FOX BETON & BODENFARBE FF920 is a single-component, water-based acrylic, high abrasion resistance, tyre-mark resistant, multipurpose, ready-to-use concrete and floor paint. With its UV resistance and fast-drying properties, it delivers superior performance on concrete and screed surfaces.

Colour Palette

Packaging

5 kg

20 kg

TDS

Product Description

FOX BETON & BODENFARBE FF920 is a single-component, water-based acrylic concrete and floor paint. Its ready-to-use formulation requires no complex preparation; simply mix thoroughly with an electric mixer before application. Its high resistance to abrasion and hot tyre marks provides reliable protection in garages, car parks, and heavily trafficked floor areas. Thanks to its UV-resistant composition, it can be used outdoors for extended periods without loss of colour or performance. Suitable for use on concrete and screed surfaces, cellars, storage areas, and both indoor and outdoor applications. Prior to application, priming with FOX EPOTHANE® PRIMER WB COLORED or FOX UNIPRIMER FL555 is recommended depending on surface characteristics.

Advantages

UV resistant.
Provides excellent adhesion.
High abrasion resistance.
High resistance to hot tyre marks.
Fast drying.

Property	Value
Colour	RAL7001 / RAL7016 / RAL7035 / RAL9010 and RAL colours
Appearance	Matt
Density	1,20±0,05 gr/cm³
Viscosity (25°C)	~1200 mPa.s
Recoat Time	Min. 2 hours – Max. 48 hours
Drying Time	~60 min
Open to Foot Traffic	1 day
Full Cure	7 days
Thinning	Not thinnable
Application Temperature (Surface / Ambient / Material)	Min. +5°C – Max. +30°C
Shelf Life	12 months (in original unopened packaging, between +5°C and +30°C)

Usage Areas

Concrete and screed surfaces
Garage floors
Cellars, storage areas
Suitable for indoor and outdoor use

Application Steps

1
Surface Preparation
The surface should be cleaned using pressurised water where possible and completely freed from oil, grease, fuel, paraffin residues, release agents, cement residues, loose particles, dirt, and all foreign matter that could adversely affect adhesion. FOX MORTAR FC188 T, FOX FASTMORTAR FC245, or FOX FASTMORTAR FC233 may be used to fill voids and carry out repairs on the surface. Concrete surfaces must be at least 3 weeks old prior to application.
2
Priming
Before applying FOX BETON & BODENFARBE FF920, the surface must be primed with FOX EPOTHANE® PRIMER WB COLORED or FOX UNIPRIMER FL555, depending on the characteristics of the existing surface and application conditions. FOX EPOTHANE® PRIMER WB COLORED may be preferred on concrete surfaces where consolidation and improved adhesion are required, while FOX UNIPRIMER FL555 may be used on other suitable surfaces. After primer application is complete, a waiting period of at least 16 hours and no more than 48 hours must be observed before proceeding with FOX BETON & BODENFARBE FF920 application.
3
Mixing
FOX BETON & BODENFARBE FF920 is single-component and therefore ready to use. Due to its pigment and filler content, it must be thoroughly mixed with an electric mixer at 300–400 rpm before use. The product must not be thinned.
4
Coating Application
The product should be applied to the surface using a roller. Care should be taken to ensure that successive coats are applied wet-on-wet to minimise roller marks. Application should be carried out along the short edge, with each new pass starting immediately adjacent to the previous one. A second roller pass over the material should be made to ensure homogeneous distribution. Recoating should be carried out a minimum of 2 hours after the previous coat, depending on ambient temperature. A minimum of 2 coats is recommended for optimum performance; the number of coats may be increased depending on surface porosity.
5
Application over Existing Coatings
Ensure that the existing coating is sound and has adequate adhesion to the surface. The surface must be sanded with 120-grit sandpaper and completely freed from dust. It should then be primed with FOX EPOTHANE® PRIMER WB COLORED or FOX UNIPRIMER FL555 depending on the type of existing coating and surface characteristics, and FOX BETON & BODENFARBE FF920 application should commence 24 hours after primer application.
6
Tool and Equipment Cleaning
Tools and equipment used during application can be cleaned with water. Once the product has hardened, it can only be removed from the surface by mechanical means.

Critical

Surface temperature, ambient temperature, and material temperature must be a minimum of +5°C and a maximum of +30°C. Application must not be carried out outside this temperature range.

Critical

After application is complete, the coating must be protected from direct water contact for at least 24 hours. Contact with water will cause softening and blistering of the coating, resulting in loss of its properties. In such a case, the coating must be completely removed and reapplied.

Critical

Concrete surfaces must be at least 3 weeks old prior to application. A vapour barrier layer must be installed on slabs laid on ground.

Critical

The waiting time between primer application and FOX BETON & BODENFARBE FF920 application must be a minimum of 16 hours and a maximum of 48 hours. If these periods are exceeded, the primed surface must be sanded with 120-grit sandpaper and re-prepared.

Important

Materials to be used should be brought to the application site 1–2 days in advance and allowed to acclimatise to ambient conditions. In cold weather, packaging should be kept at +20°C – +25°C until ready for use.

Important

Rain, dust, wind, animals, and insects must be prevented from entering the building while the coating is still fresh.

Important

The product must be stored in its original unopened packaging in a dry and cool environment (between +5°C and +30°C), protected from sunlight and frost. Shelf life is 12 months from the date of manufacture. Opened packaging must be consumed within 1 week.

Important

Pallets must never be stacked on top of one another during storage. Shipment must follow a first-in, first-out system.

Important

During application, appropriate work clothing, protective gloves, goggles, and a mask must be worn in accordance with occupational health and safety regulations. Contact with skin and eyes must be avoided; in case of contact, wash thoroughly with plenty of water and soap. If swallowed, seek medical attention immediately.

Important

Open flames near storage and application areas are dangerous. Storage and application areas must be adequately ventilated.

Information

Consumption figures are given for ideal conditions assuming an ambient and surface temperature of 20°C. It should be noted that consumption will increase on uneven surfaces and in cold weather conditions.

Information

In acrylic-based systems, pot life and curing times are affected by ambient temperature, substrate temperature, and air humidity. Curing slows at lower temperatures and accelerates at higher temperatures.

Related Products

OUR PRINCIPLES FOR PROCESSING PERSONAL DATA

All personal data processed by our Company is processed only in accordance with the procedures and principles laid down in the Law and in other laws. Pursuant to Article 4 of the KVKK, the basic principles we observe when processing your personal data are as follows:

Being processed lawfully and in accordance with the rules of good faith.
Being accurate and, where necessary, up to date.
Being processed for specific, explicit and legitimate purposes.
Being relevant, limited and proportionate to the purposes for which they are processed.
Being retained for the period stipulated in the relevant legislation or required for the purpose for which they are processed.

CATEGORIES OF DATA SUBJECTS

A separate policy applies to the processing of the personal data of our employees (including interns and subcontractor employees) whose personal data are processed by our Company. Data subjects other than employees, such as customers, potential customers, visitors, job candidates/interns and the employees, shareholders and officers of the institutions we cooperate with, may also address their requests to our Company under the KVKK.

PURPOSE OF PROCESSING AND TRANSFERRING PERSONAL DATA

Our Company processes personal data only for the purposes and under the conditions set out in the personal data processing conditions specified in Article 5, paragraph 2 and Article 6, paragraph 3 of Law No. 6698 on the Protection of Personal Data. Personal data may be processed where at least one of the items listed below is present:

The existence of the explicit consent of the data subject,
Being expressly provided for by law,
Being necessary for the protection of the life or physical integrity of the person himself or herself or of another person, where that person is unable to give consent due to actual impossibility or whose consent is not deemed legally valid,
Being necessary to process the personal data of the parties to a contract, provided that it is directly related to the conclusion or performance of that contract,
Being mandatory for the data controller to fulfil its legal obligation,
Having been made public by the data subject,
Being mandatory for the establishment, exercise or protection of a right,
Being mandatory for the legitimate interests of the data controller, provided that it does not harm the fundamental rights and freedoms of the data subject.

Under the conditions stated above, our Company may process personal data for the following purposes:

Evaluating potential suppliers/business partners,
Establishing and managing customer relations,
Conducting and concluding the contract process with our suppliers/business partners,
Conducting direct marketing processes,
Communication and support (upon your request),
Compliance with legal obligations,
Protecting the interests of the Company and ensuring its security,
Planning and carrying out the Company's commercial activities,
Reporting and auditing,
Protection of rights and interests.

We share your Personal Data with other parties, including professional advisers such as those listed below:

We share your personal data and your special categories of personal data, within the framework of legal grounds and your consent and within the scope of the personal data processing purposes stated above, with public institutions and organisations, banks, insurance companies, auditors, lawyers, accountants, other external professional advisers, the Joint Health and Safety Unit for the purpose of fulfilling occupational health and safety obligations, law enforcement authorities in line with our legal obligations, domestic and foreign service providers from which we receive services within the scope of marketing activities where consent has been given, and our contracted workplace physician.

WHEN DO WE COLLECT PERSONAL DATA ABOUT YOU?

We collect your personal data in the following cases:

When you visit our Company, or purchase or use our products and services,
If you are a natural or legal person purchasing goods and services from our Company,
When you sell us goods or provide us with services,
When you choose to receive our marketing communications,
When you contact us through our website, e-mail, social media platforms, other online channels or by telephone,
When you take part in our company events, social responsibility projects and organisations,
When you contact us for any purpose as a potential customer, supplier, business partner or subcontractor,
If you have applied for a job with our Company in any way or have made your CV and related information available for our Company's review.

We will process the personal data we obtain in the above cases only in accordance with this Notice.

WHICH OF YOUR PERSONAL DATA DO WE PROCESS?

Our personal data processing methods operate through our website, by telephone or e-mail, through electronic applications specific to our customers, through your participation in our business events and surveys, or through your interaction with us in any other way. In this context, the categories of personal data we process about you are as follows:

Identity information
Contact information
Images and/or videos that may identify you
Financial data
Any other information you decide to share with our Company of your own accord
Automatically collected electronic data
Legal transaction and compliance information
Corporate customer/Supplier data
Incident management and security information
Personal data collected from other sources

ON WHICH LEGAL GROUNDS DO WE PROCESS YOUR PERSONAL DATA?

Personal data is collected, used, recorded, stored and processed by our Company by providing data subjects with clear and comprehensible written information and, where necessary, obtaining their explicit consent, lawfully and in accordance with the rules of good faith, in a manner connected with and limited to the legitimate purpose clearly stated above, and within the framework of the principle of proportionality.

We process your personal data in line with the following legal grounds, which are set out in Article 5 of the KVKK and also appear under the heading "Purpose of Processing and Transferring Personal Data" of this policy, in particular the Turkish Commercial Code No. 6102, the Turkish Code of Obligations No. 6098, the Tax Procedure Law No. 213 and electronic commerce legislation:

The existence of the explicit consent of the data subject,
Being expressly provided for by law,
Being necessary for the protection of the life or physical integrity of the person himself or herself or of another person, where that person is unable to give consent due to actual impossibility or whose consent is not deemed legally valid,
Being necessary to process the personal data of the parties to a contract, provided that it is directly related to the conclusion or performance of that contract,
Being mandatory for the data controller to fulfil its legal obligation,
Having been made public by the data subject,
Being mandatory for the establishment, exercise or protection of a right,
Being mandatory for the legitimate interests of the data controller, provided that it does not harm the fundamental rights and freedoms of the data subject.

Where your Personal Data is processed on the basis of explicit consent, we would like to point out that if you withdraw your explicit consent, you will be removed from the commercial membership programme for which the processing based on that explicit consent is necessary, and that as of the relevant date you will no longer be able to benefit from the advantages you enjoyed through such processing.

RETENTION AND DESTRUCTION PERIODS FOR PERSONAL DATA

Your personal data will be stored for the retention periods specified in the relevant legislation or for as long as the processing purposes mentioned above require. At the end of this period, the data will be deleted, destroyed or anonymised in full compliance with the KVKK. In this context, a Personal Data Retention and Destruction Policy and the related procedures have been prepared and are applied.

HOW DO WE PROTECT YOUR PERSONAL DATA?

In order to protect your personal data and to prevent unlawful access to it, our Company takes the necessary administrative and technical measures in line with the Personal Data Security Guide published by the Personal Data Protection Authority, draws up internal procedures, prepares disclosure and explicit consent texts and, pursuant to Article 12/3 of the KVKK, carries out, or has carried out through external services, the audits necessary to ensure the implementation of the provisions of the KVKK.

WHAT ARE YOUR RIGHTS REGARDING YOUR PERSONAL DATA?

Pursuant to Article 11 of the KVKK, everyone has the following rights concerning themselves by applying to the data controller:

To learn whether personal data is processed,
To request information if personal data has been processed,
To learn the purpose of processing personal data and whether it is used in accordance with that purpose,
To know the third parties to whom personal data is transferred in Turkey or abroad,
To request the correction of personal data if it has been processed incompletely or incorrectly,
To request the deletion or destruction of personal data within the framework of the conditions set out in Article 7 of the KVKK,
To request that the operations carried out pursuant to subparagraphs (d) and (e) be notified to the third parties to whom the personal data has been transferred,
To object to a result arising against the person themselves through the analysis of the processed data exclusively by automated systems,
To request compensation for the damage suffered in the event of damage due to the unlawful processing of personal data.

TO MAKE A REQUEST UNDER THE PERSONAL DATA PROTECTION LAW

To obtain more detailed information about your Personal Data, you can access the information request application form from our company's website at https://www.foxbau.com/ and from the address Organize Sanayi Bölgesi 1. Kısım 7. Cadde No:6 Döşemealtı – Antalya / TÜRKİYE in person.

So that we can respond to your requests regarding your Personal Data as quickly as possible, your requests and questions must be submitted clearly, comprehensibly and with a specific date.

FOX BETON & BODENFARBE FF920

Product Description

Advantages

Usage Areas

Application Steps

Surface Preparation

Priming

Mixing

Coating Application

Application over Existing Coatings

Tool and Equipment Cleaning

Related Products