FOX PROCRETE® PRIMER is a solvent-free, three-component industrial floor primer obtained by modifying polyurethane-based resins with special additives and chemicals. With its high adhesion strength and liquid impermeability, it provides a reliable substrate for the FOX PROCRETE® series industrial floor coatings.

Colour Palette

Packaging

10 kg

TDS

Product Description

FOX PROCRETE® PRIMER is a solvent-free, three-component primer set specially designed for industrial floors, obtained by modifying polyurethane-based resins with special additives and chemicals. With a density of 1.20 g/cm³, this product in an off-white colour adheres excellently to concrete substrates, with a pull-off strength exceeding 3.60 N/mm² (concrete failure). FOX PROCRETE® PRIMER can be applied easily by roller, trowel or zero-notch squeegee, and can be applied to 7-day-old new concrete or to old concrete with high moisture content without the need for a special primer. At +23°C and 50% relative humidity, the pot life is 30 minutes, and a minimum of 24 hours and a maximum of 72 hours must be allowed before applying a subsequent coating.

Advantages

Environmentally friendly.
Contains no volatile solvents.
Safe to use.
High flash point and non-flammable.
No special precautions required for transport and storage.
Easy to apply — can be applied easily by roller or brush.
Low viscosity.
High adhesion strength.
Liquid-impermeable.

Property	Value
Density	1,20 g/cm³
Colour	Off-white
Pull-off Strength	Concrete failure > 3,60 N/mm²
Substrate Temperature	+8°C / +30°C
Pot Life	30 minutes
Overcoating Time	Min. 24 – Max. 72 hours
Final Cure Time	24 hours
Light Traffic	24 hours
Surface Temperature (Application)	Min. +8°C – Max. +30°C
Ambient Temperature (Application)	Min. +10°C – Max. +30°C
Material Temperature (Application)	Min. +15°C – Max. +25°C
Shelf Life	6 months (from date of manufacture)

Usage Areas

Used as a primer prior to the high-performance FOX PROCRETE® series industrial floor coatings.

Application Steps

1
Surface Quality Inspection
The concrete substrates to be coated must be sound and have sufficient compressive strength (minimum 25 N/mm²), a tensile strength of at least 1.5 N/mm², and a floor temperature of at least +8°C. Ensure that the substrate temperature is at least +3°C above the dew point. The substrate must be clean, dry and free from foreign matter (dirt, oil, grease, coatings, curing compounds, etc.).
2
Surface Preparation
Concrete substrates must be prepared using abrasive equipment such as shot blasting, milling or diamond grinding to remove laitance and achieve an open-pore surface. Weak concrete sections must be removed, and small voids and holes must be fully opened up. The resulting dust must be removed with an industrial vacuum. For substrate repairs and filling of voids, a mortar made from 60–70 AFS (0.1–0.3 mm) quartz sand mixed with FOX PROCRETE® PRIMER should be used.
3
Material Conditioning
Materials to be used on the application area should be brought to the site and stored 1–2 days in advance to allow them to acclimatise to ambient conditions. Before mixing, ensure that the product temperatures are between +15°C and +25°C.
4
Mixing
Since FOX PROCRETE® PRIMER is a three-component product, achieving a homogeneous mix is essential. The use of a COLLOMIX CX 22 or similar mixer is recommended. Component A is placed in a polyethylene mixing bucket. Component B is added entirely to Component A and mixed for 1 minute until a homogeneous mixture is obtained. Component C is then added entirely to the A+B mixture and mixed for 3 minutes until a homogeneous mixture is obtained. Avoid over-mixing to minimise air entrainment. After mixing, the material should be allowed to rest and then mixed again.
5
Application
Apply FOX PROCRETE® PRIMER by roller, trowel or zero-notch squeegee. A mix consumption of 150–200 g/m² should be used. Ensure that the application covers the entire surface without voids.
6
Tool Cleaning
After application, tools and equipment used should be cleaned with solvent. Xylene is recommended for cleaning.
7
Curing and Waiting Period
After applying FOX PROCRETE® PRIMER, a minimum of 24 hours and a maximum of 72 hours must be allowed before applying any subsequent coating. If more than 72 hours have elapsed, re-priming is required.

Critical

Application must not be carried out if the ambient or surface temperature is below +8°C or above +30°C; appropriate temperatures must be awaited.

Critical

Application must not be carried out in extremely hot, rainy or windy weather.

Critical

After applying FOX PROCRETE® PRIMER, a minimum of 24 hours and a maximum of 72 hours must be allowed before applying any subsequent coating. If more than 72 hours have elapsed, re-priming is required.

Critical

FOX PROCRETE® PRIMER Component A freezes below 0°C; particular attention must therefore be paid to storage conditions.

Critical

Beware of dew point and condensation. Dew formation and water vapour condensation on uncoated or freshly coated surfaces will damage the coating. To prevent this, the floor temperature must be above +8°C.

Important

Before mixing, ensure that the product temperatures are between +15°C and +25°C. The use of a COLLOMIX CX 22 or similar mixer is strongly recommended to achieve a homogeneous mix. Avoid over-mixing to minimise air entrainment.

Important

After mixing, the material should be allowed to rest and then mixed again.

Important

Materials to be used on the application area should be brought to the site and stored 1–2 days in advance to allow them to acclimatise to ambient conditions.

Important

In extremely cold weather, heaters should be used to raise the ambient and floor temperature; materials to be used should be conditioned at +20°C to +25°C and made ready for application.

Important

Opened packages must be resealed and consumed within 1 week.

Important

Store in original unopened packaging in a cool, dry place at temperatures between +5°C and +30°C, protected from frost. For short-term storage, stack no more than 3 pallets high. For long-term storage, pallets must not be stacked on top of one another.

Critical

It is dangerous to approach storage and application areas with open flames; these areas must be ventilated.

Critical

During application, appropriate work clothing, protective gloves, goggles and a mask must be worn in accordance with occupational health and safety regulations. Avoid contact with skin and eyes; in case of contact, wash thoroughly with plenty of water and soap. If swallowed, seek medical attention immediately.

Important

Food and beverages must not be brought into application areas. Store out of reach of children.

Information

The technical values above are given at +23°C and 50% relative humidity. Higher temperatures shorten the times; lower temperatures extend them.

Information

The product shelf life is 6 months when stored correctly at room temperature, away from direct sunlight, between +5°C and +30°C from the date of manufacture.

Information

After application, tools and equipment used should be cleaned with solvent (preferably xylene).

Related Products

OUR PRINCIPLES FOR PROCESSING PERSONAL DATA

All personal data processed by our Company is processed only in accordance with the procedures and principles laid down in the Law and in other laws. Pursuant to Article 4 of the KVKK, the basic principles we observe when processing your personal data are as follows:

Being processed lawfully and in accordance with the rules of good faith.
Being accurate and, where necessary, up to date.
Being processed for specific, explicit and legitimate purposes.
Being relevant, limited and proportionate to the purposes for which they are processed.
Being retained for the period stipulated in the relevant legislation or required for the purpose for which they are processed.

CATEGORIES OF DATA SUBJECTS

A separate policy applies to the processing of the personal data of our employees (including interns and subcontractor employees) whose personal data are processed by our Company. Data subjects other than employees, such as customers, potential customers, visitors, job candidates/interns and the employees, shareholders and officers of the institutions we cooperate with, may also address their requests to our Company under the KVKK.

PURPOSE OF PROCESSING AND TRANSFERRING PERSONAL DATA

Our Company processes personal data only for the purposes and under the conditions set out in the personal data processing conditions specified in Article 5, paragraph 2 and Article 6, paragraph 3 of Law No. 6698 on the Protection of Personal Data. Personal data may be processed where at least one of the items listed below is present:

The existence of the explicit consent of the data subject,
Being expressly provided for by law,
Being necessary for the protection of the life or physical integrity of the person himself or herself or of another person, where that person is unable to give consent due to actual impossibility or whose consent is not deemed legally valid,
Being necessary to process the personal data of the parties to a contract, provided that it is directly related to the conclusion or performance of that contract,
Being mandatory for the data controller to fulfil its legal obligation,
Having been made public by the data subject,
Being mandatory for the establishment, exercise or protection of a right,
Being mandatory for the legitimate interests of the data controller, provided that it does not harm the fundamental rights and freedoms of the data subject.

Under the conditions stated above, our Company may process personal data for the following purposes:

Evaluating potential suppliers/business partners,
Establishing and managing customer relations,
Conducting and concluding the contract process with our suppliers/business partners,
Conducting direct marketing processes,
Communication and support (upon your request),
Compliance with legal obligations,
Protecting the interests of the Company and ensuring its security,
Planning and carrying out the Company's commercial activities,
Reporting and auditing,
Protection of rights and interests.

We share your Personal Data with other parties, including professional advisers such as those listed below:

We share your personal data and your special categories of personal data, within the framework of legal grounds and your consent and within the scope of the personal data processing purposes stated above, with public institutions and organisations, banks, insurance companies, auditors, lawyers, accountants, other external professional advisers, the Joint Health and Safety Unit for the purpose of fulfilling occupational health and safety obligations, law enforcement authorities in line with our legal obligations, domestic and foreign service providers from which we receive services within the scope of marketing activities where consent has been given, and our contracted workplace physician.

WHEN DO WE COLLECT PERSONAL DATA ABOUT YOU?

We collect your personal data in the following cases:

When you visit our Company, or purchase or use our products and services,
If you are a natural or legal person purchasing goods and services from our Company,
When you sell us goods or provide us with services,
When you choose to receive our marketing communications,
When you contact us through our website, e-mail, social media platforms, other online channels or by telephone,
When you take part in our company events, social responsibility projects and organisations,
When you contact us for any purpose as a potential customer, supplier, business partner or subcontractor,
If you have applied for a job with our Company in any way or have made your CV and related information available for our Company's review.

We will process the personal data we obtain in the above cases only in accordance with this Notice.

WHICH OF YOUR PERSONAL DATA DO WE PROCESS?

Our personal data processing methods operate through our website, by telephone or e-mail, through electronic applications specific to our customers, through your participation in our business events and surveys, or through your interaction with us in any other way. In this context, the categories of personal data we process about you are as follows:

Identity information
Contact information
Images and/or videos that may identify you
Financial data
Any other information you decide to share with our Company of your own accord
Automatically collected electronic data
Legal transaction and compliance information
Corporate customer/Supplier data
Incident management and security information
Personal data collected from other sources

ON WHICH LEGAL GROUNDS DO WE PROCESS YOUR PERSONAL DATA?

Personal data is collected, used, recorded, stored and processed by our Company by providing data subjects with clear and comprehensible written information and, where necessary, obtaining their explicit consent, lawfully and in accordance with the rules of good faith, in a manner connected with and limited to the legitimate purpose clearly stated above, and within the framework of the principle of proportionality.

We process your personal data in line with the following legal grounds, which are set out in Article 5 of the KVKK and also appear under the heading "Purpose of Processing and Transferring Personal Data" of this policy, in particular the Turkish Commercial Code No. 6102, the Turkish Code of Obligations No. 6098, the Tax Procedure Law No. 213 and electronic commerce legislation:

The existence of the explicit consent of the data subject,
Being expressly provided for by law,
Being necessary for the protection of the life or physical integrity of the person himself or herself or of another person, where that person is unable to give consent due to actual impossibility or whose consent is not deemed legally valid,
Being necessary to process the personal data of the parties to a contract, provided that it is directly related to the conclusion or performance of that contract,
Being mandatory for the data controller to fulfil its legal obligation,
Having been made public by the data subject,
Being mandatory for the establishment, exercise or protection of a right,
Being mandatory for the legitimate interests of the data controller, provided that it does not harm the fundamental rights and freedoms of the data subject.

Where your Personal Data is processed on the basis of explicit consent, we would like to point out that if you withdraw your explicit consent, you will be removed from the commercial membership programme for which the processing based on that explicit consent is necessary, and that as of the relevant date you will no longer be able to benefit from the advantages you enjoyed through such processing.

RETENTION AND DESTRUCTION PERIODS FOR PERSONAL DATA

Your personal data will be stored for the retention periods specified in the relevant legislation or for as long as the processing purposes mentioned above require. At the end of this period, the data will be deleted, destroyed or anonymised in full compliance with the KVKK. In this context, a Personal Data Retention and Destruction Policy and the related procedures have been prepared and are applied.

HOW DO WE PROTECT YOUR PERSONAL DATA?

In order to protect your personal data and to prevent unlawful access to it, our Company takes the necessary administrative and technical measures in line with the Personal Data Security Guide published by the Personal Data Protection Authority, draws up internal procedures, prepares disclosure and explicit consent texts and, pursuant to Article 12/3 of the KVKK, carries out, or has carried out through external services, the audits necessary to ensure the implementation of the provisions of the KVKK.

WHAT ARE YOUR RIGHTS REGARDING YOUR PERSONAL DATA?

Pursuant to Article 11 of the KVKK, everyone has the following rights concerning themselves by applying to the data controller:

To learn whether personal data is processed,
To request information if personal data has been processed,
To learn the purpose of processing personal data and whether it is used in accordance with that purpose,
To know the third parties to whom personal data is transferred in Turkey or abroad,
To request the correction of personal data if it has been processed incompletely or incorrectly,
To request the deletion or destruction of personal data within the framework of the conditions set out in Article 7 of the KVKK,
To request that the operations carried out pursuant to subparagraphs (d) and (e) be notified to the third parties to whom the personal data has been transferred,
To object to a result arising against the person themselves through the analysis of the processed data exclusively by automated systems,
To request compensation for the damage suffered in the event of damage due to the unlawful processing of personal data.

TO MAKE A REQUEST UNDER THE PERSONAL DATA PROTECTION LAW

To obtain more detailed information about your Personal Data, you can access the information request application form from our company's website at https://www.foxbau.com/ and from the address Organize Sanayi Bölgesi 1. Kısım 7. Cadde No:6 Döşemealtı – Antalya / TÜRKİYE in person.

So that we can respond to your requests regarding your Personal Data as quickly as possible, your requests and questions must be submitted clearly, comprehensibly and with a specific date.

FOX PROCRETE® PRIMER

Product Description

Advantages

Usage Areas

Application Steps

Surface Quality Inspection

Surface Preparation

Material Conditioning

Mixing

Application

Tool Cleaning

Curing and Waiting Period

Related Products