FOX CERAFLEX® FX114 is a cement and polymer-based flexible (flex) tile adhesive mortar with reduced slip, extended working time, and high bonding performance. It meets the TS EN 12004-1:2017 C2TES1 classification and is suitable for ceramic, tile, porcelain tile, and natural stone applications in all climatic conditions, both indoors and outdoors.

Colour Palette

Packaging

25 kg

TDS

Product Description

FOX CERAFLEX® FX114 is a flexible tile adhesive mortar with reduced slip, extended open time, and high bonding performance, composed of special cement, mineral fillers, and polymer additives. It meets the TS EN 12004-1:2017 C2TES1 classification; available in Grey and White colour options, it can be applied on horizontal and vertical surfaces in interior and exterior environments. With a service temperature range of -20°C to +80°C, the product is resistant to freeze-thaw cycles, vibrations, and substrate stresses caused by temperature differentials. Its reaction to fire classification is EN 13501-1 A2,s1-d0. It can also be used on underfloor-heated floors, swimming pools, hammams, and water tanks.

Advantages

Saves time and labour with its extended working time.
Does not slip on vertical applications.
Enables fast and easy application.
Has high bonding strength.
Flexible; unaffected by vibrations.
Resistant to freeze-thaw cycles.
Does not shrink.
Accommodates and withstands substrate stresses caused by temperature differentials.

Property	Value
Composition	Special cement, mineral fillers, polymer additive
Colour	Grey, White
Mortar Density	1,75±0,05 g/cm³
Adhesion Strength – Initial tensile (EN 12004-2:2017)	≥1,0 N/mm²
Adhesion Strength – After water immersion (EN 12004-2:2017)	≥1,0 N/mm²
Adhesion Strength – After heat ageing (EN 12004-2:2017)	≥1,0 N/mm²
Adhesion Strength – After freeze-thaw cycling (EN 12004-2:2017)	≥1,0 N/mm²
Application Thickness	3–10 mm
Application Substrate Temperature	+5°C / +30°C
Service Temperature	-20°C / +80°C
Maturation Time	3–5 minutes
Pot Life	~5 hours
Open Time – Tensile adhesion strength (EN 12004-2:2017)	30 min → ≥0,5 N/mm²
Flexibility – Transverse Deformation (EN 12004-2:2017)	≥2,5 mm (S1)
Slip (EN 12004-2:2017)	≤0,5 mm
Foot Traffic Time	after 24 hours
Grouting	after 24 hours
Reaction to Fire Classification (EN 13501-1)	A2,s1-d0
Standard Classification	TS EN 12004-1:2017 C2TES1
Shelf Life	12 months (in original packaging, under appropriate storage conditions)

Usage Areas

On interior and exterior surfaces, in vertical and horizontal applications
On all types of concrete screed, plaster, screed, and cement-based surfaces
For bonding tiles, ceramics, porcelain tiles, and natural stone onto waterproofing in wet areas such as bathrooms, balconies, and kitchens
On underfloor-heated and industrial floors
For tile-on-tile bonding in renovation and repair works
For bonding in swimming pools, hammams, water tanks, bathrooms, industrial floors, and cold storage facilities

Application Areas

Application Steps

1
Surface Preparation – Cement-Based Surfaces
Surfaces to be treated must be sound, free of dust and dirt, and level. Areas requiring repair must be repaired with INNO-CRETE series repair mortars at least 1 day in advance. If the surface temperature exceeds +25°C, the surface should be lightly dampened.
2
Surface Preparation – Other Surfaces (Aerated Concrete, Gypsum, Chipboard, etc.)
FOX PRIMERA® FL220 primer, diluted 1:1 with water, is applied to highly absorbent surfaces such as aerated concrete, gypsum plaster, chipboard, plasterboard, and lime plaster. Bonding may commence a minimum of 8 hours after primer application.
3
Surface Preparation – Wood-Based Panel Surfaces (OSB and Chipboards)
Wooden chipboards must contain a maximum of 10% moisture. Boards applied to floors must be at least 25 mm thick, and those applied to walls at least 19 mm thick. Boards must be screwed to the surface at 30 cm intervals; edge joints must be left at least 8 mm wide and filled with FOX PURSEAL PS600 (Polyurethane Mastic). In dry environments, they must be primed with FOX UNIPRIMER FL555 or FOX STUCPRIMER FL888.
4
Mixing
The amount of water indicated on the packaging is placed in a clean mixing container. FOX CERAFLEX® FX114 is gradually added to the water and mixed with a drill mixer at 400–600 rpm for approximately 2–3 minutes until a homogeneous consistency is achieved. After maturing for 3–5 minutes, the material is mixed for a further 1 minute and is then ready for application. Mixing ratio: for Grey, 25 kg/bag with ~7.75±0.25 litres of water; for White, 25 kg/bag with ~8.25±0.25 litres of water.
5
Application
A 1 mm layer of FOX CERAFLEX® FX114 is applied to the application surface using the flat side of the trowel. Within the open time (30 minutes), the material is spread over the area to be covered by drawing the notched side of the trowel in one direction to achieve a uniform thickness. It is also recommended to apply a 1 mm layer of FOX CERAFLEX® FX114 to the back face of tiles of varying thickness. Tiles are embedded by floating them into full contact with the mortar, leaving appropriate joint spacings.
6
Workability Test
If the adhesive sticks to the finger when pressed, application may continue. If it does not stick, the open time has elapsed; the adhesive must be scraped off and fresh material applied.
7
Grouting
Grouting may commence at the earliest 24 hours after installation. INNO-FIX Series grout fillers must be used to fill the joint gaps.
8
Tool Cleaning
All tools and equipment must be cleaned with water immediately after application is complete. Once FOX CERAFLEX® FX114 has hardened, it can only be removed from surfaces by mechanical means.

Critical

Application should not be carried out if the ambient or surface temperature is below +5°C or above +30°C; suitable temperatures must be awaited.

Critical

Application should not be carried out in extremely hot, rainy, or very windy weather.

Critical

For exterior applications, the surface must be protected from sunlight, rain, wind, and frost for the first 24 hours.

Critical

If the adhesive does not stick to the finger, the open time has elapsed; the adhesive must be scraped off and fresh adhesive applied.

Important

A minimum of 24 hours must be allowed before foot traffic and grouting.

Important

If the surface temperature exceeds +25°C, the surface should be lightly dampened before application.

Important

FOX PRIMERA® FL220 primer must be applied to highly absorbent surfaces (aerated concrete, gypsum plaster, chipboard, plasterboard, lime plaster) prior to bonding, and a minimum of 8 hours must be allowed.

Important

Wooden chipboards must contain a maximum of 10% moisture; they must be screwed to the surface at 30 cm intervals, and edge joints must be at least 8 mm wide.

Important

The product must be stored in its original unopened packaging in a dry and cool environment (between +5°C and +30°C), protected from sunlight and frost. Shelf life is 12 months from the date of manufacture.

Important

Opened packages must be resealed and consumed within 1 week.

Information

Working and reaction times for tile adhesive mortars are affected by air temperature, humidity, and substrate temperatures. The values above are valid at +23°C and 50% relative humidity.

Important

Work clothing, protective gloves, goggles, and a mask must be worn during application. In case of contact with skin or eyes, wash thoroughly with water and soap; if swallowed, seek medical attention immediately.

Important

Must be stored out of reach of children.

Related Products

OUR PRINCIPLES FOR PROCESSING PERSONAL DATA

All personal data processed by our Company is processed only in accordance with the procedures and principles laid down in the Law and in other laws. Pursuant to Article 4 of the KVKK, the basic principles we observe when processing your personal data are as follows:

Being processed lawfully and in accordance with the rules of good faith.
Being accurate and, where necessary, up to date.
Being processed for specific, explicit and legitimate purposes.
Being relevant, limited and proportionate to the purposes for which they are processed.
Being retained for the period stipulated in the relevant legislation or required for the purpose for which they are processed.

CATEGORIES OF DATA SUBJECTS

A separate policy applies to the processing of the personal data of our employees (including interns and subcontractor employees) whose personal data are processed by our Company. Data subjects other than employees, such as customers, potential customers, visitors, job candidates/interns and the employees, shareholders and officers of the institutions we cooperate with, may also address their requests to our Company under the KVKK.

PURPOSE OF PROCESSING AND TRANSFERRING PERSONAL DATA

Our Company processes personal data only for the purposes and under the conditions set out in the personal data processing conditions specified in Article 5, paragraph 2 and Article 6, paragraph 3 of Law No. 6698 on the Protection of Personal Data. Personal data may be processed where at least one of the items listed below is present:

The existence of the explicit consent of the data subject,
Being expressly provided for by law,
Being necessary for the protection of the life or physical integrity of the person himself or herself or of another person, where that person is unable to give consent due to actual impossibility or whose consent is not deemed legally valid,
Being necessary to process the personal data of the parties to a contract, provided that it is directly related to the conclusion or performance of that contract,
Being mandatory for the data controller to fulfil its legal obligation,
Having been made public by the data subject,
Being mandatory for the establishment, exercise or protection of a right,
Being mandatory for the legitimate interests of the data controller, provided that it does not harm the fundamental rights and freedoms of the data subject.

Under the conditions stated above, our Company may process personal data for the following purposes:

Evaluating potential suppliers/business partners,
Establishing and managing customer relations,
Conducting and concluding the contract process with our suppliers/business partners,
Conducting direct marketing processes,
Communication and support (upon your request),
Compliance with legal obligations,
Protecting the interests of the Company and ensuring its security,
Planning and carrying out the Company's commercial activities,
Reporting and auditing,
Protection of rights and interests.

We share your Personal Data with other parties, including professional advisers such as those listed below:

We share your personal data and your special categories of personal data, within the framework of legal grounds and your consent and within the scope of the personal data processing purposes stated above, with public institutions and organisations, banks, insurance companies, auditors, lawyers, accountants, other external professional advisers, the Joint Health and Safety Unit for the purpose of fulfilling occupational health and safety obligations, law enforcement authorities in line with our legal obligations, domestic and foreign service providers from which we receive services within the scope of marketing activities where consent has been given, and our contracted workplace physician.

WHEN DO WE COLLECT PERSONAL DATA ABOUT YOU?

We collect your personal data in the following cases:

When you visit our Company, or purchase or use our products and services,
If you are a natural or legal person purchasing goods and services from our Company,
When you sell us goods or provide us with services,
When you choose to receive our marketing communications,
When you contact us through our website, e-mail, social media platforms, other online channels or by telephone,
When you take part in our company events, social responsibility projects and organisations,
When you contact us for any purpose as a potential customer, supplier, business partner or subcontractor,
If you have applied for a job with our Company in any way or have made your CV and related information available for our Company's review.

We will process the personal data we obtain in the above cases only in accordance with this Notice.

WHICH OF YOUR PERSONAL DATA DO WE PROCESS?

Our personal data processing methods operate through our website, by telephone or e-mail, through electronic applications specific to our customers, through your participation in our business events and surveys, or through your interaction with us in any other way. In this context, the categories of personal data we process about you are as follows:

Identity information
Contact information
Images and/or videos that may identify you
Financial data
Any other information you decide to share with our Company of your own accord
Automatically collected electronic data
Legal transaction and compliance information
Corporate customer/Supplier data
Incident management and security information
Personal data collected from other sources

ON WHICH LEGAL GROUNDS DO WE PROCESS YOUR PERSONAL DATA?

Personal data is collected, used, recorded, stored and processed by our Company by providing data subjects with clear and comprehensible written information and, where necessary, obtaining their explicit consent, lawfully and in accordance with the rules of good faith, in a manner connected with and limited to the legitimate purpose clearly stated above, and within the framework of the principle of proportionality.

We process your personal data in line with the following legal grounds, which are set out in Article 5 of the KVKK and also appear under the heading "Purpose of Processing and Transferring Personal Data" of this policy, in particular the Turkish Commercial Code No. 6102, the Turkish Code of Obligations No. 6098, the Tax Procedure Law No. 213 and electronic commerce legislation:

The existence of the explicit consent of the data subject,
Being expressly provided for by law,
Being necessary for the protection of the life or physical integrity of the person himself or herself or of another person, where that person is unable to give consent due to actual impossibility or whose consent is not deemed legally valid,
Being necessary to process the personal data of the parties to a contract, provided that it is directly related to the conclusion or performance of that contract,
Being mandatory for the data controller to fulfil its legal obligation,
Having been made public by the data subject,
Being mandatory for the establishment, exercise or protection of a right,
Being mandatory for the legitimate interests of the data controller, provided that it does not harm the fundamental rights and freedoms of the data subject.

Where your Personal Data is processed on the basis of explicit consent, we would like to point out that if you withdraw your explicit consent, you will be removed from the commercial membership programme for which the processing based on that explicit consent is necessary, and that as of the relevant date you will no longer be able to benefit from the advantages you enjoyed through such processing.

RETENTION AND DESTRUCTION PERIODS FOR PERSONAL DATA

Your personal data will be stored for the retention periods specified in the relevant legislation or for as long as the processing purposes mentioned above require. At the end of this period, the data will be deleted, destroyed or anonymised in full compliance with the KVKK. In this context, a Personal Data Retention and Destruction Policy and the related procedures have been prepared and are applied.

HOW DO WE PROTECT YOUR PERSONAL DATA?

In order to protect your personal data and to prevent unlawful access to it, our Company takes the necessary administrative and technical measures in line with the Personal Data Security Guide published by the Personal Data Protection Authority, draws up internal procedures, prepares disclosure and explicit consent texts and, pursuant to Article 12/3 of the KVKK, carries out, or has carried out through external services, the audits necessary to ensure the implementation of the provisions of the KVKK.

WHAT ARE YOUR RIGHTS REGARDING YOUR PERSONAL DATA?

Pursuant to Article 11 of the KVKK, everyone has the following rights concerning themselves by applying to the data controller:

To learn whether personal data is processed,
To request information if personal data has been processed,
To learn the purpose of processing personal data and whether it is used in accordance with that purpose,
To know the third parties to whom personal data is transferred in Turkey or abroad,
To request the correction of personal data if it has been processed incompletely or incorrectly,
To request the deletion or destruction of personal data within the framework of the conditions set out in Article 7 of the KVKK,
To request that the operations carried out pursuant to subparagraphs (d) and (e) be notified to the third parties to whom the personal data has been transferred,
To object to a result arising against the person themselves through the analysis of the processed data exclusively by automated systems,
To request compensation for the damage suffered in the event of damage due to the unlawful processing of personal data.

TO MAKE A REQUEST UNDER THE PERSONAL DATA PROTECTION LAW

To obtain more detailed information about your Personal Data, you can access the information request application form from our company's website at https://www.foxbau.com/ and from the address Organize Sanayi Bölgesi 1. Kısım 7. Cadde No:6 Döşemealtı – Antalya / TÜRKİYE in person.

So that we can respond to your requests regarding your Personal Data as quickly as possible, your requests and questions must be submitted clearly, comprehensibly and with a specific date.

FOX CERAFLEX® FX114

Product Description

Advantages

Usage Areas

Application Areas

Application Steps

Surface Preparation – Cement-Based Surfaces

Surface Preparation – Other Surfaces (Aerated Concrete, Gypsum, Chipboard, etc.)

Surface Preparation – Wood-Based Panel Surfaces (OSB and Chipboards)

Mixing

Application

Workability Test

Grouting

Tool Cleaning

Related Products