No image

Colour Palette

Transparent

Packaging

10 kg

TDS

Product Description

EPOTHANE® BASECOAT GRANIKOL BINDER is an epoxy resin-based, two-component, high chemical resistance, solvent-free, UV-resistant, self-levelling, transparent binder. Specially developed for Granikol floor coating systems, this product is applied by mixing with FOX GRANIKOL FILLER. At the recommended application thickness of 1.0–2.0 mm, it forms a glossy, hygienic and liquid-impermeable floor coating surface. With a density of 1.15±0.05 gr/cm³, the product contains 100% solids and no thinner is used. At +23°C it offers approximately 45 minutes of pot life. After 7 days of curing, it achieves a compressive strength of ≥60 N/mm², flexural tensile strength of ≥30 N/mm² and adhesion to concrete of ≥1.5 N/mm². It can be safely used in exhibition and fair areas, hospitals, schools, hotels, shopping centres and many areas requiring hygiene.

Advantages

High chemical and mechanical resistance.
Easy to maintain and clean.
Flowable.
Provides hygienic environments.
Liquid-impermeable.
Glossy topcoat finish is achieved.
High adhesion strength.

Property	Value
Density	1,15±0,05 gr/cm³
Colour	Transparent
Compressive Strength (7 days)	≥ 60 N/mm²
Flexural Tensile Strength (7 days)	≥ 30 N/mm²
Adhesion Strength (to Concrete)	≥ 1,5 N/mm²
Total Solids Content	% 100
Thinning	Not thinned
Application Surface Temperature	+10°C / +30°C
Shore D Hardness (7 days)	84
Pot Life	~45 min (+23°C, 50% relative humidity)
Recommended Thickness	1.0 mm - 2.0 mm
Recoat Time (+10°C)	Min. 26 - Max. 32 hours
Recoat Time (+20°C)	Min. 18 - Max. 24 hours
Recoat Time (+30°C)	Min. 12 - Max. 16 hours
Foot Traffic (+10°C / +20°C / +30°C)	30 hours / 26 hours / 18 hours
Light Traffic (+10°C / +20°C / +30°C)	4 days / 3 days / 2 days
Full Cure (+10°C)	10 days
Full Cure (+20°C / +30°C)	7 days
Shelf Life	12 months (+5°C to +30°C, in original packaging)

Usage Areas

Exhibition and Fair Areas
Areas where decorative flooring is desired
Areas requiring chemical and mechanical resistance
Airports
Galleries
Shopping centres
Supermarkets
Shops and Showrooms
Hotels
Hospitals and nursing homes
Clinics
Schools and Nurseries
Used with FOX GRANIKOL FILLER in areas where hygiene is required

Application Steps

1
Surface Preparation
Concrete substrates must be prepared using abrasive equipment such as shot blasting, milling or diamond grinding to remove the cement laitance and achieve an open-pored surface. Weak concrete particles must be removed from the surface, and small voids and holes must be fully opened. The resulting dust must be cleaned with an industrial vacuum. For substrate repairs and levelling, a mortar obtained by mixing EPOTHANE® PRIMER series primer with 60–70 AFS (0.1–0.3 mm) quartz sand should be used.
2
Checking Application Conditions
Surface moisture content must be below 4% (must be tested by CM measurement or oven-drying method). There must be no rising moisture according to ASTM. Relative air humidity must be a maximum of 80%, and the floor temperature must be at least +3°C above the dew point. Surface, ambient and material temperature must be a minimum of +10°C and a maximum of +30°C.
3
Priming
Surfaces to which EPOTHANE® BASECOAT GRANIKOL BINDER will be applied must be pre-primed with an EPOTHANE® series primer suitable for the floor condition (refer to the primer selection table for primer choice). The floor temperature must be a minimum of +10°C; application over the primer must be carried out within the specified recoat time.
4
Mixing
After fully adding component B into component A, mix for at least 3 minutes at 300–400 rpm using an electric mixer and an epoxy/polyurethane resin mixing paddle until a homogeneous mixture is obtained. Avoid over-mixing to minimise air entrainment.
5
Coating Application
EPOTHANE® BASECOAT GRANIKOL BINDER is mixed with FOX GRANIKOL FILLER, poured onto the surface and applied evenly with a notched trowel. When the coating reaches the appropriate consistency, air must be released using a spike roller. If the spike roller application is delayed, spike roller marks may remain on the surface.
6
Tool and Equipment Cleaning
Tools and equipment used must be cleaned with solvent or epoxy thinner after application. Once the product has cured, it can only be removed from the surface by mechanical means.

Critical

Surface and ambient temperature must be a minimum of +10°C and a maximum of +30°C. Application must not be carried out outside this range.

Critical

After the application is completed, the coating must be protected from direct water contact for at least 24 hours. If water contact occurs, softening and blistering will form on the coating, causing it to lose its properties; in this case the coating must be completely removed and reapplied.

Critical

The floor temperature must be at least +3°C above the dew point. Attention must be paid to dew formation and condensation.

Critical

Concrete substrates must be at least 3 weeks old prior to application. The surface moisture content must be a maximum of 4%.

Critical

After component B has been fully added to component A, mixing must be carried out for at least 3 minutes with an electric mixer at 300–400 rpm until a homogeneous mixture is obtained. If the specified mixing paddle is not used, air will be entrained into the product and air bubbles will form on the coating.

Important

Materials to be used should be brought to the application site 1–2 days in advance and allowed to acclimatise to ambient conditions.

Important

In cold weather, product containers should be kept at +20°C–+25°C before use to bring them to application-ready condition.

Important

Rain, dust, wind, animals and insects must be prevented from entering the building while the coating is still fresh.

Important

The product must be stored between +5°C and +30°C, away from direct sunlight, in a cool and dry environment, protected from frost. Shelf life is 12 months from the date of manufacture.

Critical

Approaching storage and application areas with open flame is dangerous; these areas must be ventilated. Appropriate work clothing, protective gloves, goggles and a mask must be worn during application. In case of contact with skin or eyes, wash thoroughly with plenty of water and soap; if swallowed, consult a doctor immediately.

Information

Consumption figures are given for ideal conditions where ambient and surface temperature is assumed to be +20°C. It should be noted that consumption will increase on uneven surfaces and in cold weather conditions.

Information

The product does not contain volatile organic compounds (VOC-solvent).

Related Products

OUR PRINCIPLES FOR PROCESSING PERSONAL DATA

All personal data processed by our Company is processed only in accordance with the procedures and principles laid down in the Law and in other laws. Pursuant to Article 4 of the KVKK, the basic principles we observe when processing your personal data are as follows:

Being processed lawfully and in accordance with the rules of good faith.
Being accurate and, where necessary, up to date.
Being processed for specific, explicit and legitimate purposes.
Being relevant, limited and proportionate to the purposes for which they are processed.
Being retained for the period stipulated in the relevant legislation or required for the purpose for which they are processed.

CATEGORIES OF DATA SUBJECTS

A separate policy applies to the processing of the personal data of our employees (including interns and subcontractor employees) whose personal data are processed by our Company. Data subjects other than employees, such as customers, potential customers, visitors, job candidates/interns and the employees, shareholders and officers of the institutions we cooperate with, may also address their requests to our Company under the KVKK.

PURPOSE OF PROCESSING AND TRANSFERRING PERSONAL DATA

Our Company processes personal data only for the purposes and under the conditions set out in the personal data processing conditions specified in Article 5, paragraph 2 and Article 6, paragraph 3 of Law No. 6698 on the Protection of Personal Data. Personal data may be processed where at least one of the items listed below is present:

The existence of the explicit consent of the data subject,
Being expressly provided for by law,
Being necessary for the protection of the life or physical integrity of the person himself or herself or of another person, where that person is unable to give consent due to actual impossibility or whose consent is not deemed legally valid,
Being necessary to process the personal data of the parties to a contract, provided that it is directly related to the conclusion or performance of that contract,
Being mandatory for the data controller to fulfil its legal obligation,
Having been made public by the data subject,
Being mandatory for the establishment, exercise or protection of a right,
Being mandatory for the legitimate interests of the data controller, provided that it does not harm the fundamental rights and freedoms of the data subject.

Under the conditions stated above, our Company may process personal data for the following purposes:

Evaluating potential suppliers/business partners,
Establishing and managing customer relations,
Conducting and concluding the contract process with our suppliers/business partners,
Conducting direct marketing processes,
Communication and support (upon your request),
Compliance with legal obligations,
Protecting the interests of the Company and ensuring its security,
Planning and carrying out the Company's commercial activities,
Reporting and auditing,
Protection of rights and interests.

We share your Personal Data with other parties, including professional advisers such as those listed below:

We share your personal data and your special categories of personal data, within the framework of legal grounds and your consent and within the scope of the personal data processing purposes stated above, with public institutions and organisations, banks, insurance companies, auditors, lawyers, accountants, other external professional advisers, the Joint Health and Safety Unit for the purpose of fulfilling occupational health and safety obligations, law enforcement authorities in line with our legal obligations, domestic and foreign service providers from which we receive services within the scope of marketing activities where consent has been given, and our contracted workplace physician.

WHEN DO WE COLLECT PERSONAL DATA ABOUT YOU?

We collect your personal data in the following cases:

When you visit our Company, or purchase or use our products and services,
If you are a natural or legal person purchasing goods and services from our Company,
When you sell us goods or provide us with services,
When you choose to receive our marketing communications,
When you contact us through our website, e-mail, social media platforms, other online channels or by telephone,
When you take part in our company events, social responsibility projects and organisations,
When you contact us for any purpose as a potential customer, supplier, business partner or subcontractor,
If you have applied for a job with our Company in any way or have made your CV and related information available for our Company's review.

We will process the personal data we obtain in the above cases only in accordance with this Notice.

WHICH OF YOUR PERSONAL DATA DO WE PROCESS?

Our personal data processing methods operate through our website, by telephone or e-mail, through electronic applications specific to our customers, through your participation in our business events and surveys, or through your interaction with us in any other way. In this context, the categories of personal data we process about you are as follows:

Identity information
Contact information
Images and/or videos that may identify you
Financial data
Any other information you decide to share with our Company of your own accord
Automatically collected electronic data
Legal transaction and compliance information
Corporate customer/Supplier data
Incident management and security information
Personal data collected from other sources

ON WHICH LEGAL GROUNDS DO WE PROCESS YOUR PERSONAL DATA?

Personal data is collected, used, recorded, stored and processed by our Company by providing data subjects with clear and comprehensible written information and, where necessary, obtaining their explicit consent, lawfully and in accordance with the rules of good faith, in a manner connected with and limited to the legitimate purpose clearly stated above, and within the framework of the principle of proportionality.

We process your personal data in line with the following legal grounds, which are set out in Article 5 of the KVKK and also appear under the heading "Purpose of Processing and Transferring Personal Data" of this policy, in particular the Turkish Commercial Code No. 6102, the Turkish Code of Obligations No. 6098, the Tax Procedure Law No. 213 and electronic commerce legislation:

The existence of the explicit consent of the data subject,
Being expressly provided for by law,
Being necessary for the protection of the life or physical integrity of the person himself or herself or of another person, where that person is unable to give consent due to actual impossibility or whose consent is not deemed legally valid,
Being necessary to process the personal data of the parties to a contract, provided that it is directly related to the conclusion or performance of that contract,
Being mandatory for the data controller to fulfil its legal obligation,
Having been made public by the data subject,
Being mandatory for the establishment, exercise or protection of a right,
Being mandatory for the legitimate interests of the data controller, provided that it does not harm the fundamental rights and freedoms of the data subject.

Where your Personal Data is processed on the basis of explicit consent, we would like to point out that if you withdraw your explicit consent, you will be removed from the commercial membership programme for which the processing based on that explicit consent is necessary, and that as of the relevant date you will no longer be able to benefit from the advantages you enjoyed through such processing.

RETENTION AND DESTRUCTION PERIODS FOR PERSONAL DATA

Your personal data will be stored for the retention periods specified in the relevant legislation or for as long as the processing purposes mentioned above require. At the end of this period, the data will be deleted, destroyed or anonymised in full compliance with the KVKK. In this context, a Personal Data Retention and Destruction Policy and the related procedures have been prepared and are applied.

HOW DO WE PROTECT YOUR PERSONAL DATA?

In order to protect your personal data and to prevent unlawful access to it, our Company takes the necessary administrative and technical measures in line with the Personal Data Security Guide published by the Personal Data Protection Authority, draws up internal procedures, prepares disclosure and explicit consent texts and, pursuant to Article 12/3 of the KVKK, carries out, or has carried out through external services, the audits necessary to ensure the implementation of the provisions of the KVKK.

WHAT ARE YOUR RIGHTS REGARDING YOUR PERSONAL DATA?

Pursuant to Article 11 of the KVKK, everyone has the following rights concerning themselves by applying to the data controller:

To learn whether personal data is processed,
To request information if personal data has been processed,
To learn the purpose of processing personal data and whether it is used in accordance with that purpose,
To know the third parties to whom personal data is transferred in Turkey or abroad,
To request the correction of personal data if it has been processed incompletely or incorrectly,
To request the deletion or destruction of personal data within the framework of the conditions set out in Article 7 of the KVKK,
To request that the operations carried out pursuant to subparagraphs (d) and (e) be notified to the third parties to whom the personal data has been transferred,
To object to a result arising against the person themselves through the analysis of the processed data exclusively by automated systems,
To request compensation for the damage suffered in the event of damage due to the unlawful processing of personal data.

TO MAKE A REQUEST UNDER THE PERSONAL DATA PROTECTION LAW

To obtain more detailed information about your Personal Data, you can access the information request application form from our company's website at https://www.foxbau.com/ and from the address Organize Sanayi Bölgesi 1. Kısım 7. Cadde No:6 Döşemealtı – Antalya / TÜRKİYE in person.

So that we can respond to your requests regarding your Personal Data as quickly as possible, your requests and questions must be submitted clearly, comprehensibly and with a specific date.

EPOTHANE® BASECOAT GRANIKOL BINDER

Product Description

Advantages

Usage Areas

Application Steps

Surface Preparation

Checking Application Conditions

Priming

Mixing

Coating Application

Tool and Equipment Cleaning

Related Products