reinforced concrete surfaces and cement based plaster floors. Ministry of Public Works and Settlement Item No: 04.477/2
  • FOX MULTISEAL® FS367FOX MULTISEAL® FS367
    • FOX MULTISEAL® FS367FOX MULTISEAL® FS367

    • FOX MULTISEAL® FS367

    • Cement and Polymer Dispersion Based, Two Component, Semi-Elastic Waterproofing Material Description FOX MULTISEAL® FS367, cement and polymer dispersion based, two component, semi-elastic waterproofing material designed for all kinds of reinforced concrete surfaces and cement-based plasters. It meets the requirements of EN 1504-2 / Principles 2.2 and 8.2.         
  • FOX MULTISEAL® FS477FOX MULTISEAL® FS477
    • FOX MULTISEAL® FS477FOX MULTISEAL® FS477

    • FOX MULTISEAL® FS477

    • Hochflexible Dichtschlämme Beschreibung FOX MULTISEAL® FS477 ist eine zement- und polymerdispersionsbasiert, zweikomponentig, rissüberbrückend bei sehr niedrigen Temperaturen (-20°C), chlorwasserbeständig, hochflexible Abdichtung für alle Arten von Stahlbetonflächen und zementgebundenen Putzen. EN 14891:2017 entspricht der Norm für wasserdichte Produkte in flüssiger Form zur Verwendung unter keramischen Fliesen in Nassbereichen. Bietet CMO2P Bedingungen. Poz No: 15.270.1007 CM   : Zementbasiertes polymerverstärktes Abdichtungsmaterial O2    :…
  • FOX MULTISEAL® FS478FOX MULTISEAL® FS478
    • FOX MULTISEAL® FS478FOX MULTISEAL® FS478

    • FOX MULTISEAL® FS478

    • Hochflexible Dichtschlämme Beschreibung FOX MULTISEAL® FS478 ist eine zement- und polymerdispersionsbasierte, zweikomponentige, rissüberbrückende (-5°C), chlorwasserbeständige, vollständig flexible Abdichtung für alle Arten von Stahlbetonoberflächen und zementgebundenen Putzen. EN 14891:2017 entspricht der Norm für wasserdichte Produkte in flüssiger Form zur Verwendung unter keramischen Fliesen in Nassbereichen. Bietet CMO1P Bedingungen. Position Nr.:15.270.1008 CM   : Zementbasiertes polymerverstärktes Abdichtungsmaterial O1    : Rissüberbrückende Eigenschaften bei sehr…
  • FOX MULTISEAL® FS488
    • FOX MULTISEAL® FS488

    • FOX MULTISEAL® FS488

    • Hoge Flexible Dichtungsschlämme für die Anwendung auf positiver und negativer Seite Beschreibung FOX MULTISEAL® FS488 ist ein zement- und polymerdispersionbasiertes, zweikomponentiges, bei niedrigen Temperaturen (-5°C) rissüberbrückendes, gegen chlorhaltiges Wasser beständiges, vollflexibles Abdichtungsmaterial. Es wurde für alle Arten von Stahlbetonoberflächen und zementbasierten Putzen entwickelt und kann sowohl auf negativer als auch positiver Seite angewendet werden. Die EN 14891:2017 Norm für flüssig…
  • FOX MULTISEAL® STANDARTFOX MULTISEAL® STANDART
    • FOX MULTISEAL® STANDARTFOX MULTISEAL® STANDART

    • FOX MULTISEAL® STANDART

    • Auf Zement- und Polymerdispersion basierende, zweikomponentige, positiv und negativ aufzubringende Abdichtungsmasse mit Kapillarwirkung Definition FOX MULTISEAL® STANDART ist ein zweikomponentiges Abdichtungsmaterial auf Zement- und Polymerdispersionsbasis, das positiv oder negativ aufgetragen werden kann, um Feuchtigkeit, Leckagen und Oberflächenwasser auf Betonoberflächen zu verhindern. Entspricht der Norm EN 1504-2/Prinzipien 2.2 und 8.2
  • FOX MULTISEAL®-UV FS475FOX MULTISEAL®-UV FS475
    • FOX MULTISEAL®-UV FS475FOX MULTISEAL®-UV FS475

    • FOX MULTISEAL®-UV FS475

    • Cement and Acrylic Based, Resistant to UV Rays, Two Component, White, Elastic Waterproofing Material Description FOX MULTISEAL®-UV FS 475 is a cement and acrylic based, two-component, flexible waterproofing material that is resistant to UV rays, which creates an effective barrier against water-borne salts and atmospheric gases. In compliance with TS EN 1504-2 / Principle 2.2 and 8.2 standards.
  • FOX PURMAX SPRAYTEC® FS570FOX PURMAX SPRAYTEC® FS570
    • FOX PURMAX SPRAYTEC® FS570FOX PURMAX SPRAYTEC® FS570

    • FOX PURMAX SPRAYTEC® FS570

    • Polyurethane Based, Two Component, Solvent Free, Fast Curing, Waterproofing Membrane Applied with Special Spray Machines Description FOX PURMAX® SPRAYTEC FS570 is a polyurethane-based, two-component, solvent-free, crack-bridging waterproofing membrane that does not lose its flexibility over time, cures quickly and does not form joints. Thanks to its application speed and fast curing feature, it minimizes the dwell time of the enterprises…
  • FOX PURMAX® 1K FS401
    • FOX PURMAX® 1K FS401

    • FOX PURMAX® 1K FS401

    • Polyurethane Based, One Component, Waterproofing CoatingDescriptionFOX PURMAX® 1K FS401 is a polyurethane based, one component, economical, elastic, low-viscosity, liquid insulation material developed for waterproofing and protection.
  • FOX PURMAX® 1K FS601
    • FOX PURMAX® 1K FS601

    • FOX PURMAX® 1K FS601

    • Polyurethane Based, One Component, Uv Resistant, Waterproofing Material Description FOX PURMAX® 1K FS 601 is a polyurethane based, one component, UV resistant, low viscosity liquid insulation material developed for waterproofing and protection with high permanent elasticity.
  • FOX PURMAX® 2KFOX PURMAX® 2K
    • FOX PURMAX® 2KFOX PURMAX® 2K

    • FOX PURMAX® 2K

    • Polyurethane Based, Two Component, Waterproofing Coating Description FOX PURMAX® 2K is a polyurethane based, two-component liquid insulation material developed for waterproofing and protection. FOX PURMAX® 2K has excellent resistance strength for chemical, mechanical and thermal conditions thanks to its pure elastomeric hydrophobic polyurethane resin and special inorganic filler content.
  • FOX PURMAX® AQUA FS770FOX PURMAX® AQUA FS770
    • FOX PURMAX® AQUA FS770FOX PURMAX® AQUA FS770

    • FOX PURMAX® AQUA FS770

    • Polyurethane Based, Two Component, Solvent Free, Waterproofing Coating Description FOX PURMAX® AQUA FS770 is a polyurethane based, two component, solvent free, thixotropic waterproofing material. It is used safely in insulation of water tanks. It is registered for drinking water tanks.
  • FOX PURMAX® BETOP FS774
    • FOX PURMAX® BETOP FS774

    • FOX PURMAX® BETOP FS774

    • Chlorine-Rubber Based, Solvented, UV Resistant, Aliphatic, Pool Chemicals Resistant Finish Coating Material Description FOX PURMAX® BETOP FS774 is a top coat coating material, chlorine-rubber based, solvent based, UV resistant, and aliphatic, one component, ready to use, resistant to pool chemicals, acid, chlorine, oxidizer and bleaching chemicals.
  • FOX PURMAX® BT2K FS702FOX PURMAX® BT2K FS702
    • FOX PURMAX® BT2K FS702FOX PURMAX® BT2K FS702

    • FOX PURMAX® BT2K FS702

    • Bitumen-Polyurethane Based, Two Component, Elastic, Waterproofing Material Description FOX PURMAX® BT2K FS702, It is a two-component, elastic, bitumen-polyurethane based waterproofing material with high mechanical strength, does not affected by the relative humidity in the environment. It meets the requirements of EN 1504-2:2006 / Principle 1.3, 2.2, 8.2.
  • FOX PURMAX® EP 2KFOX PURMAX® EP 2K
    • FOX PURMAX® EP 2KFOX PURMAX® EP 2K

    • FOX PURMAX® EP 2K

    • Epoxy Based, Two Component, Waterproofing Coating Description FOX PURMAX® EP 2K is epoxy polyurethane based, two component, low viscosity, liquid insulation material developed for waterproofing and protection. FOX PURMAX® EP 2K has excellent resistance strength for chemical, especially cold conditions, thanks to its content of pure elastomeric hydrophobic epoxy polyurethane resin and special inorganic filler.
  • FOX PURMAX® POLYUREA TOPCOATFOX PURMAX® POLYUREA TOPCOAT
    • FOX PURMAX® POLYUREA TOPCOATFOX PURMAX® POLYUREA TOPCOAT

    • FOX PURMAX® POLYUREA TOPCOAT

    • Polyaspartic Based, Two Component, Fast Curing, Aliphatic, Topcoat Coating Description FOX PURMAX® POLYUREA TOPCOAT is a polyaspartic based, two-component, aliphatic, high chemical resistance, low viscosity, flexible, solvent-free, glossy, top coat coating. With its fast drying time, it is an ideal solution for applications with limited reuse time.
  • FOX PURMAX® PRIMER 1K
  • FOX PURMAX® PRIMER 1K RAPID
  • FOX PURMAX® SPRAYTEC FS560FOX PURMAX® SPRAYTEC FS560
    • FOX PURMAX® SPRAYTEC FS560FOX PURMAX® SPRAYTEC FS560

    • FOX PURMAX® SPRAYTEC FS560

    • Pure Polyurea Based, Two Component, Elastic, Fast Curing, Waterproofing Membrane Applied with Special Spray Machines Description FOX PURMAX® SPRAYTEC FS560 is a 100% Pure Polyurea based, two-component, solvent-free, crack-bridging feature waterproofing membrane that does not lose its flexibility over time, does not form a joint, fast curing, can be applied in almost any climatic conditions thanks to its unique chemical…
  • FOX PURMAX® SPRAYTEC FS561FOX PURMAX® SPRAYTEC FS561
    • FOX PURMAX® SPRAYTEC FS561FOX PURMAX® SPRAYTEC FS561

    • FOX PURMAX® SPRAYTEC FS561

    • Hybride,zweikomponentige,elastische,schnellaushärtende, wasserabweisende Membran auf Polyharnstoffbasis, die mit speziellen Sprühmaschinen aufgetragen wird Definition FOX PURMAX® SPRAYTEC FS561, Es handelt sich um eine zweikomponentige, lösungsmittelfreie, rissüberbrückende Abdichtungsbahn auf Hybrid-Polyurea-Basis, die mit der Zeit ihre Flexibilität nicht verliert, schnell aushärtet und dank ihrer einzigartigen chemischen Struktur unter fast allen klimatischen Bedingungen angewendet werden kann keine Verbindungsstelle bilden. Dank seiner Anwendungsgeschwindigkeit und schnellen Aushärtung…
  • FOX PURMAX® SPRAYTEC FS562FOX PURMAX® SPRAYTEC FS562
    • FOX PURMAX® SPRAYTEC FS562FOX PURMAX® SPRAYTEC FS562

    • FOX PURMAX® SPRAYTEC FS562

    • Polyurethane Based, Two Component, Solvent Free, Waterproofing Membrane Applied With Special Spray Machines Description FOX PURMAX® SPRAYTEC FS 562 is polyurethane based, two component, solvent-free, elastic, crack-bridging, fast-curing, non-splice waterproofing membrane that does not lose its flexibility over time. Due to the application speed and fast curing feature, it minimizes the downtime of the facilities compared to the traditional waterproofing…
  • FOX PURMAX® TOPCOATFOX PURMAX® TOPCOAT
    • FOX PURMAX® TOPCOATFOX PURMAX® TOPCOAT

    • FOX PURMAX® TOPCOAT

    • Polyurethane Based, Two Component, Aliphatic, Colored Topcoat Description FOX PURMAX® TOPCOAT, polyurethane based, two component, aliphatic, colored topcoat that protects FOX PURMAX® series waterproofing against U.V and climatic conditions.
  • FOX PURMAX® ULTRAFOX PURMAX® ULTRA
    • FOX PURMAX® ULTRAFOX PURMAX® ULTRA

    • FOX PURMAX® ULTRA

    • Polyurea Based, Two Component, Aliphatic, Waterproofing Coating Description FOX PURMAX® ULTRA is a polyurea based, two component, aliphatic, can be applied with hand in one layer, liquid applied, cold applied, low viscosity liquid insulation material developed for waterproofing and protection. FOX PURMAX® ULTRA has excellent resistance to UV rays, chemical, mechanical and thermal conditions thanks to its pure elastomeric hydrophobic…
  • FOX PURMAX® WB 1K
    • FOX PURMAX® WB 1K

    • FOX PURMAX® WB 1K

    • Polyurethane Modified Acrylic Resin and Water Based, UV Resistant, Aliphatic, Elastic Waterproofing Material Description FOX PURMAX® WB 1K polyurethane modified acrylic resin and water based, UV resistant, aliphatic, one component, ready-to-use, applied on roof,  terrace and prefabricate concrete gutters, elastic waterproofing material
  • FOX SULPHATSEAL FS275
    • FOX SULPHATSEAL FS275

    • FOX SULPHATSEAL FS275

    • FOX SULPHATSEAL FS275, Çimento esaslı, tek komponentli, polimer takviyeli, sülfata dayanıklı, evsel atık su içerisinde bulunan kimyasallara ve mekanik etkilere karşı dayanıklı, beton ve çimento esaslı sıvalar üzerine içten ya da dıştan uygulanan, su yalıtımı malzemesidir.
  • FOX ULTRASEAL® RAPIDFOX ULTRASEAL® RAPID
    • FOX ULTRASEAL® RAPIDFOX ULTRASEAL® RAPID

    • FOX ULTRASEAL® RAPID

    • Cement and Polymer Dispersion Based, Two Component, Fast Curing, Fully Elastic Waterproofing Material Description FOX ULTRASEAL® RAPID is cement and polymer dispersion based, fast curing, two component, fully elastic waterproofing material designed to be applied to all kinds of reinforced concrete surfaces and cement based plaster surfaces.
  • FOX ULTRASEAL®-UV FS485FOX ULTRASEAL®-UV FS485
    • FOX ULTRASEAL®-UV FS485FOX ULTRASEAL®-UV FS485

    • FOX ULTRASEAL®-UV FS485

    • UV-beständiges, Hochflexible Dichtungsschlämme Beschreibung FOX ULTRASEAL®-UV FS485 ist eine zement- und acrylbasierte, UV-beständige, hochflexible Abdichtung, die eine wirksame Barriere gegen Salze und Gase in der Atmosphäre bildet. Erfüllt die Anforderungen von EN 1504-2:2004/Principles 2.2 und 8.2.
  • FOX ULTRATEX
    • FOX ULTRATEX

    • FOX ULTRATEX

    • Three Layer Water and Moisture Insulation Membrane Description FOX ULTRATEX is a 3-layer water and moisture insulation membrane with crack bridging feature that can be used under ceramic and natural stone applications, on walls and floors.
  • Platzhalter Bild
    • Platzhalter Bild

    • FOX ULTRATEX PLUS

    • Three Layer Water and Moisture Insulation Membrane Description FOX ULTRATEX is a 3-layer water and moisture insulation membrane with crack bridging feature that can be used under ceramic and natural stone applications, on walls and floors.
  • FOX WATERPROF® FS100FOX WATERPROF® FS100
    • FOX WATERPROF® FS100FOX WATERPROF® FS100

    • FOX WATERPROF® FS100

    • Acrylharzbasis, UV-beständig, gebrauchsfertig, Elastische Wasserisolierung Beschreibung FOX WATERPROF® FS100, ist ein einkomponentiges, UV-beständiges, gebrauchsfertiges, elastisches Abdichtungsmaterial auf Acrylharzbasis, das auf Dächern, Terrassen, Bachläufen und Außenfassaden eingesetzt wird.
  • FOX WATERPROF® FS100 ELYAFLI
    • FOX WATERPROF® FS100 ELYAFLI

    • FOX WATERPROF® FS100 ELYAFLI

    • Acrylic Resin Based, Fiber Reinforcement, UV Resistant, Ready to Use, Elastic Waterproof Description FOX WATERPROF® FS 100 ELYAFLI, is an acrylic resin based, one component, UV resistant fiber reinforcement, ready to use, elastic waterproofing material that is apply on roof, terrace and roof gutter.
  • FOX WATERPROF® FS105FOX WATERPROF® FS105
    • FOX WATERPROF® FS105FOX WATERPROF® FS105

    • FOX WATERPROF® FS105

    • Elastische Wasserisolierung bereit für Unterkeramik in Badezimmern und Duschen Beschreibung FOX WATERPROF® FS105 ist ein einkomponentiges, gebrauchsfertiges, elastisches Abdichtungsmaterial auf Elastomerharzbasis, das in Nassbereichen unter Keramiken eingesetzt wird. EN 14891:2017 / DMO1P & EN 1504-2:2004 / 1.3, 2.2, 8.2 Öffentliche Arbeiten Positionsnummer: 04.509