FOX EPOTHANE® TOPCOAT EU is an epoxy resin-based, two-component, high chemical resistance, solvent-free and lightly textured floor coating material. It is reliably applied in areas exposed to medium and light traffic loads, in environments requiring hygiene, and on surfaces where chemical resistance is needed.

Colour Palette

In RAL Colours

Packaging

30 kg

TDS

Product Description

FOX EPOTHANE® TOPCOAT EU is an epoxy resin-based, two-component, solvent-free and lightly textured floor coating material. Thanks to its high chemical resistance formulation, it can be used in many different areas such as schools, nurseries, hospitals, laboratories, warehouses, production areas, car parks, shopping centres and similar environments. The product provides a glossy topcoat surface and offers high adhesion strength, abrasion resistance and easy maintenance. With a density of 1.40±0.05 g/cm³, the product must be applied at floor and ambient temperatures between +10°C and +30°C.

Advantages

Easy to apply.
Can be highly filled with aggregates.
Has high chemical resistance.
High abrasion resistance.
Easy to maintain and clean.
Flowable.
Provides hygienic environments.
Has a structure that does not allow microbial growth.
Liquid-impermeable.
Glossy topcoat finish is achieved.
High adhesion strength.

Property	Value
Density	1,40±0,05 gr/cm³
Colour	In RAL Colours
Compressive Strength (7 days)	≥65 N/mm²
Flexural Tensile Strength (7 days)	≥25 N/mm²
Adhesion Strength (to Concrete)	>2,0 N/mm²
Total Solid Content	%80
Application Floor Temperature	+10°C / +30°C
Thinning	Not thinned
Shore D Hardness (7 days)	≥75
Abrasion Resistance (Taber CS10/1kg/1000rev.)	60 mg
Pot Life	⁓30 minutes
Shelf Life	12 months (from date of manufacture, stored between +5°C and +30°C)

Usage Areas

In areas exposed to medium/light traffic loads
In areas requiring chemical resistance
In schools and nurseries
In the chemical and pharmaceutical industry
In laboratories
In warehouses
In production areas
In car parks
In garages
In airports
In galleries
In shopping centres
In supermarkets
In shops and showrooms
In hotels
In hospitals and care homes
In clinics
In areas where hygiene is required

Application Steps

1
Surface Preparation
Concrete substrates to be coated must be prepared using abrasive equipment (shot blasting, milling, diamond grinding, etc.) to remove the cement laitance and achieve an open-pored surface. Weak concrete particles must be removed from the surface, and small voids and holes must be fully opened. The resulting dust must be cleaned with an industrial vacuum. For substrate repairs, filling of voids and levelling of the surface, a mortar obtained by mixing 60–70 AFS (0.1–0.3 mm) quartz sand with FOX EPOTHANE® PRIMER series primer should be used to prepare the floor. The compressive strength of concrete substrates must be at least 25 N/mm², tensile strength at least 1.5 N/mm², moisture content a maximum of 4%, and floor temperature a minimum of +10°C.
2
Checking Application Conditions
Surface moisture content must be below 4% (should be tested by CM measurement or oven-drying method). There must be no rising damp according to ASTM (polyethylene sheet test). Relative air humidity must be a maximum of 80%. Floor temperature must be at least +3°C above the dew point. Surface, ambient and material temperature must be within the range of minimum +10°C and maximum +30°C.
3
Mixing
Before starting to mix, check that the product temperatures are between +10°C and +30°C. Mix component A thoroughly on its own using an electric mixer and a suitable mixing paddle (300–400 rpm) until a homogeneous colour is achieved and no product remains on the bottom or sides of the container. After adding component B entirely to component A, mix for at least 3 minutes until a homogeneous mixture is obtained. Avoid over-mixing to minimise air entrainment.
4
Priming
Surfaces to be coated with FOX EPOTHANE® TOPCOAT EU must have been previously primed with a FOX EPOTHANE® series primer. Floor temperature must be a minimum of +10°C. FOX EPOTHANE® TOPCOAT EU must be applied over the primer within the application window.
5
Coating Application
FOX EPOTHANE® TOPCOAT EU is poured onto the surface and applied evenly with a notched trowel. Immediately after the notched trowel application, it is back-rolled with a roller.
6
Tool Cleaning
After application, tools and equipment used must be cleaned with solvent or epoxy thinner. Once FOX EPOTHANE® TOPCOAT EU has cured, it can only be removed from the surface by mechanical means.

Critical

Application temperature must be a minimum of +10°C and a maximum of +30°C. Application must not be carried out outside this range.

Critical

After the application is completed, the coating must be protected from direct water contact for at least 24 hours. Contact with water will impair the properties of the coating, and the coating will have to be completely removed and reapplied.

Critical

The floor temperature must be at least +3°C above the dew point. Otherwise, condensation will damage the coating.

Critical

Concrete substrates must be at least 3 weeks old before application.

Critical

Relative air humidity must be a maximum of 80%.

Critical

Surface moisture content must be below 4%. There must be no rising damp according to ASTM (polyethylene sheet test).

Critical

Mixing must be carried out with an electric mixer at 300–400 rpm and the specified epoxy/polyurethane resin mixing paddle. Otherwise, air will be entrained into the product, causing air bubbles on the coating after application.

Important

Once FOX EPOTHANE® TOPCOAT EU has cured, it can only be removed from the surface by mechanical means.

Important

Materials to be used should be brought to the application site 1–2 days in advance and allowed to acclimatise to ambient conditions.

Important

In cold weather, ambient and floor temperatures should be raised; products should be kept at +20°C – +25°C to bring them to a ready-to-use state.

Important

Rain, dust, wind, animals and insects must be prevented from entering the building while the coating is still fresh.

Important

The product must be stored in its original unopened packaging, between +5°C and +30°C, away from direct sunlight, in a cool and dry environment, protected from frost. Shelf life is 12 months from the date of manufacture.

Important

For short-term storage, pallets may be stacked no more than 3 high; for long-term storage, pallets must not be stacked on top of each other.

Critical

It is dangerous to approach storage and application areas with open flames; these areas must be ventilated.

Critical

Work clothing, protective gloves, goggles and a mask must be worn during application. Contact with skin and eyes must be avoided; in case of contact, wash thoroughly with plenty of water and soap. In case of ingestion, seek medical attention immediately.

Important

Must be stored out of reach of children. Food and beverages must not be brought into application areas.

Information

Consumption figures are given for ideal conditions assuming an ambient and surface temperature of 20°C. Consumption will increase on uneven surfaces and in cold weather conditions.

Information

In resin-based systems, pot life and curing times are affected by ambient temperature, floor temperature and air humidity. Curing slows at low temperatures and accelerates at high temperatures.

Related Products

OUR PRINCIPLES FOR PROCESSING PERSONAL DATA

All personal data processed by our Company is processed only in accordance with the procedures and principles laid down in the Law and in other laws. Pursuant to Article 4 of the KVKK, the basic principles we observe when processing your personal data are as follows:

Being processed lawfully and in accordance with the rules of good faith.
Being accurate and, where necessary, up to date.
Being processed for specific, explicit and legitimate purposes.
Being relevant, limited and proportionate to the purposes for which they are processed.
Being retained for the period stipulated in the relevant legislation or required for the purpose for which they are processed.

CATEGORIES OF DATA SUBJECTS

A separate policy applies to the processing of the personal data of our employees (including interns and subcontractor employees) whose personal data are processed by our Company. Data subjects other than employees, such as customers, potential customers, visitors, job candidates/interns and the employees, shareholders and officers of the institutions we cooperate with, may also address their requests to our Company under the KVKK.

PURPOSE OF PROCESSING AND TRANSFERRING PERSONAL DATA

Our Company processes personal data only for the purposes and under the conditions set out in the personal data processing conditions specified in Article 5, paragraph 2 and Article 6, paragraph 3 of Law No. 6698 on the Protection of Personal Data. Personal data may be processed where at least one of the items listed below is present:

The existence of the explicit consent of the data subject,
Being expressly provided for by law,
Being necessary for the protection of the life or physical integrity of the person himself or herself or of another person, where that person is unable to give consent due to actual impossibility or whose consent is not deemed legally valid,
Being necessary to process the personal data of the parties to a contract, provided that it is directly related to the conclusion or performance of that contract,
Being mandatory for the data controller to fulfil its legal obligation,
Having been made public by the data subject,
Being mandatory for the establishment, exercise or protection of a right,
Being mandatory for the legitimate interests of the data controller, provided that it does not harm the fundamental rights and freedoms of the data subject.

Under the conditions stated above, our Company may process personal data for the following purposes:

Evaluating potential suppliers/business partners,
Establishing and managing customer relations,
Conducting and concluding the contract process with our suppliers/business partners,
Conducting direct marketing processes,
Communication and support (upon your request),
Compliance with legal obligations,
Protecting the interests of the Company and ensuring its security,
Planning and carrying out the Company's commercial activities,
Reporting and auditing,
Protection of rights and interests.

We share your Personal Data with other parties, including professional advisers such as those listed below:

We share your personal data and your special categories of personal data, within the framework of legal grounds and your consent and within the scope of the personal data processing purposes stated above, with public institutions and organisations, banks, insurance companies, auditors, lawyers, accountants, other external professional advisers, the Joint Health and Safety Unit for the purpose of fulfilling occupational health and safety obligations, law enforcement authorities in line with our legal obligations, domestic and foreign service providers from which we receive services within the scope of marketing activities where consent has been given, and our contracted workplace physician.

WHEN DO WE COLLECT PERSONAL DATA ABOUT YOU?

We collect your personal data in the following cases:

When you visit our Company, or purchase or use our products and services,
If you are a natural or legal person purchasing goods and services from our Company,
When you sell us goods or provide us with services,
When you choose to receive our marketing communications,
When you contact us through our website, e-mail, social media platforms, other online channels or by telephone,
When you take part in our company events, social responsibility projects and organisations,
When you contact us for any purpose as a potential customer, supplier, business partner or subcontractor,
If you have applied for a job with our Company in any way or have made your CV and related information available for our Company's review.

We will process the personal data we obtain in the above cases only in accordance with this Notice.

WHICH OF YOUR PERSONAL DATA DO WE PROCESS?

Our personal data processing methods operate through our website, by telephone or e-mail, through electronic applications specific to our customers, through your participation in our business events and surveys, or through your interaction with us in any other way. In this context, the categories of personal data we process about you are as follows:

Identity information
Contact information
Images and/or videos that may identify you
Financial data
Any other information you decide to share with our Company of your own accord
Automatically collected electronic data
Legal transaction and compliance information
Corporate customer/Supplier data
Incident management and security information
Personal data collected from other sources

ON WHICH LEGAL GROUNDS DO WE PROCESS YOUR PERSONAL DATA?

Personal data is collected, used, recorded, stored and processed by our Company by providing data subjects with clear and comprehensible written information and, where necessary, obtaining their explicit consent, lawfully and in accordance with the rules of good faith, in a manner connected with and limited to the legitimate purpose clearly stated above, and within the framework of the principle of proportionality.

We process your personal data in line with the following legal grounds, which are set out in Article 5 of the KVKK and also appear under the heading "Purpose of Processing and Transferring Personal Data" of this policy, in particular the Turkish Commercial Code No. 6102, the Turkish Code of Obligations No. 6098, the Tax Procedure Law No. 213 and electronic commerce legislation:

The existence of the explicit consent of the data subject,
Being expressly provided for by law,
Being necessary for the protection of the life or physical integrity of the person himself or herself or of another person, where that person is unable to give consent due to actual impossibility or whose consent is not deemed legally valid,
Being necessary to process the personal data of the parties to a contract, provided that it is directly related to the conclusion or performance of that contract,
Being mandatory for the data controller to fulfil its legal obligation,
Having been made public by the data subject,
Being mandatory for the establishment, exercise or protection of a right,
Being mandatory for the legitimate interests of the data controller, provided that it does not harm the fundamental rights and freedoms of the data subject.

Where your Personal Data is processed on the basis of explicit consent, we would like to point out that if you withdraw your explicit consent, you will be removed from the commercial membership programme for which the processing based on that explicit consent is necessary, and that as of the relevant date you will no longer be able to benefit from the advantages you enjoyed through such processing.

RETENTION AND DESTRUCTION PERIODS FOR PERSONAL DATA

Your personal data will be stored for the retention periods specified in the relevant legislation or for as long as the processing purposes mentioned above require. At the end of this period, the data will be deleted, destroyed or anonymised in full compliance with the KVKK. In this context, a Personal Data Retention and Destruction Policy and the related procedures have been prepared and are applied.

HOW DO WE PROTECT YOUR PERSONAL DATA?

In order to protect your personal data and to prevent unlawful access to it, our Company takes the necessary administrative and technical measures in line with the Personal Data Security Guide published by the Personal Data Protection Authority, draws up internal procedures, prepares disclosure and explicit consent texts and, pursuant to Article 12/3 of the KVKK, carries out, or has carried out through external services, the audits necessary to ensure the implementation of the provisions of the KVKK.

WHAT ARE YOUR RIGHTS REGARDING YOUR PERSONAL DATA?

Pursuant to Article 11 of the KVKK, everyone has the following rights concerning themselves by applying to the data controller:

To learn whether personal data is processed,
To request information if personal data has been processed,
To learn the purpose of processing personal data and whether it is used in accordance with that purpose,
To know the third parties to whom personal data is transferred in Turkey or abroad,
To request the correction of personal data if it has been processed incompletely or incorrectly,
To request the deletion or destruction of personal data within the framework of the conditions set out in Article 7 of the KVKK,
To request that the operations carried out pursuant to subparagraphs (d) and (e) be notified to the third parties to whom the personal data has been transferred,
To object to a result arising against the person themselves through the analysis of the processed data exclusively by automated systems,
To request compensation for the damage suffered in the event of damage due to the unlawful processing of personal data.

TO MAKE A REQUEST UNDER THE PERSONAL DATA PROTECTION LAW

To obtain more detailed information about your Personal Data, you can access the information request application form from our company's website at https://www.foxbau.com/ and from the address Organize Sanayi Bölgesi 1. Kısım 7. Cadde No:6 Döşemealtı – Antalya / TÜRKİYE in person.

So that we can respond to your requests regarding your Personal Data as quickly as possible, your requests and questions must be submitted clearly, comprehensibly and with a specific date.

FOX EPOTHANE® TOPCOAT EU

Product Description

Advantages

Usage Areas

Application Steps

Surface Preparation

Checking Application Conditions

Mixing

Priming

Coating Application

Tool Cleaning

Related Products