FOX MULTISEAL® FS477 is a cement and polymer dispersion based, two-component, fully elastic waterproofing material with crack-bridging capability at very low temperatures (-20°C), resistant to chlorinated water, designed for all reinforced concrete surfaces and cement-based renders. It complies with TS EN 14891:2017 standard and meets CMO2P requirements.

Colour Palette

Greenish Grey

Packaging

24 kg

8 kg

TDS

Product Description

FOX MULTISEAL® FS477 is a cement-based polymer-reinforced (CM) two-component waterproofing material. Component A consists of special cement, mineral fillers and polymer; Component B consists of liquid polymer dispersion. The product has a mix density of 1.54±0.05 kg/lt and is greenish grey in colour.

It complies with TS EN 14891:2017, the standard for liquid-applied waterproof products for use under ceramic tiling in wet areas, and meets the CMO2P classification. It features crack-bridging down to -20°C (O2) and resistance to contact with chlorinated water (P).

Applied by brush or spray machine in two or three coats to achieve a minimum total dry film thickness of 2 mm. Application temperature must be between +5°C and +30°C; service temperature range is -20°C / +80°C. At +23°C, mechanical strength is achieved after 2 days and waterproofing after 7 days.

Key Benefits

Retains its flexibility and crack-bridging properties even at very low temperatures (-20°C); can be used safely in cold climate conditions.
Technical competence is documented by compliance with TS EN 14891:2017 CMO2P class standard.
Provides long-lasting protection in swimming pools and water tanks thanks to its proven resistance to chlorinated water.
Easy to apply by brush or spray machine; enables fast and efficient application over large surfaces.
Eliminates the risk of water infiltration by forming a continuous, seamless and jointless waterproofing layer.
Water vapour permeability reduces the risk of blistering and delamination caused by vapour pressure that may build up beneath the coating.

Advantages

Flexible and waterproof.
Retains its flexibility even at very low temperatures (-20°C).
Easy to prepare and apply.
Can be applied by brush or spray machine.
Excellent adhesion and crack-bridging properties.
Forms a waterproof layer under screed and ceramic tiles.
Creates a seamless, jointless, permanent, waterproof insulation layer.
Resistant to chemicals in soil and salt solutions.
Water vapour permeable.
High durability.
Resistant to freeze-thaw cycles.
Can be used in areas subject to movement and vibration.

Property	Value
Material Composition – Component A	Special cement, Mineral fillers, Polymer
Material Composition – Component B	Liquid Polymer Dispersion
Colour	Greenish Grey
Mix Density	1,54±0,05 kg/lt
Substrate Application Temperature	+5°C / +30°C
Service Temperature	-20°C / +80°C
Initial Tensile Adhesion (TS EN 14891/A.6.2)	≥0,50 N/mm²
Tensile Adhesion After Water Immersion (TS EN 14891/A.6.3)	≥0,50 N/mm²
Tensile Adhesion After Heat Ageing (TS EN 14891/A.6.5)	≥0,50 N/mm²
Tensile Adhesion After Freeze-Thaw (TS EN 14891/A.6.6)	≥0,50 N/mm²
Tensile Adhesion After Contact with Chlorinated Water (TS EN 14891/A.6.7-6.8)	≥0,50 N/mm²
Tensile Adhesion After Contact with Lime Water (TS EN 14891/A.6.9)	≥0,50 N/mm²
Waterproofing (TS EN 14891/A.7)	No Water Passage and ≤20 g weight increase
Crack Bridging (+23°C) (TS EN 14891/A.8.3)	≥0,75 mm
Crack Bridging (-20°C) (TS EN 14891/A.8.3)	≥0,75 mm
Pot Life	2 hours
Maturation Time	3-5 min
Minimum Application Thickness	≥2 mm
Ready for Use – Mechanical Strength	after 2 days
Ready for Use – Waterproofing	after 7 days
Overcoating – Render	3 days
Overcoating – Ceramic	3 days
Shelf Life	12 months (in original packaging, +5°C / +30°C)
Mixing Ratio	24 kg Component A : 8 kg Component B
Standard Compliance	TS EN 14891:2017, CMO2P

Usage Areas

In interior and exterior applications, on horizontal and vertical surfaces, from the positive side where water is present
In swimming pools
In water and balance tanks
In all wet areas such as bathrooms, balconies, kitchens, etc.
On foundations, retaining walls and basement walls
On terraces, provided the surface is subsequently covered

Application Steps

1
Surface Preparation
The surface to be treated must be sound and free from all oil, grease, rust, paraffin, paint and bitumen residues that could impair adhesion, and all loose particles must be removed. Iron and wooden plugs on the surface must be removed and any active water leaks must be plugged with FOX PLUG FC340. Existing voids, uneven surfaces and corner edges (chamfer of at least 4 cm) must be repaired with FOX MORTAR FC188 T repair mortar. The surface must be dampened before application.
2
Mixing
Pour 2/3 of FOX MULTISEAL® FS477 Component B into a clean mixing container. Slowly add Component A while mixing with an electric mixer at 400–600 rpm for approximately 2–3 minutes. Allow the paste-consistency mixture to mature for 3–5 minutes; then add the remaining Component B and mix for a further 1–2 minutes. Mixing ratio: 24 kg Component A + 8 kg Component B.
3
Application
Apply the prepared FOX MULTISEAL® FS477 mixture by waterproofing brush or spray machine in two or three coats to achieve a minimum dry film thickness of 2 mm. The direction of brush application for each coat must be perpendicular to the previous one. The wet film thickness per coat must not exceed 1.30 mm. The waiting time between coats varies according to ambient conditions. FOX TRIPLETAPE 120 chamfer tape or a 20 cm wide alkali-resistant, finish-free mesh must be embedded at corner joints. If the surface is to be covered with ceramic, marble, etc., it is recommended to use a flexible tile adhesive with C2ES1/C2TES1/C2TES2 properties in accordance with EN 12004-1 standard.
4
Cleaning of Tools
Tools and equipment used after application must be cleaned with water.

Critical

Application must not be carried out if the ambient and surface temperature is below +5°C or above +30°C; appropriate temperatures must be awaited.

Critical

Application must not be carried out in extremely hot, rainy or windy weather.

Critical

For exterior surface applications, the surface must be protected from sunlight, wind, rain or frost for the first 24 hours.

Critical

For the material to complete its curing, the ambient and substrate temperature must not fall below the permitted minimum temperature.

Critical

The wet film thickness per coat must not exceed 1.30 mm.

Important

FOX MULTISEAL® FS477 applied at +23°C gains mechanical strength after 2 days, becomes waterproof after 7 days, and reaches its final strength after 28 days.

Important

FOX TRIPLETAPE 120 chamfer tape must be applied to corner joints in the application area. Where chamfer tape is not available, after forming a corner chamfer, an alkali-resistant, finish-free mesh 20 cm wide must be embedded in the waterproofing material at the corners.

Important

Areas that need to be walked on must be covered with screed containing FOX BINDER FM125 additive.

Information

The working and reaction times of cement and acrylic-based systems are affected by ambient and substrate temperature and relative humidity. Reaction slows at low temperatures; high temperatures accelerate the reaction.

Important

FOX MULTISEAL® FS477 Component B freezes at temperatures below 0°C. Opened packages must be tightly resealed, stored under appropriate conditions and used within one week.

Information

When stored correctly at room temperature, away from direct sunlight, between +5°C and +30°C, the shelf life is 12 months from the date of manufacture.

Critical

Contact with skin and eyes must be avoided during storage and application. In case of contact, wash immediately with plenty of water and soap; if swallowed, seek medical attention immediately.

Important

Appropriate work clothing, protective gloves, goggles and a mask must be worn in accordance with occupational health and safety regulations during application.

Important

Must be stored out of reach of children. Food and beverages must not be brought into application areas.

Related Products

OUR PRINCIPLES FOR PROCESSING PERSONAL DATA

All personal data processed by our Company is processed only in accordance with the procedures and principles laid down in the Law and in other laws. Pursuant to Article 4 of the KVKK, the basic principles we observe when processing your personal data are as follows:

Being processed lawfully and in accordance with the rules of good faith.
Being accurate and, where necessary, up to date.
Being processed for specific, explicit and legitimate purposes.
Being relevant, limited and proportionate to the purposes for which they are processed.
Being retained for the period stipulated in the relevant legislation or required for the purpose for which they are processed.

CATEGORIES OF DATA SUBJECTS

A separate policy applies to the processing of the personal data of our employees (including interns and subcontractor employees) whose personal data are processed by our Company. Data subjects other than employees, such as customers, potential customers, visitors, job candidates/interns and the employees, shareholders and officers of the institutions we cooperate with, may also address their requests to our Company under the KVKK.

PURPOSE OF PROCESSING AND TRANSFERRING PERSONAL DATA

Our Company processes personal data only for the purposes and under the conditions set out in the personal data processing conditions specified in Article 5, paragraph 2 and Article 6, paragraph 3 of Law No. 6698 on the Protection of Personal Data. Personal data may be processed where at least one of the items listed below is present:

The existence of the explicit consent of the data subject,
Being expressly provided for by law,
Being necessary for the protection of the life or physical integrity of the person himself or herself or of another person, where that person is unable to give consent due to actual impossibility or whose consent is not deemed legally valid,
Being necessary to process the personal data of the parties to a contract, provided that it is directly related to the conclusion or performance of that contract,
Being mandatory for the data controller to fulfil its legal obligation,
Having been made public by the data subject,
Being mandatory for the establishment, exercise or protection of a right,
Being mandatory for the legitimate interests of the data controller, provided that it does not harm the fundamental rights and freedoms of the data subject.

Under the conditions stated above, our Company may process personal data for the following purposes:

Evaluating potential suppliers/business partners,
Establishing and managing customer relations,
Conducting and concluding the contract process with our suppliers/business partners,
Conducting direct marketing processes,
Communication and support (upon your request),
Compliance with legal obligations,
Protecting the interests of the Company and ensuring its security,
Planning and carrying out the Company's commercial activities,
Reporting and auditing,
Protection of rights and interests.

We share your Personal Data with other parties, including professional advisers such as those listed below:

We share your personal data and your special categories of personal data, within the framework of legal grounds and your consent and within the scope of the personal data processing purposes stated above, with public institutions and organisations, banks, insurance companies, auditors, lawyers, accountants, other external professional advisers, the Joint Health and Safety Unit for the purpose of fulfilling occupational health and safety obligations, law enforcement authorities in line with our legal obligations, domestic and foreign service providers from which we receive services within the scope of marketing activities where consent has been given, and our contracted workplace physician.

WHEN DO WE COLLECT PERSONAL DATA ABOUT YOU?

We collect your personal data in the following cases:

When you visit our Company, or purchase or use our products and services,
If you are a natural or legal person purchasing goods and services from our Company,
When you sell us goods or provide us with services,
When you choose to receive our marketing communications,
When you contact us through our website, e-mail, social media platforms, other online channels or by telephone,
When you take part in our company events, social responsibility projects and organisations,
When you contact us for any purpose as a potential customer, supplier, business partner or subcontractor,
If you have applied for a job with our Company in any way or have made your CV and related information available for our Company's review.

We will process the personal data we obtain in the above cases only in accordance with this Notice.

WHICH OF YOUR PERSONAL DATA DO WE PROCESS?

Our personal data processing methods operate through our website, by telephone or e-mail, through electronic applications specific to our customers, through your participation in our business events and surveys, or through your interaction with us in any other way. In this context, the categories of personal data we process about you are as follows:

Identity information
Contact information
Images and/or videos that may identify you
Financial data
Any other information you decide to share with our Company of your own accord
Automatically collected electronic data
Legal transaction and compliance information
Corporate customer/Supplier data
Incident management and security information
Personal data collected from other sources

ON WHICH LEGAL GROUNDS DO WE PROCESS YOUR PERSONAL DATA?

Personal data is collected, used, recorded, stored and processed by our Company by providing data subjects with clear and comprehensible written information and, where necessary, obtaining their explicit consent, lawfully and in accordance with the rules of good faith, in a manner connected with and limited to the legitimate purpose clearly stated above, and within the framework of the principle of proportionality.

We process your personal data in line with the following legal grounds, which are set out in Article 5 of the KVKK and also appear under the heading "Purpose of Processing and Transferring Personal Data" of this policy, in particular the Turkish Commercial Code No. 6102, the Turkish Code of Obligations No. 6098, the Tax Procedure Law No. 213 and electronic commerce legislation:

The existence of the explicit consent of the data subject,
Being expressly provided for by law,
Being necessary for the protection of the life or physical integrity of the person himself or herself or of another person, where that person is unable to give consent due to actual impossibility or whose consent is not deemed legally valid,
Being necessary to process the personal data of the parties to a contract, provided that it is directly related to the conclusion or performance of that contract,
Being mandatory for the data controller to fulfil its legal obligation,
Having been made public by the data subject,
Being mandatory for the establishment, exercise or protection of a right,
Being mandatory for the legitimate interests of the data controller, provided that it does not harm the fundamental rights and freedoms of the data subject.

Where your Personal Data is processed on the basis of explicit consent, we would like to point out that if you withdraw your explicit consent, you will be removed from the commercial membership programme for which the processing based on that explicit consent is necessary, and that as of the relevant date you will no longer be able to benefit from the advantages you enjoyed through such processing.

RETENTION AND DESTRUCTION PERIODS FOR PERSONAL DATA

Your personal data will be stored for the retention periods specified in the relevant legislation or for as long as the processing purposes mentioned above require. At the end of this period, the data will be deleted, destroyed or anonymised in full compliance with the KVKK. In this context, a Personal Data Retention and Destruction Policy and the related procedures have been prepared and are applied.

HOW DO WE PROTECT YOUR PERSONAL DATA?

In order to protect your personal data and to prevent unlawful access to it, our Company takes the necessary administrative and technical measures in line with the Personal Data Security Guide published by the Personal Data Protection Authority, draws up internal procedures, prepares disclosure and explicit consent texts and, pursuant to Article 12/3 of the KVKK, carries out, or has carried out through external services, the audits necessary to ensure the implementation of the provisions of the KVKK.

WHAT ARE YOUR RIGHTS REGARDING YOUR PERSONAL DATA?

Pursuant to Article 11 of the KVKK, everyone has the following rights concerning themselves by applying to the data controller:

To learn whether personal data is processed,
To request information if personal data has been processed,
To learn the purpose of processing personal data and whether it is used in accordance with that purpose,
To know the third parties to whom personal data is transferred in Turkey or abroad,
To request the correction of personal data if it has been processed incompletely or incorrectly,
To request the deletion or destruction of personal data within the framework of the conditions set out in Article 7 of the KVKK,
To request that the operations carried out pursuant to subparagraphs (d) and (e) be notified to the third parties to whom the personal data has been transferred,
To object to a result arising against the person themselves through the analysis of the processed data exclusively by automated systems,
To request compensation for the damage suffered in the event of damage due to the unlawful processing of personal data.

TO MAKE A REQUEST UNDER THE PERSONAL DATA PROTECTION LAW

To obtain more detailed information about your Personal Data, you can access the information request application form from our company's website at https://www.foxbau.com/ and from the address Organize Sanayi Bölgesi 1. Kısım 7. Cadde No:6 Döşemealtı – Antalya / TÜRKİYE in person.

So that we can respond to your requests regarding your Personal Data as quickly as possible, your requests and questions must be submitted clearly, comprehensibly and with a specific date.

FOX MULTISEAL® FS477

Product Description

Key Benefits

Advantages

Usage Areas

Application Steps

Surface Preparation

Mixing

Application

Cleaning of Tools

Related Products