FOX STONECARPET® BINDER PU 1K is a single-component, polyurethane-based, aliphatic binder for specially selected crushed and tumbled natural-coloured aggregates that does not yellow under UV or sunlight exposure. Suitable for application on horizontal surfaces both indoors and outdoors, its solvent-free formulation creates safe and aesthetically pleasing surfaces.
Packaging
5 kg
Product Description
FOX STONECARPET® BINDER PU 1K is a single-component, polyurethane-based, aliphatic binder for specially selected crushed and tumbled natural-coloured aggregates that does not yellow under UV or sunlight exposure. Its solvent-free formulation makes it safe for use in both indoor and outdoor environments. It is designed for use as a binder in FOX STONECARPET®, FOX PEBBLEDECK and FOX ECODRAIN systems. It is the preferred choice for high-traffic areas such as airports, hospitals, galleries, shopping centres, shops and showrooms, and hotels. It becomes rain-resistant just 1 hour after application, can be opened to pedestrian traffic within 6 hours, and reaches full cure in 24 hours. With high flexural (≥6 N/mm²) and compressive (≥15 N/mm²) strength, it delivers long-lasting coating performance.
Advantages
- Suitable for indoor and outdoor use.
- Ready to use.
- Rain-resistant 1 hour after application.
- UV-resistant, does not yellow.
- Can be used as a binder for permeable surfaces.
- Solvent-free.
- Provides an aesthetic appearance to the surface.
- Long-lasting.
- Different aggregate sizes can create different visual effects.
Usage Areas
- Indoors and outdoors
- On horizontal surfaces
- As a binder in FOX STONECARPET®, FOX PEBBLEDECK and FOX ECODRAIN systems
- In airports
- In hospitals
- In galleries
- In shopping centres
- In shops and showrooms
- In hotels
Application Steps
- 1
Surface Preparation
The concrete substrate to be coated must be mechanically abraded using shot blasting, milling or diamond grinding equipment to remove laitance and open the pores. Weak concrete sections must be removed; small voids and holes must be fully opened and the resulting dust cleaned with an industrial vacuum. Substrate repairs and void filling must be carried out with FOX MORTAR FC188 T repair mortar. The substrate must have a compressive strength of at least 25 N/mm², a tensile strength of at least 1.5 N/mm², a moisture content of maximum 4%; the substrate temperature must be a minimum of +10°C and at least +3°C above the dew point.
- 2
Priming
Surfaces to be coated must be pre-primed with FOX EPOTHANE® PRIMER WB, FOX EPOTHANE PRIMER WB COLORED or FOX EPOTHANE PRIMER HB.
- 3
Mixing
The aggregate and FOX STONECARPET® BINDER PU 1K must be mixed using an electric mixer at 300–400 rpm with an epoxy/polyurethane resin mixing paddle for approximately 3–4 minutes until a homogeneous mixture is obtained. Over-mixing should be avoided to minimise air entrainment.
- 4
Application
The prepared mixture is poured onto the surface and spread to the desired thickness using a suitable trowel or screed. The aggregates must be compacted thoroughly; otherwise the coating will be excessively porous and the surface will feel rough. To allow the trowel to move more easily across the surface, it should be lightly moistened by spraying with FOX C380. Local accumulation of binder must be avoided; residue at the bottom and sides of the mixing bucket must be placed in a separate waste container and must not be used in the application.
- 5
Curing and Protection
After application is complete, the coating must be protected from direct water contact for at least 1 hour. Opening to pedestrian traffic is after 6 hours, full cure after 24 hours, and full curing after 7 days.
- 6
Tool and Equipment Cleaning
Tools and equipment used must be cleaned with solvents such as FOX CS810 or FOX C380 before the product hardens. Hardened product can only be removed by mechanical means.
Critical
The concrete substrate to be coated must be at least 3 weeks old; ambient and surface temperature must be a minimum of +10°C and a maximum of +30°C.
Critical
After application is complete, the coating must be protected from direct water contact for at least 1 hour. If water contact occurs, softening and blistering will develop; the coating must be completely removed and reapplied.
Critical
Surface moisture content must be below 4%. There must be no rising damp according to ASTM (polyethylene sheet test).
Critical
The substrate temperature must be at least +3°C above the dew point. Dew formation and condensation will damage the coating.
Important
Excessive accumulation of binder at a single point may cause white staining on the surface. Residue concentrated at the bottom and sides of the mixing bucket must be scraped off into a separate waste container and must not be used in the application.
Important
Mixing must always be carried out with an electric mixer at 300–400 rpm using an epoxy/polyurethane resin mixing paddle. If the specified mixing paddle is not used, air will be entrained into the product, causing air bubbles on the coating surface.
Important
Relative air humidity must not exceed 80%.
Important
Surfaces to receive FOX STONECARPET® BINDER PU 1K must be pre-primed with FOX EPOTHANE® PRIMER WB / FOX EPOTHANE PRIMER WB COLORED / FOX EPOTHANE PRIMER HB.
Important
Materials to be used should be brought to the application site 1–2 days in advance and allowed to acclimatise to ambient conditions.
Important
In cold weather, to improve workability, packaging should be conditioned at +20°C to +25°C before use.
Important
Rain, dust, wind, animals and insects must be prevented from entering the building while the coating is still fresh.
Important
Mixtures that have been left too long or whose consistency has changed must not be used.
Important
The product must be stored in its original unopened packaging in a dry, cool environment (+5°C to +30°C), protected from sunlight and frost. Shelf life is 6 months from the date of manufacture. Opened packaging must be consumed within 1 week.
Information
Pallets must not be stacked on top of each other during storage; shipment must follow a first-in, first-out system.
Critical
Open flames near storage and application areas are dangerous; areas must be ventilated. Protective clothing, gloves, goggles and a mask must be worn during application.
Critical
In case of contact with skin or eyes, wash immediately with plenty of water and soap. If swallowed, seek medical attention immediately. Keep out of reach of children.
Information
Consumption figures are given for ideal conditions assuming an ambient and surface temperature of +20°C. Consumption may increase on uneven surfaces and in cold weather conditions.
