FOX PURATHANE® BASECOAT 1K UV is a modified polyurethane-based, single-component, aliphatic, high abrasion-resistant thin coating material. With its UV resistance, excellent adhesion and chemical resistance properties, it is reliably used in areas exposed to medium/light traffic loads.

Colour Palette

RAL Colours

Packaging

5 kg

TDS

Product Description

FOX PURATHANE® BASECOAT 1K UV is a modified polyurethane-based, single-component, aliphatic, high abrasion-resistant coating material. Its formulation containing pigments and fillers provides a homogeneous surface appearance. With a density of 1,53±0,05 gr/cm³, the product is available in RAL colours and requires no thinning. At +23°C and 50% relative humidity, it offers approximately 175 s pendulum hardness (DIN 53 157) and ~50 mg Taber abrasion value according to ASTM D-4060. It can be opened to pedestrian traffic approximately 6 hours after application. It is applied by roller or steel trowel following FOX EPOTHANE® series primer application. Once cured, it can only be removed by mechanical means.

Advantages

UV resistant.
Provides excellent adhesion.
Excellent chemical resistance.
Excellent abrasion resistance.
Good mechanical resistance.
Flexible.
Economical.
Easy to apply.
Can be applied over asphalt.
High bonding strength.
Easy to maintain and clean.
Provides hygienic environments, does not retain dirt.
Easy to sterilise.
Fluid consistency.
Liquid-tight.

Property	Value
Density	1,53±0,05 gr/cm³
Colour	RAL Colours
Thinning	Not thinned
Substrate Temperature	+10°C / +30°C
Time to Pedestrian Traffic	~6 hours
Pendulum Hardness (DIN 53 157)	~175 s
Taber Abrasion (ASTM D-4060)	~50 mg (CS10, 1000 cycles, 10 N load)

Usage Areas

Areas exposed to medium/light traffic loads
Warehouses
Production areas
Aircraft hangars, airports
Car parks, garages
Shopping centres
Hotels
Hospitals and care homes
Areas where hygiene is required

Application Steps

1
Surface Preparation
The surface should be cleaned using pressurised water where possible; oil, grease, fuel and paraffin residues must be removed. Mould release agents, cement residues, shavings, loose particles and cured membranes must be completely removed from the surface. For substrate repairs, filling voids and levelling the surface, a mortar prepared by mixing FOX EPOTHANE® PRIMER series primer with 60–70 AFS (0.1–0.3 mm) quartz sand should be used.
2
Checking Application Conditions
Relative humidity must be a maximum of 80%. Surface temperature must be a minimum of +10°C and a maximum of +30°C; ambient temperature a minimum of +10°C and a maximum of +30°C; material temperature a minimum of +15°C and a maximum of +25°C. Care must be taken against dew point and condensation.
3
Mixing
Ensure that material temperatures are between +15°C and +25°C. Mix for 3–4 minutes using an electric mixer at 300–400 rpm with a suitable epoxy/polyurethane resin mixing paddle until a homogeneous colour is achieved and no product remains on the bottom or sides of the container. Avoid over-mixing to minimise air entrainment.
4
Priming
Surfaces to be coated must be pre-primed with FOX EPOTHANE® series primer. The substrate temperature must be a minimum of +8°C. After the primer has dried (minimum 6 hours), FOX PURATHANE® BASECOAT 1K UV application can commence.
5
Topcoat Application
FOX PURATHANE® BASECOAT 1K UV should be applied to the surface by roller or steel trowel. Care should be taken to ensure that successive coats are applied wet-on-wet to minimise roller marks. Application should be carried out along the short edge, with each new pass starting immediately adjacent to the previous one. A second roller pass should be made over the material to ensure homogeneous distribution and to eliminate roller marks.
6
Tool and Equipment Cleaning
After application, tools and equipment used should be cleaned with solvents such as FOX CS810 or FOX C380. Once FOX PURATHANE® BASECOAT 1K UV has cured, it can only be removed from the surface by mechanical means.

Critical

The surface and ambient temperature during application must be a minimum of +10°C and a maximum of +30°C. Application must not be carried out outside this temperature range.

Critical

Relative humidity must be a maximum of 80%. Care must be taken against dew point and condensation. The substrate temperature must be above +8°C; otherwise, dew formation and water vapour condensation will damage the coating.

Critical

After application is complete, the coating must be protected from direct water contact for at least 24 hours. In the event of water contact, the coating will soften and blister, losing its properties and requiring complete removal and reapplication.

Critical

FOX PURATHANE® BASECOAT 1K UV application must only commence after the FOX EPOTHANE® series primer has fully dried (minimum 6 hours).

Critical

Concrete surfaces to be coated with epoxy/polyurethane must be at least 3 weeks old prior to application, a vapour barrier layer must be created for slabs on grade, and the building's roof, walls, doors and windows must be completed.

Critical

Mixing must be carried out using an electric mixer at 300–400 rpm with an epoxy/polyurethane resin mixing paddle. Use of an unsuitable mixing paddle will entrain air into the product, causing air bubbles on the coating surface.

Important

The material temperature must be between +15°C and +25°C prior to application. In cold weather, packaging should be conditioned at +20°C – +25°C until ready for use.

Important

Materials to be used should be brought to the application site 1–2 days in advance and allowed to acclimatise to ambient conditions.

Important

Rain, dust, wind, animals and insects must be prevented from entering the area while the coating is still fresh.

Important

Store in the original unopened packaging in a cool, dry environment, protected from frost. For short-term storage, stack no more than 3 pallets high; for long-term storage, pallets must not be stacked on top of one another.

Critical

Open flames near storage and application areas are dangerous; these areas must be ventilated. Work clothing, protective gloves, goggles and a mask must be worn during application. In case of skin or eye contact, wash thoroughly with plenty of water and soap; if swallowed, seek medical attention immediately.

Information

Consumption values are given for ideal conditions assuming an ambient and surface temperature of +20°C. It should be noted that consumption will increase on damaged surfaces and in cold weather conditions.

Information

In resin-based systems, pot life and curing times are affected by ambient temperature, substrate temperature and air humidity. Curing slows at low temperatures and accelerates at high temperatures.

Related Products

OUR PRINCIPLES FOR PROCESSING PERSONAL DATA

All personal data processed by our Company is processed only in accordance with the procedures and principles laid down in the Law and in other laws. Pursuant to Article 4 of the KVKK, the basic principles we observe when processing your personal data are as follows:

Being processed lawfully and in accordance with the rules of good faith.
Being accurate and, where necessary, up to date.
Being processed for specific, explicit and legitimate purposes.
Being relevant, limited and proportionate to the purposes for which they are processed.
Being retained for the period stipulated in the relevant legislation or required for the purpose for which they are processed.

CATEGORIES OF DATA SUBJECTS

A separate policy applies to the processing of the personal data of our employees (including interns and subcontractor employees) whose personal data are processed by our Company. Data subjects other than employees, such as customers, potential customers, visitors, job candidates/interns and the employees, shareholders and officers of the institutions we cooperate with, may also address their requests to our Company under the KVKK.

PURPOSE OF PROCESSING AND TRANSFERRING PERSONAL DATA

Our Company processes personal data only for the purposes and under the conditions set out in the personal data processing conditions specified in Article 5, paragraph 2 and Article 6, paragraph 3 of Law No. 6698 on the Protection of Personal Data. Personal data may be processed where at least one of the items listed below is present:

The existence of the explicit consent of the data subject,
Being expressly provided for by law,
Being necessary for the protection of the life or physical integrity of the person himself or herself or of another person, where that person is unable to give consent due to actual impossibility or whose consent is not deemed legally valid,
Being necessary to process the personal data of the parties to a contract, provided that it is directly related to the conclusion or performance of that contract,
Being mandatory for the data controller to fulfil its legal obligation,
Having been made public by the data subject,
Being mandatory for the establishment, exercise or protection of a right,
Being mandatory for the legitimate interests of the data controller, provided that it does not harm the fundamental rights and freedoms of the data subject.

Under the conditions stated above, our Company may process personal data for the following purposes:

Evaluating potential suppliers/business partners,
Establishing and managing customer relations,
Conducting and concluding the contract process with our suppliers/business partners,
Conducting direct marketing processes,
Communication and support (upon your request),
Compliance with legal obligations,
Protecting the interests of the Company and ensuring its security,
Planning and carrying out the Company's commercial activities,
Reporting and auditing,
Protection of rights and interests.

We share your Personal Data with other parties, including professional advisers such as those listed below:

We share your personal data and your special categories of personal data, within the framework of legal grounds and your consent and within the scope of the personal data processing purposes stated above, with public institutions and organisations, banks, insurance companies, auditors, lawyers, accountants, other external professional advisers, the Joint Health and Safety Unit for the purpose of fulfilling occupational health and safety obligations, law enforcement authorities in line with our legal obligations, domestic and foreign service providers from which we receive services within the scope of marketing activities where consent has been given, and our contracted workplace physician.

WHEN DO WE COLLECT PERSONAL DATA ABOUT YOU?

We collect your personal data in the following cases:

When you visit our Company, or purchase or use our products and services,
If you are a natural or legal person purchasing goods and services from our Company,
When you sell us goods or provide us with services,
When you choose to receive our marketing communications,
When you contact us through our website, e-mail, social media platforms, other online channels or by telephone,
When you take part in our company events, social responsibility projects and organisations,
When you contact us for any purpose as a potential customer, supplier, business partner or subcontractor,
If you have applied for a job with our Company in any way or have made your CV and related information available for our Company's review.

We will process the personal data we obtain in the above cases only in accordance with this Notice.

WHICH OF YOUR PERSONAL DATA DO WE PROCESS?

Our personal data processing methods operate through our website, by telephone or e-mail, through electronic applications specific to our customers, through your participation in our business events and surveys, or through your interaction with us in any other way. In this context, the categories of personal data we process about you are as follows:

Identity information
Contact information
Images and/or videos that may identify you
Financial data
Any other information you decide to share with our Company of your own accord
Automatically collected electronic data
Legal transaction and compliance information
Corporate customer/Supplier data
Incident management and security information
Personal data collected from other sources

ON WHICH LEGAL GROUNDS DO WE PROCESS YOUR PERSONAL DATA?

Personal data is collected, used, recorded, stored and processed by our Company by providing data subjects with clear and comprehensible written information and, where necessary, obtaining their explicit consent, lawfully and in accordance with the rules of good faith, in a manner connected with and limited to the legitimate purpose clearly stated above, and within the framework of the principle of proportionality.

We process your personal data in line with the following legal grounds, which are set out in Article 5 of the KVKK and also appear under the heading "Purpose of Processing and Transferring Personal Data" of this policy, in particular the Turkish Commercial Code No. 6102, the Turkish Code of Obligations No. 6098, the Tax Procedure Law No. 213 and electronic commerce legislation:

The existence of the explicit consent of the data subject,
Being expressly provided for by law,
Being necessary for the protection of the life or physical integrity of the person himself or herself or of another person, where that person is unable to give consent due to actual impossibility or whose consent is not deemed legally valid,
Being necessary to process the personal data of the parties to a contract, provided that it is directly related to the conclusion or performance of that contract,
Being mandatory for the data controller to fulfil its legal obligation,
Having been made public by the data subject,
Being mandatory for the establishment, exercise or protection of a right,
Being mandatory for the legitimate interests of the data controller, provided that it does not harm the fundamental rights and freedoms of the data subject.

Where your Personal Data is processed on the basis of explicit consent, we would like to point out that if you withdraw your explicit consent, you will be removed from the commercial membership programme for which the processing based on that explicit consent is necessary, and that as of the relevant date you will no longer be able to benefit from the advantages you enjoyed through such processing.

RETENTION AND DESTRUCTION PERIODS FOR PERSONAL DATA

Your personal data will be stored for the retention periods specified in the relevant legislation or for as long as the processing purposes mentioned above require. At the end of this period, the data will be deleted, destroyed or anonymised in full compliance with the KVKK. In this context, a Personal Data Retention and Destruction Policy and the related procedures have been prepared and are applied.

HOW DO WE PROTECT YOUR PERSONAL DATA?

In order to protect your personal data and to prevent unlawful access to it, our Company takes the necessary administrative and technical measures in line with the Personal Data Security Guide published by the Personal Data Protection Authority, draws up internal procedures, prepares disclosure and explicit consent texts and, pursuant to Article 12/3 of the KVKK, carries out, or has carried out through external services, the audits necessary to ensure the implementation of the provisions of the KVKK.

WHAT ARE YOUR RIGHTS REGARDING YOUR PERSONAL DATA?

Pursuant to Article 11 of the KVKK, everyone has the following rights concerning themselves by applying to the data controller:

To learn whether personal data is processed,
To request information if personal data has been processed,
To learn the purpose of processing personal data and whether it is used in accordance with that purpose,
To know the third parties to whom personal data is transferred in Turkey or abroad,
To request the correction of personal data if it has been processed incompletely or incorrectly,
To request the deletion or destruction of personal data within the framework of the conditions set out in Article 7 of the KVKK,
To request that the operations carried out pursuant to subparagraphs (d) and (e) be notified to the third parties to whom the personal data has been transferred,
To object to a result arising against the person themselves through the analysis of the processed data exclusively by automated systems,
To request compensation for the damage suffered in the event of damage due to the unlawful processing of personal data.

TO MAKE A REQUEST UNDER THE PERSONAL DATA PROTECTION LAW

To obtain more detailed information about your Personal Data, you can access the information request application form from our company's website at https://www.foxbau.com/ and from the address Organize Sanayi Bölgesi 1. Kısım 7. Cadde No:6 Döşemealtı – Antalya / TÜRKİYE in person.

So that we can respond to your requests regarding your Personal Data as quickly as possible, your requests and questions must be submitted clearly, comprehensibly and with a specific date.

FOX PURATHANE® BASECOAT 1K UV

Product Description

Advantages

Usage Areas

Application Steps

Surface Preparation

Checking Application Conditions

Mixing

Priming

Topcoat Application

Tool and Equipment Cleaning

Related Products