FOX PURMAX® POLYUREA TOPCOAT is a polyaspartic-based, two-component, aliphatic, high chemical resistance, low-viscosity, flexible, solvent-free and glossy topcoat. Thanks to its fast drying time, it offers an ideal solution for applications where downtime must be minimised.

Colour Palette

RAL Colour Range

Packaging

5 kg

TDS

Product Description

FOX PURMAX® POLYUREA TOPCOAT is a polyaspartic-based, two-component, aliphatic, high chemical resistance, low-viscosity, flexible, solvent-free and glossy topcoat. It is applied as a topcoat over FOX PURMAX® series polyurethane waterproofing systems and FOX PURMAX® Spraytec series waterproofing systems. It provides 4 times higher chemical and mechanical resistance compared to epoxy. Thanks to its ability to open to pedestrian traffic after approximately 2 hours, downtime is minimised.

Advantages

High chemical and mechanical resistance (4 times compared to epoxy).
Fast setting (can be opened to pedestrian traffic after approximately 2 hours).
Aliphatic coating.
Flexible.
Easy to maintain and clean.
Provides hygienic environments.
Glossy topcoat finish.
High adhesion strength.

Property	Value
Density	1,43 gr/cm³
Colour	RAL Colours
Adhesion Strength – Concrete	>3,85 N/mm²
Adhesion Strength – Steel	>1,92 N/mm²
Thinning	Not thinnable
Substrate Temperature	+10°C / +25°C
Pot Life	25 minutes
Time to Pedestrian Traffic	2 hours
Full Cure Time	7 days
Shelf Life	6 months (from date of manufacture)
Storage Temperature	+5°C / +30°C

Usage Areas

As a topcoat over Fox Purmax® series polyurethane waterproofing systems and Fox Purmax® Spraytec series waterproofing systems
Terraces exposed to UV and solar radiation
Terraces, balconies and all wet areas
Roof and garden terraces
Swimming pools and ornamental ponds
Aircraft hangars
Car park coatings
Water supply lines and channels
Underground water tanks
Tunnels
Canals
Warehouses
Collection tanks
Prefabricated structures
Steel structures
Wide-span terraces
Roof gutters
Planter waterproofing

Application Steps

1
Surface Preparation
The surface to be coated must be free of dust, dirt, oil and any other substances that could impair adhesion. Concrete surfaces must be at least 3 weeks old, surface temperature must be a minimum of +10°C, and moisture content must be below 4%. Application must be carried out within the recoating window of the coating system. If applying over existing coatings, consult Technical Services.
2
Checking Application Conditions
Surface, ambient and material temperature must be between a minimum of +10°C and a maximum of +25°C. Relative humidity must be a maximum of 60%. Substrate temperature must be at least +3°C above the dew point. Rising damp must be checked using the ASTM polyethylene sheet test.
3
Mixing
Before mixing, ensure that product temperatures are between +10°C and +25°C. Thoroughly mix component A on its own using an electric mixer (300–400 rpm) and a suitable epoxy/polyurethane resin mixing tip. After adding component B entirely into component A, mix continuously for at least 3 minutes until a homogeneous mixture is obtained. Avoid over-mixing to minimise air entrainment.
4
Application
FOX PURMAX® POLYUREA TOPCOAT is poured onto the surface in equal amounts and at equal intervals, then applied using a roller or airless spray machine. Pot life is 25 minutes at +23°C; application must be completed within this time.
5
Tool and Equipment Cleaning
After application, tools and equipment must be cleaned with solvent or polyurethane thinner. Once FOX PURMAX® POLYUREA TOPCOAT has cured, it can only be removed from surfaces by mechanical means.
6
Curing and Protection
After application is complete, the coating must be protected from direct water contact for at least 24 hours. Pedestrian traffic is possible after approximately 2 hours; full cure is achieved after 7 days. Ambient and substrate temperatures must not fall below the specified minimum levels.

Critical

Concrete surfaces to be coated must be at least 3 weeks old prior to application.

Critical

Surface temperature must be minimum +10°C, maximum +25°C; ambient temperature minimum +10°C, maximum +25°C; material temperature minimum +10°C, maximum +25°C.

Critical

Surface moisture content must be below 4%. There must be no rising damp according to ASTM (polyethylene sheet test).

Critical

Relative humidity must be a maximum of 60%.

Critical

The substrate temperature must be at least +3°C above the dew point. If condensation has formed on the coating, it must be dried with a dry mop.

Critical

After application is complete, the coating must be protected from direct water contact for at least 24 hours. In case of water contact, softening and blistering may occur on the coating; in this case the coating must be completely removed and reapplied.

Critical

Mixing must be carried out with an electric mixer at 300–400 rpm and an epoxy/polyurethane resin mixing tip. Failure to use the specified mixing tip will result in air bubbles forming on the coating.

Important

Pot life is 25 minutes at +23°C. Higher temperatures shorten the pot life; lower temperatures extend it.

Important

Materials should be brought to the application site 1–2 days in advance and allowed to acclimatise to ambient conditions.

Important

In cold weather, containers should be conditioned at +20°C – +25°C before use.

Important

Rain, dust, wind, animals and insects must be prevented from entering the area while the coating is still fresh.

Important

A vapour barrier layer must be installed on floors resting on soil.

Important

Store in original unopened packaging in a cool and dry environment between +5°C and +30°C, protected from frost. Shelf life is 6 months from the date of manufacture.

Critical

It is dangerous to approach storage and application areas with open flames; these areas must be ventilated.

Critical

Work clothing, protective gloves, goggles and a mask must be worn during application. Avoid contact with skin and eyes; in case of contact, wash thoroughly with plenty of water and soap. If swallowed, seek medical attention immediately.

Related Products

OUR PRINCIPLES FOR PROCESSING PERSONAL DATA

All personal data processed by our Company is processed only in accordance with the procedures and principles laid down in the Law and in other laws. Pursuant to Article 4 of the KVKK, the basic principles we observe when processing your personal data are as follows:

Being processed lawfully and in accordance with the rules of good faith.
Being accurate and, where necessary, up to date.
Being processed for specific, explicit and legitimate purposes.
Being relevant, limited and proportionate to the purposes for which they are processed.
Being retained for the period stipulated in the relevant legislation or required for the purpose for which they are processed.

CATEGORIES OF DATA SUBJECTS

A separate policy applies to the processing of the personal data of our employees (including interns and subcontractor employees) whose personal data are processed by our Company. Data subjects other than employees, such as customers, potential customers, visitors, job candidates/interns and the employees, shareholders and officers of the institutions we cooperate with, may also address their requests to our Company under the KVKK.

PURPOSE OF PROCESSING AND TRANSFERRING PERSONAL DATA

Our Company processes personal data only for the purposes and under the conditions set out in the personal data processing conditions specified in Article 5, paragraph 2 and Article 6, paragraph 3 of Law No. 6698 on the Protection of Personal Data. Personal data may be processed where at least one of the items listed below is present:

The existence of the explicit consent of the data subject,
Being expressly provided for by law,
Being necessary for the protection of the life or physical integrity of the person himself or herself or of another person, where that person is unable to give consent due to actual impossibility or whose consent is not deemed legally valid,
Being necessary to process the personal data of the parties to a contract, provided that it is directly related to the conclusion or performance of that contract,
Being mandatory for the data controller to fulfil its legal obligation,
Having been made public by the data subject,
Being mandatory for the establishment, exercise or protection of a right,
Being mandatory for the legitimate interests of the data controller, provided that it does not harm the fundamental rights and freedoms of the data subject.

Under the conditions stated above, our Company may process personal data for the following purposes:

Evaluating potential suppliers/business partners,
Establishing and managing customer relations,
Conducting and concluding the contract process with our suppliers/business partners,
Conducting direct marketing processes,
Communication and support (upon your request),
Compliance with legal obligations,
Protecting the interests of the Company and ensuring its security,
Planning and carrying out the Company's commercial activities,
Reporting and auditing,
Protection of rights and interests.

We share your Personal Data with other parties, including professional advisers such as those listed below:

We share your personal data and your special categories of personal data, within the framework of legal grounds and your consent and within the scope of the personal data processing purposes stated above, with public institutions and organisations, banks, insurance companies, auditors, lawyers, accountants, other external professional advisers, the Joint Health and Safety Unit for the purpose of fulfilling occupational health and safety obligations, law enforcement authorities in line with our legal obligations, domestic and foreign service providers from which we receive services within the scope of marketing activities where consent has been given, and our contracted workplace physician.

WHEN DO WE COLLECT PERSONAL DATA ABOUT YOU?

We collect your personal data in the following cases:

When you visit our Company, or purchase or use our products and services,
If you are a natural or legal person purchasing goods and services from our Company,
When you sell us goods or provide us with services,
When you choose to receive our marketing communications,
When you contact us through our website, e-mail, social media platforms, other online channels or by telephone,
When you take part in our company events, social responsibility projects and organisations,
When you contact us for any purpose as a potential customer, supplier, business partner or subcontractor,
If you have applied for a job with our Company in any way or have made your CV and related information available for our Company's review.

We will process the personal data we obtain in the above cases only in accordance with this Notice.

WHICH OF YOUR PERSONAL DATA DO WE PROCESS?

Our personal data processing methods operate through our website, by telephone or e-mail, through electronic applications specific to our customers, through your participation in our business events and surveys, or through your interaction with us in any other way. In this context, the categories of personal data we process about you are as follows:

Identity information
Contact information
Images and/or videos that may identify you
Financial data
Any other information you decide to share with our Company of your own accord
Automatically collected electronic data
Legal transaction and compliance information
Corporate customer/Supplier data
Incident management and security information
Personal data collected from other sources

ON WHICH LEGAL GROUNDS DO WE PROCESS YOUR PERSONAL DATA?

Personal data is collected, used, recorded, stored and processed by our Company by providing data subjects with clear and comprehensible written information and, where necessary, obtaining their explicit consent, lawfully and in accordance with the rules of good faith, in a manner connected with and limited to the legitimate purpose clearly stated above, and within the framework of the principle of proportionality.

We process your personal data in line with the following legal grounds, which are set out in Article 5 of the KVKK and also appear under the heading "Purpose of Processing and Transferring Personal Data" of this policy, in particular the Turkish Commercial Code No. 6102, the Turkish Code of Obligations No. 6098, the Tax Procedure Law No. 213 and electronic commerce legislation:

The existence of the explicit consent of the data subject,
Being expressly provided for by law,
Being necessary for the protection of the life or physical integrity of the person himself or herself or of another person, where that person is unable to give consent due to actual impossibility or whose consent is not deemed legally valid,
Being necessary to process the personal data of the parties to a contract, provided that it is directly related to the conclusion or performance of that contract,
Being mandatory for the data controller to fulfil its legal obligation,
Having been made public by the data subject,
Being mandatory for the establishment, exercise or protection of a right,
Being mandatory for the legitimate interests of the data controller, provided that it does not harm the fundamental rights and freedoms of the data subject.

Where your Personal Data is processed on the basis of explicit consent, we would like to point out that if you withdraw your explicit consent, you will be removed from the commercial membership programme for which the processing based on that explicit consent is necessary, and that as of the relevant date you will no longer be able to benefit from the advantages you enjoyed through such processing.

RETENTION AND DESTRUCTION PERIODS FOR PERSONAL DATA

Your personal data will be stored for the retention periods specified in the relevant legislation or for as long as the processing purposes mentioned above require. At the end of this period, the data will be deleted, destroyed or anonymised in full compliance with the KVKK. In this context, a Personal Data Retention and Destruction Policy and the related procedures have been prepared and are applied.

HOW DO WE PROTECT YOUR PERSONAL DATA?

In order to protect your personal data and to prevent unlawful access to it, our Company takes the necessary administrative and technical measures in line with the Personal Data Security Guide published by the Personal Data Protection Authority, draws up internal procedures, prepares disclosure and explicit consent texts and, pursuant to Article 12/3 of the KVKK, carries out, or has carried out through external services, the audits necessary to ensure the implementation of the provisions of the KVKK.

WHAT ARE YOUR RIGHTS REGARDING YOUR PERSONAL DATA?

Pursuant to Article 11 of the KVKK, everyone has the following rights concerning themselves by applying to the data controller:

To learn whether personal data is processed,
To request information if personal data has been processed,
To learn the purpose of processing personal data and whether it is used in accordance with that purpose,
To know the third parties to whom personal data is transferred in Turkey or abroad,
To request the correction of personal data if it has been processed incompletely or incorrectly,
To request the deletion or destruction of personal data within the framework of the conditions set out in Article 7 of the KVKK,
To request that the operations carried out pursuant to subparagraphs (d) and (e) be notified to the third parties to whom the personal data has been transferred,
To object to a result arising against the person themselves through the analysis of the processed data exclusively by automated systems,
To request compensation for the damage suffered in the event of damage due to the unlawful processing of personal data.

TO MAKE A REQUEST UNDER THE PERSONAL DATA PROTECTION LAW

To obtain more detailed information about your Personal Data, you can access the information request application form from our company's website at https://www.foxbau.com/ and from the address Organize Sanayi Bölgesi 1. Kısım 7. Cadde No:6 Döşemealtı – Antalya / TÜRKİYE in person.

So that we can respond to your requests regarding your Personal Data as quickly as possible, your requests and questions must be submitted clearly, comprehensibly and with a specific date.

FOX PURMAX® POLYUREA TOPCOAT

Product Description

Advantages

Usage Areas

Application Steps

Surface Preparation

Checking Application Conditions

Mixing

Application

Tool and Equipment Cleaning

Curing and Protection

Related Products