FOX FILL&FINISH is an acrylic-based, ready-to-use, multi-purpose filling and surface levelling material developed for interior applications. It provides an excellent base on plasterboard joints, nail and screw marks, and plastered surfaces prior to painting or wallpapering.
Colour Palette
Packaging
20 kg
Product Description
FOX FILL&FINISH is an acrylic-based, ready-to-use, multi-purpose filling and surface levelling material developed for interior applications. It can be used for filling and smoothing plasterboard joints, covering nail and screw marks, surface preparation prior to painting and wallpapering over plaster or cement-based renders, and as a finishing plaster. When applied together with joint tape, it effectively seals joint gaps and cracks. Can be diluted with a maximum of 10% water.
Advantages
- Ready to use.
- Multi-purpose.
- Easy to apply.
- Easy to sand.
- Lightweight.
- High adhesion.
- Does not dust on the surface after drying.
Usage Areas
- Filling and smoothing plasterboard joints
- Repairing nail and screw marks and surface defects on plasterboard
- As a levelling filler prior to painting or wallpapering over plaster or cement-based render
- As a finishing plaster for plastered or plasterboard surfaces
- For surface preparation prior to painting in interior spaces
- For eliminating joint gaps and cracks when used together with joint tape
Application Steps
- 1
Surface Preparation
The surface to be treated must be free of loose particles and all residues that may reduce adhesion, such as oil, grease and dirt. Substances such as filler or paper residues must be removed from the surface. Plasterboard must be firmly fixed to dry, clean and dust-free substrates, and joints must be ensured to be free of dust.
- 2
Mixing
FOX FILL&FINISH must be mixed with an electric mixer at 400–600 rpm before use.
- 3
Dilution
If necessary, FOX FILL&FINISH can be diluted with a maximum of 10% water.
- 4
Application
FOX FILL&FINISH should be applied to the surface using a plastering knife, wide spatula, scraper or similar tools. Plasterboard joints, screw and nail marks must be filled neatly. Screw heads must be filled. The use of plaster joint tape is recommended for joint gaps. When applying multiple coats, the first coat must be allowed to dry completely before applying the next coat.
- 5
Tool Cleaning
After application, all tools and equipment used must be cleaned with water.
Critical
Do not apply below +10°C.
Information
Hot weather shortens the drying time; cold weather extends it.
Important
In thick-layer applications, longer drying times may occur depending on temperature and humidity.
Critical
When applying multiple coats, the first coat must be allowed to dry completely before applying the next coat.
Important
Can be stored for 12 months in its unopened packaging in a cool, dry place, protected from frost and direct sunlight. The lid must be closed airtight immediately after use.
Important
To preserve packaging integrity, pallets must not be stacked on top of each other and should be arranged in a single row. First-in, first-out rules must be observed during shipment.
Critical
It is dangerous to approach storage and application areas with open flame; these areas must be ventilated.
Important
During application, appropriate work clothing, protective gloves, goggles and a mask must be worn in accordance with occupational health and safety regulations.
Critical
Avoid contact with skin and eyes; in case of contact, wash immediately with plenty of water and soap. If swallowed, seek medical attention immediately.
Important
Food and beverages must not be brought into application areas. Store out of reach of children.
Related Products
Similar products to this item
