FOX MULTISEAL® STANDART is a cement and polymer dispersion-based, two-component waterproofing material. The product prevents moisture, leakage and surface water on concrete surfaces through its capillary action mechanism, can be applied in both negative and positive directions, and meets TS EN 1504-2:2008 Principle 2.2 and 8.2 requirements.

Colour Palette

Packaging

25 kg

2 kg

TDS

Product Description

FOX MULTISEAL® STANDART is a cement and polymer dispersion-based, two-component waterproofing material that prevents moisture, leakage and surface water on concrete surfaces. Component A consists of special cement, mineral fillers and polymer; Component B consists of liquid polymer dispersion. The product provides resistance against 4 bar negative and 10 bar positive water pressure. Through its capillary action mechanism, it permanently fills the pores of concrete and seals water pathways. The product meets TS EN 1504-2:2008 Principle 2.2 and 8.2 requirements and is applied in two or three coats by brush or spray machine. Thanks to its high adhesion strength and semi-flexibility, it forms a waterproof layer beneath screeds and ceramics. Water vapour permeability (breathability) has been determined as S_D < 5 m in accordance with EN 7783-1 standards.

Key Benefits

Thanks to its application flexibility in both negative and positive directions, it provides complete protection in demanding areas such as basements, elevator pits and retaining walls.
The capillary action mechanism permanently fills the pores of concrete and seals water pathways, offering long-term waterproofing.
Resistance to 4 bar negative and 10 bar positive water pressure allows safe use in structures under high hydrostatic pressure.
Water vapour permeability (breathability) prevents moisture accumulation on the surface and preserves structural health.
Resistance to chemicals in soil, salt solutions and freeze-thaw cycles provides long-lasting protection in aggressive environments.
Fast and easy application by brush or spray machine saves labour and time.

Advantages

Easy to prepare and apply.
Long working time.
Effective in both negative and positive directions (4 bar negative – 10 bar positive).
Water vapour permeable (breathable).
Can be applied by brush or spray machine.
Has capillary action.
Very high adhesion strength. Works in conjunction with the bonded surface.
Thanks to high adhesion performance and semi-flexibility, it forms a waterproof layer beneath screeds and ceramics.
Forms a seamless, jointless, permanent, waterproof coating.
Resistant to chemicals in soil and salt solutions.
Resistant to freeze–thaw effects.

Property	Value
Material Composition – Component A	Special cement, mineral fillers, polymer
Material Composition – Component B	Liquid polymer dispersion
Density	1,95 kg/lt
Colour	Grey
Pull-off Adhesion Strength (EN 1542)	≥0,8 N/mm²
Water Vapour Permeability (EN 7783-1)	SD < 5 m
Capillary Water Absorption and Permeability (TS EN 1062-3)	W < 0,1 kg/(m²·h⁰˙⁵)
Application Substrate Temperature	+5°C / +25°C
Service Temperature	-20°C / +80°C
Pot Life of Fresh Mix	45 minutes
Ready for Use – Mechanical Strength	2 days
Ready for Use – Waterproofing	7 days
Overcoating (Plaster or Ceramic)	3 days
Shelf Life	12 months (between +5°C and +30°C, away from direct sunlight)
Standard Compliance	TS EN 1504-2:2008 Principle 2.2 and 8.2

Usage Areas

In interior and exterior areas, vertically and horizontally, in both negative and positive directions
In all wet areas such as bathrooms, balconies, etc.
In water and balance tanks
In wall and floor coverings of cold storage facilities
In foundations, retaining walls and shear walls
In elevator pits
In basements, in both negative and positive directions
In planter box waterproofing
In protecting concrete from water, carbonation and de-icing salts
In brine pools
In fish farming pools
In food storage facilities
In hydroelectric power plants

Application Steps

1
Surface Preparation
The surface to be treated must be sound and free from all oil, grease, rust, paraffin, paint and bitumen residues that could impair adhesion; all loose particles must be removed. Iron and wooden plugs on the surface must be removed; active water leaks must be repaired with FOX PLUG FC340, and voids, uneven surfaces and corners/edges must be repaired with FOX MORTAR FC188 T repair mortar to a minimum radius of 4 cm. The surface must be dampened with water prior to application; however, ponding must not be allowed.
2
Mixing
Half of the FOX MULTISEAL® STANDART Component B is poured into a clean mixing container. 5–5.5 litres of water are added. Component A is then added slowly and mixed with an electric mixer at 400–600 rpm for approximately 3–5 minutes. The mixture, which reaches a paste consistency, is left to rest for 2 minutes; the remaining Component B is added and mixed for a further 1–2 minutes. Mixing ratio: 25 kg Component A + 2 kg Component B + 5–5.5 litres of water.
3
Application
The prepared mixture is applied in two or three coats using a waterproofing brush or spray machine. The direction of brush application for each coat must be perpendicular to the previous coat. The waiting time between coats varies according to site conditions. The wet film thickness must not exceed 1.30 mm per coat. At corners, non-woven mesh (FOX PROMAT 135 Non-woven) or FOX TRIPLETAPE 120 chamfer tape application must use FOX MULTISEAL® FS488.
4
Tool and Equipment Cleaning
Tools and equipment used must be cleaned immediately with water after application. Once FOX MULTISEAL® STANDART has hardened, it can only be removed from the surface by mechanical means.

Critical

Application should not be carried out if the ambient and surface temperature is below +5°C or above +25°C; appropriate temperatures must be awaited. Application should also not be carried out in excessively hot, rainy or windy weather.

Critical

FOX MULTISEAL® STANDART applied at +23°C gains mechanical strength after 2 days, can be overcoated after 3 days, becomes waterproof after 7 days and reaches its final strength after 28 days.

Critical

For exterior surface applications, the surface must be protected from sunlight, wind, rain or frost for the first 24 hours.

Critical

In order for the material to complete its curing, the ambient and substrate temperature must not fall below the permitted minimum temperature.

Important

The wet film thickness in application must not exceed 1.30 mm per coat. Areas that need to be walked on must be covered with a screed containing FOX BINDER FM125 additive.

Important

For covering with ceramics, marble and similar products, the use of INNO-FIX series ceramic adhesives is recommended.

Information

The working and reaction times of cement and acrylic-based systems are affected by ambient and substrate temperature and relative humidity in the air. At low temperatures the reaction slows down; high temperatures accelerate the reaction.

Important

When stored correctly at room temperature, away from direct sunlight, between +5°C and +30°C, the shelf life is 12 months from the date of manufacture. Component B freezes below 0°C. Opened packages must be resealed tightly and used within 1 week.

Critical

It is dangerous to approach storage and application areas with open flame; areas must be ventilated. Work clothing, protective gloves, goggles and a mask must be worn during application. Contact with skin and eyes must be avoided; in case of contact, wash thoroughly with plenty of water and soap; if swallowed, consult a doctor immediately. Keep out of reach of children.

Related Products

OUR PRINCIPLES FOR PROCESSING PERSONAL DATA

All personal data processed by our Company is processed only in accordance with the procedures and principles laid down in the Law and in other laws. Pursuant to Article 4 of the KVKK, the basic principles we observe when processing your personal data are as follows:

Being processed lawfully and in accordance with the rules of good faith.
Being accurate and, where necessary, up to date.
Being processed for specific, explicit and legitimate purposes.
Being relevant, limited and proportionate to the purposes for which they are processed.
Being retained for the period stipulated in the relevant legislation or required for the purpose for which they are processed.

CATEGORIES OF DATA SUBJECTS

A separate policy applies to the processing of the personal data of our employees (including interns and subcontractor employees) whose personal data are processed by our Company. Data subjects other than employees, such as customers, potential customers, visitors, job candidates/interns and the employees, shareholders and officers of the institutions we cooperate with, may also address their requests to our Company under the KVKK.

PURPOSE OF PROCESSING AND TRANSFERRING PERSONAL DATA

Our Company processes personal data only for the purposes and under the conditions set out in the personal data processing conditions specified in Article 5, paragraph 2 and Article 6, paragraph 3 of Law No. 6698 on the Protection of Personal Data. Personal data may be processed where at least one of the items listed below is present:

The existence of the explicit consent of the data subject,
Being expressly provided for by law,
Being necessary for the protection of the life or physical integrity of the person himself or herself or of another person, where that person is unable to give consent due to actual impossibility or whose consent is not deemed legally valid,
Being necessary to process the personal data of the parties to a contract, provided that it is directly related to the conclusion or performance of that contract,
Being mandatory for the data controller to fulfil its legal obligation,
Having been made public by the data subject,
Being mandatory for the establishment, exercise or protection of a right,
Being mandatory for the legitimate interests of the data controller, provided that it does not harm the fundamental rights and freedoms of the data subject.

Under the conditions stated above, our Company may process personal data for the following purposes:

Evaluating potential suppliers/business partners,
Establishing and managing customer relations,
Conducting and concluding the contract process with our suppliers/business partners,
Conducting direct marketing processes,
Communication and support (upon your request),
Compliance with legal obligations,
Protecting the interests of the Company and ensuring its security,
Planning and carrying out the Company's commercial activities,
Reporting and auditing,
Protection of rights and interests.

We share your Personal Data with other parties, including professional advisers such as those listed below:

We share your personal data and your special categories of personal data, within the framework of legal grounds and your consent and within the scope of the personal data processing purposes stated above, with public institutions and organisations, banks, insurance companies, auditors, lawyers, accountants, other external professional advisers, the Joint Health and Safety Unit for the purpose of fulfilling occupational health and safety obligations, law enforcement authorities in line with our legal obligations, domestic and foreign service providers from which we receive services within the scope of marketing activities where consent has been given, and our contracted workplace physician.

WHEN DO WE COLLECT PERSONAL DATA ABOUT YOU?

We collect your personal data in the following cases:

When you visit our Company, or purchase or use our products and services,
If you are a natural or legal person purchasing goods and services from our Company,
When you sell us goods or provide us with services,
When you choose to receive our marketing communications,
When you contact us through our website, e-mail, social media platforms, other online channels or by telephone,
When you take part in our company events, social responsibility projects and organisations,
When you contact us for any purpose as a potential customer, supplier, business partner or subcontractor,
If you have applied for a job with our Company in any way or have made your CV and related information available for our Company's review.

We will process the personal data we obtain in the above cases only in accordance with this Notice.

WHICH OF YOUR PERSONAL DATA DO WE PROCESS?

Our personal data processing methods operate through our website, by telephone or e-mail, through electronic applications specific to our customers, through your participation in our business events and surveys, or through your interaction with us in any other way. In this context, the categories of personal data we process about you are as follows:

Identity information
Contact information
Images and/or videos that may identify you
Financial data
Any other information you decide to share with our Company of your own accord
Automatically collected electronic data
Legal transaction and compliance information
Corporate customer/Supplier data
Incident management and security information
Personal data collected from other sources

ON WHICH LEGAL GROUNDS DO WE PROCESS YOUR PERSONAL DATA?

Personal data is collected, used, recorded, stored and processed by our Company by providing data subjects with clear and comprehensible written information and, where necessary, obtaining their explicit consent, lawfully and in accordance with the rules of good faith, in a manner connected with and limited to the legitimate purpose clearly stated above, and within the framework of the principle of proportionality.

We process your personal data in line with the following legal grounds, which are set out in Article 5 of the KVKK and also appear under the heading "Purpose of Processing and Transferring Personal Data" of this policy, in particular the Turkish Commercial Code No. 6102, the Turkish Code of Obligations No. 6098, the Tax Procedure Law No. 213 and electronic commerce legislation:

The existence of the explicit consent of the data subject,
Being expressly provided for by law,
Being necessary for the protection of the life or physical integrity of the person himself or herself or of another person, where that person is unable to give consent due to actual impossibility or whose consent is not deemed legally valid,
Being necessary to process the personal data of the parties to a contract, provided that it is directly related to the conclusion or performance of that contract,
Being mandatory for the data controller to fulfil its legal obligation,
Having been made public by the data subject,
Being mandatory for the establishment, exercise or protection of a right,
Being mandatory for the legitimate interests of the data controller, provided that it does not harm the fundamental rights and freedoms of the data subject.

Where your Personal Data is processed on the basis of explicit consent, we would like to point out that if you withdraw your explicit consent, you will be removed from the commercial membership programme for which the processing based on that explicit consent is necessary, and that as of the relevant date you will no longer be able to benefit from the advantages you enjoyed through such processing.

RETENTION AND DESTRUCTION PERIODS FOR PERSONAL DATA

Your personal data will be stored for the retention periods specified in the relevant legislation or for as long as the processing purposes mentioned above require. At the end of this period, the data will be deleted, destroyed or anonymised in full compliance with the KVKK. In this context, a Personal Data Retention and Destruction Policy and the related procedures have been prepared and are applied.

HOW DO WE PROTECT YOUR PERSONAL DATA?

In order to protect your personal data and to prevent unlawful access to it, our Company takes the necessary administrative and technical measures in line with the Personal Data Security Guide published by the Personal Data Protection Authority, draws up internal procedures, prepares disclosure and explicit consent texts and, pursuant to Article 12/3 of the KVKK, carries out, or has carried out through external services, the audits necessary to ensure the implementation of the provisions of the KVKK.

WHAT ARE YOUR RIGHTS REGARDING YOUR PERSONAL DATA?

Pursuant to Article 11 of the KVKK, everyone has the following rights concerning themselves by applying to the data controller:

To learn whether personal data is processed,
To request information if personal data has been processed,
To learn the purpose of processing personal data and whether it is used in accordance with that purpose,
To know the third parties to whom personal data is transferred in Turkey or abroad,
To request the correction of personal data if it has been processed incompletely or incorrectly,
To request the deletion or destruction of personal data within the framework of the conditions set out in Article 7 of the KVKK,
To request that the operations carried out pursuant to subparagraphs (d) and (e) be notified to the third parties to whom the personal data has been transferred,
To object to a result arising against the person themselves through the analysis of the processed data exclusively by automated systems,
To request compensation for the damage suffered in the event of damage due to the unlawful processing of personal data.

TO MAKE A REQUEST UNDER THE PERSONAL DATA PROTECTION LAW

To obtain more detailed information about your Personal Data, you can access the information request application form from our company's website at https://www.foxbau.com/ and from the address Organize Sanayi Bölgesi 1. Kısım 7. Cadde No:6 Döşemealtı – Antalya / TÜRKİYE in person.

So that we can respond to your requests regarding your Personal Data as quickly as possible, your requests and questions must be submitted clearly, comprehensibly and with a specific date.

FOX MULTISEAL® STANDART

Product Description

Key Benefits

Advantages

Usage Areas

Application Steps

Surface Preparation

Mixing

Application

Tool and Equipment Cleaning

Related Products