FOX BETONAGE® HP is an acrylic-based, ready-to-use, fine-textured decorative micro-concrete coating material suitable for unique surfaces, applicable to both floors and walls in a multi-layer structure. It gives the space a seamless and aesthetic appearance while offering high abrasion and scratch resistance.
Colour Palette
Packaging
7 kg
Product Description
FOX BETONAGE® HP is a ready-to-use, fine-textured decorative micro-concrete coating material composed of acrylic, mineral fillers and polymer additives. It can be applied to both wall and floor surfaces in interior and exterior environments, providing aesthetic and durable surfaces in shops, showrooms, offices, hotels, restaurants, cafés, residences, shopping centres, museums and galleries. The product has a density of 1.65 ± 0.05 g/cm³, offers a bond strength of ≥1.5 N/mm² according to EN 1542, capillary water impermeability of w<0.1 kg/m².h⁰·⁵ according to EN 1062-3, and water vapour permeability class EN ISO 7783 V₂. Its UV-resistant structure and variety of colour options make it ideal for versatile decorative applications.
Advantages
- Gives the space a continuous, seamless appearance.
- Can be applied to any surface and object.
- Resistant to UV radiation.
- Water-impermeable.
- Provides high resistance to scratching and abrasion.
- Available in different colour options.
Usage Areas
- Indoors and outdoors, on walls and floors
- In shops and showrooms
- In offices
- In hotels, restaurants and cafés
- In residences
- In shopping centres
- In museums and galleries
Application Steps
- 1
Surface Preparation
Concrete substrates to be coated must be prepared using abrasive equipment such as shot blasting, milling or diamond grinding to remove the cement laitance and achieve an open-porous surface. Weak concrete fragments must be removed, small voids and holes must be fully opened, and the resulting dust must be cleaned with an industrial vacuum cleaner.
- 2
Mixing
Before application, the material must be thoroughly mixed until a homogeneous consistency is achieved.
- 3
Surface Priming
To improve the adhesion of the coating material to the surface, reduce air bubbles and prevent the mixing liquid from being absorbed by the surface, FOX PRIMERA® FL220 is first applied uniformly with a brush or roller. On surfaces with a high absorption risk, the consumption rate should be increased and ponding on the surface must not be allowed. FOX DECOPRIMER FL204 is then applied with a suitable roller. After approximately 4 hours, a paper (masking) tape is applied to check whether the surface is ready; when the tape is removed, there must be no dust on the tape surface.
- 4
Coating Application
Stir the ready-to-use product for approximately 1 minute. Pour FOX DOMINO COLOR WB AC equivalent to 1% of the total weight and mix until the colour is homogeneous. Dampen the surface to be coated. Pour the homogeneous mixture onto the surface and spread it with a suitable trowel.
- 5
Sanding and Cleaning
Once the material has dried, sand the surface with 80-grit sandpaper. After sanding is complete, vacuum the surface with an electric vacuum cleaner and wipe with a damp cloth.
- 6
Top Coat (Optional)
Optionally, the application can be completed by applying FOX PURATHANE® TOPCOAT WB clear matt.
- 7
Tool Cleaning
After application, all tools and equipment used must be cleaned with water before they dry.
Critical
Application should not be carried out if the ambient and surface temperature is below +5°C or above +30°C; suitable temperatures must be awaited.
Critical
Application should not be carried out in extremely hot, rainy or very windy weather.
Critical
For outdoor applications, the surface must be protected from sunlight, rain, wind and frost for the first 24 hours.
Important
To allow the material to fully cure, the temperature of the applied substrate and the ambient temperature must not fall below the permitted minimum temperature.
Information
High temperatures accelerate hydration and shorten the working time; low temperatures extend the working time.
Important
Shelf life is 12 months from the date of manufacture. Opened packages must be resealed and consumed within 1 week.
Important
Must be stored in its original unopened packaging, in a cool and dry environment, protected from frost, between +5°C and +30°C.
Information
The VOC content of this product (category IIA/l type wb) EU limit value max. 200 g/l (2010); this product contains <200 g/l VOC.
Important
During application, appropriate work clothing, protective gloves, goggles and a mask must be worn in accordance with occupational health and safety regulations.
Critical
During storage and application, the product must not come into contact with skin or eyes; in case of contact, wash immediately with plenty of water and soap; if swallowed, seek medical attention immediately.
Important
Must be stored out of reach of children.
