Purrazzo Contact • Signal White
FOX PURRAZZO CONTACT is a polyurethane resin-based, two-component, solvent-free, self-levelling micro terrazzo coating system with antibacterial properties. Layer structure: PRIMER HB primer, optional BASECOAT intermediate coat, FOX PURRAZZO CONTACT coating (3.5 kg/m²), FOX PURRAZZO CONTACT STONE broadcast (1.2 kg/m²) and TOPCOAT WB clear matt top coat.

Purrazzo Contact is offered in 18 stone colours; the natural stone texture comes from the broadcast coloured aggregate blend. The colour choice does not change the layer structure.

Application Surface
ColourSignal White
Floor
Primer
Intermediate Coat (Optional)
Coating
Broadcast
Top Coat
Layers & Products5 layers
  1. 1

    Primer

    Required

    Epoxy based, two-component, solvent-free, low-viscosity clear primer for damp surfaces; 0,1-0,3 mm (60-70 AFS) quartz sand is broadcast onto it.

    Epoxy based, two-component, solvent-free, low-viscosity clear primer for damp surfaces; 0,1-0,3 mm (60-70 AFS) quartz sand is broadcast onto it.

    Main Product 0,1-0,3 mm Kuvars Kumu (60-70 AFS)

    Epoxy based, two-component, solvent-free, low-viscosity clear primer for damp surfaces; 0,1-0,3 mm (60-70 AFS) quartz sand is broadcast onto it.

  2. 2

    Intermediate Coat (Optional)

    Required

    Epoxy based, two-component, solvent-free, self-levelling coating; 0,1-0,3 mm (60-70 AFS) quartz sand is broadcast onto it. OPTIONAL layer.

    Epoxy based, two-component, solvent-free, self-levelling coating; 0,1-0,3 mm (60-70 AFS) quartz sand is broadcast onto it. OPTIONAL layer.

    Main Product 0,1-0,3 mm Kuvars Kumu (60-70 AFS)

    Epoxy based, two-component, solvent-free, self-levelling coating; 0,1-0,3 mm (60-70 AFS) quartz sand is broadcast onto it. OPTIONAL layer.

  3. 3

    Coating

    Required

    Polyurethane-based, UV-resistant, water-repellent coating material.

    Main Product FOX PURRAZZO CONTACT

    Polyurethane-based, UV-resistant, water-repellent coating material.

  4. 4

    Broadcast

    Required

    Coloured aggregate mix developed for the broadcast terrazzo system. The colour is the selected Purrazzo Contact stone chart colour.

    Coloured aggregate mix developed for the broadcast terrazzo system. The colour is the selected Purrazzo Contact stone chart colour.

  5. 5

    Top Coat

    Required

    Polyurethane based, two-component, water-borne, aliphatic clear matt top coat floor coating with high abrasion and scratch resistance.

    Polyurethane based, two-component, water-borne, aliphatic clear matt top coat floor coating with high abrasion and scratch resistance.

About Purrazzo Contact

Purrazzo Contact is a polyurethane based broadcast micro terrazzo floor coating system that gives spaces a warm and natural feel with its natural stone touches. A coloured aggregate mix is broadcast onto the UV resistant, water repellent coating; it stands out through its durability and elegant appearance.

The concrete surface is prepared with abrasive equipment, primed with FOX EPOTHANE® PRIMER HB and broadcast with quartz sand; if there is any undulation it is levelled with FOX EPOTHANE® BASECOAT. The FOX PURRAZZO CONTACT A and B components are mixed and poured onto the surface at a consumption of 3.5 kg/m², spread with a trowel and broadcast with FOX PURRAZZO CONTACT STONE at 1.2 kg/m². After at least 48 hours the surface is sanded and the FOX PURATHANE® TOPCOAT WB clear matt final coat is applied.

Consumption figures are given for ideal conditions at +23 °C; they may vary depending on the surface and ambient conditions. A site visit with our expert team is recommended before the system solution.

Advantages

  • Warm and natural appearance with a natural stone texture.
  • It is applied seamlessly and easily.
  • Durable; excellent compressive and flexural strength.
  • The design you want, with different RAL colour options and aggregate.
  • Antibacterial and easy to clean; minimum maintenance.
  • It does not shrink.

Technical Specifications

Coating ProductFOX PURRAZZO CONTACT — polyurethane, two-component, solvent-free, 100% solids
Coating Consumption3,5 kg/m²
BroadcastFOX PURRAZZO CONTACT STONE — 1.2 kg/m²
PrimerFOX EPOTHANE® PRIMER HB + 0.1-0.3 mm quartz sand
Intermediate Coat (optional)FOX EPOTHANE® BASECOAT
Top CoatFOX PURATHANE® TOPCOAT WB clear matt
Colour18 stone colours
Density1.54±0.05 g/cm³
Adhesion Strength≥1.5 N/mm² to concrete
Shore D Hardness (7 days)≥50
Taber Abrasion (CS10, 1 kg, 1000 cycles)≥70 mg
Pot Life60 dakika
Application Temperature+10 °C / +30 °C
Ready for Use (20 °C)Foot traffic 24 hours, light traffic 3 days, full cure 7 days

System Detail

StageProduct / Application TypeColour
PrimerFOX EPOTHANE® PRIMER HBClear
Primer0,1-0,3 mm Kuvars Kumu (60-70 AFS)
Intermediate Coat (Optional)FOX EPOTHANE® BASECOAT
Intermediate Coat (Optional)0,1-0,3 mm Kuvars Kumu (60-70 AFS)
CoatingFOX PURRAZZO CONTACT
BroadcastFOX PURRAZZO CONTACT STONE
Top CoatFOX PURATHANE® TOPCOAT WBClear Matt

Areas of Use

  • Airports and Metro Stations
  • Galleries
  • Shopping Centres and Supermarkets
  • Shops and Showrooms
  • Hotels
  • Hospitals and Care Homes
  • Medical practices
  • Schools and Nurseries
  • Aircraft Hangars and Garages
  • Areas Requiring Hygiene

Which floors can it be applied to?

Applied to concrete floors at least 3 weeks old with ≥25 N/mm² compressive and ≥1.5 N/mm² tensile strength; moisture must be ≤4%, the floor temperature at least +10 °C and 3 °C above the dew point. Cement laitance is removed by shot blasting, milling or diamond grinding; repairs are made with FOX EPOTHANE® PRIMER + quartz sand mortar.

Is the Intermediate Coat (FOX EPOTHANE® BASECOAT) mandatory?

No, it is optional; it is applied if there is undulation on the surface or if preferred. For conditions outside the standard, contact technical service for system details.

How is it maintained?

The seamless (jointless) surface does not hold dirt; it is easy to clean, requires minimum maintenance and is simple to repair. After application the coating must be protected from direct water contact for at least 24 hours.

What are the colour options?

Each Purrazzo system is offered with its own colour chart; the desired design can be achieved with different RAL colour options. The colours on the chart may differ from the original colours depending on the printing technique and the ambient light.

Where does the stone texture come from?

FOX PURRAZZO CONTACT STONE is a coloured aggregate blend developed for the broadcast terrazzo system; it is broadcast at 1.2 kg/m² onto the fresh coating and the natural stone appearance emerges after sanding.

When is the coating ready for use?

At 20 °C it is opened to foot traffic after 24 hours and to light traffic after 3 days; it reaches full cure in 7 days. At 10 °C these periods extend to 30 hours / 4 days / 10 days.

System Products

Let's Work Together

Let us find the right solution for your space together

Fill in the form with your questions or project request; our team will contact you as soon as possible.

Purrazzo Contact application
Purrazzo Contact