Decoflake Decorative Systems

Dekoflake • Cobalt • Classic • Full Coverage

The DECOFLAKE CLASSIC SYSTEM is an epoxy-based decorative flake coating system with high chemical resistance. FOX DECOFLAKE vinyl flakes, broadcast onto the coloured coating while it is still wet, are locked in by a clear top coat; system thickness 0.5-1.0 mm.

Decoflake Classic · Full Coverage; FOX DECOFLAKE is broadcast at a consumption of ~0.30 kg/m² (full coverage — the flakes cover the surface completely). The system type determines the layer products, while the coverage type determines the broadcast consumption and the surface appearance; the flake selection only shows the colours photographed for the selected coverage.

System Type

Coverage Type

Flake Colours

Application Area

Consumption Calculation

Calculate the amount of material needed for the system.

Floor

Primer

Coating

Broadcast

Top Coat

Optional Top Coat

Layers & Products6 layers

1

Primer
Required

Optionally, where the substrate is weak, FOX PURATHANE® PRIMER 1K should be used as a primer before applying FOX EPOTHANE® COLORTOP.

Main Product FOX PURATHANE® PRIMER 1K
~0.15 kg/m²

A polyurethane-based, one-component, solvent-borne, flexible, watertight, fast-curing, low-viscosity primer.

Packaging
18 kg
5 kg
2

Primer
Required

Main Product FOX EPOTHANE® COLORTOP
~0.25 kg/m²

An epoxy-based, two-component, solvent-free, coloured primer and coating material; it can be applied with a roller or a trowel.

Packaging
30 kg
5 kg
3

Coating
Required

The coating colour can affect the final appearance of the FOX DECOFLAKE system. The coating colours commonly used in the system are RAL 9010, RAL 7001, RAL 7032 and RAL 7035.

Main Product FOX EPOTHANE® COLORTOP
~0.25 kg/m²

An epoxy-based, two-component, solvent-free, coloured primer and coating material; it can be applied with a roller or a trowel. The most commonly used colours are RAL9010, RAL7001, RAL7032 and RAL7035.

Packaging
30 kg
5 kg
4

Broadcast
Required

Broadcast at a consumption of approximately 0,30 kg/m² for full coverage, approximately 0,10 kg/m² for standard coverage and approximately 0,03 kg/m² for light coverage.

Main Product FOX DECOFLAKE
~0.3 kg/m²

Vinyl flake chips — full coverage, ~0.30 kg/m²

Packaging
1 kg
4A

Scraping, Sanding and Vacuuming
Interlayer Step

After curing, the excess and loose flake on the surface is cleaned off in two directions by scraping; sanding (40 grit) is carried out for minimum roughness and the surface is vacuumed.
5

Top Coat
Required

Main Product FOX EPOTHANE® TOPCOAT CLEAR
~0.25 kg/m²

An epoxy-based, two-component, solvent-free, clear finish coat material; it can be applied with a trowel or a roller.

Packaging
30 kg
5 kg
6

Optional Top Coat
Optional

Depending on the desired surface appearance, an optional top coat can be applied. FOX DOMINO® AC SEALER FD792 can be used for an extra gloss appearance, and FOX PURATHANE® TOPCOAT WB CLEAR MATT for a matt appearance.

Main Product FOX DOMINO® AC SEALER FD792
~0.03 kg/m²

An acrylic-based, one-component, water-based, dust-proofing, water-repellent finish coat protective material providing extra gloss

Packaging
5 kg

Alternative FOX PURATHANE® TOPCOAT WB ŞEFFAF MAT
~0.1 kg/m²

A polyurethane-based, two-component, water-based matt finish coat protective material

Packaging
5 kg

About Decoflake Classic · Full Coverage

Decoflake Classic · Full Coverage is an epoxy-based decorative flake floor coating system with high chemical resistance. FOX DECOFLAKE vinyl flake chips, available in a range of colour options, are broadcast at full coverage density onto the FOX EPOTHANE® COLORTOP coloured coating layer.

The prepared concrete surface is primed with FOX EPOTHANE® COLORTOP; FOX EPOTHANE® COLORTOP is then poured onto the surface, spread with a notched trowel and back-rolled with a roller. While the coating is still wet, FOX DECOFLAKE is broadcast at ~0.30 kg/m². After 24 hours, excess and loose flakes are scraped off in two directions, then sanded with 40-grit abrasive and vacuumed. FOX EPOTHANE® TOPCOAT CLEAR is applied as the top coat with a trowel and back-rolled; for a matt appearance FOX PURATHANE® TOPCOAT WB CLEAR MATT, and for extra gloss FOX DOMINO® AC SEALER FD792, can be applied as an optional top coat. The surface can be walked on 24 hours after application is completed; it reaches its final mechanical and chemical resistance in 7 days.

Consumption figures are given for ideal conditions at +20 °C; the primer and consumption figures may vary depending on the condition of the floor and the ambient conditions. A site visit by our expert team is recommended before deciding on a system solution.

Advantages

Suitable for both decorative and industrial use.
The coloured FOX DECOFLAKE it contains gives floors a modern, elegant appearance.
Its abrasion resistance provides long-lasting solutions.
Easy to clean.
Offers slip resistance.
Applied at a thin 0.5-1.0 mm thickness.

Technical Specifications

System Type	Epoxy-based decorative flake floor coating system
System Thickness	~0.5-1.0 mm
Coverage Type	Full Coverage — FOX DECOFLAKE ~0.30 kg/m²
Primer	FOX EPOTHANE® COLORTOP
Coloured Coating	FOX EPOTHANE® COLORTOP
Top Coat	FOX EPOTHANE® TOPCOAT CLEAR
Optional Top Coat	FOX PURATHANE® TOPCOAT WB CLEAR MATT (matt) or FOX DOMINO® AC SEALER FD792 (extra gloss)
Appearance	Gloss / Matt
Colour	FOX DECOFLAKE colour range; coating base in RAL colours (most commonly RAL 9010, 7001, 7032, 7035)
Adhesion Strength	≥2.5 N/mm² to concrete
Shore D Hardness	≥75
UV Resistance	None — a UV or Fast system is recommended for exterior use
Application Temperature	+10 °C / +30 °C (ambient and surface)
Ready for Use	Foot traffic 24 hours, final strength 7 days (25 °C)
Cleaning	FOX CLEANER FR340

System Detail

Stage	Product / Application Type	Consumption
Primer	FOX PURATHANE® PRIMER 1K	0.15 kg/m²
Primer	FOX EPOTHANE® COLORTOP	0.25 kg/m²
Coating	FOX EPOTHANE® COLORTOP	0.25 kg/m²
Broadcast	FOX DECOFLAKE	0.3 kg/m²
Top Coat	FOX EPOTHANE® TOPCOAT CLEAR	0.25 kg/m²
Optional Top Coat	FOX DOMINO® AC SEALER FD792	0.03 kg/m²

Areas of Use

Shops, Shopping Centres and Offices
Laboratories and Hospitals
Showrooms, Garages and Hotels
Schools and Nurseries
Aircraft Hangars and Airports
Sports Halls
Light Industrial Facilities and Warehouses

Which floors can it be applied to?

Applied to concrete floors at least 28 days old, of minimum class C20 and with a tensile strength above 1.5 N/mm²; moisture at a depth of 2 cm must be below 4 %. Laitance is removed by shot blasting, milling or diamond grinding; repairs are made with FOX MORTAR FC188 T / FOX FASTMORTAR FC245 / FC233.

What is the difference between full, standard and light coverage?

The difference lies in the amount of flake broadcast: full coverage at ~300 g/m² covers the surface completely, standard coverage at 60-100 g/m² leaves the coloured coating visible between the flakes, and light coverage at 20-30 g/m² remains as an accent. This system is broadcast at full coverage; the coating colour influences the overall appearance.

What is the difference between the Classic, Fast and UV systems?

Classic is epoxy-based and offers high chemical resistance; UV is polyurethane-based and does not yellow in sunlight; Fast is polyaspartic-based, is both UV resistant and can be walked on within 2-4 hours. Flake broadcasting and finishing are the same for all three.

Matt or gloss?

The standard finish is gloss, with FOX EPOTHANE® TOPCOAT CLEAR. For a matt appearance FOX PURATHANE® TOPCOAT WB CLEAR MATT, and for extra gloss FOX DOMINO® AC SEALER FD792, is applied as an optional top coat.

Is it slip resistant?

Yes. The texture of FOX DECOFLAKE gives the floor slip resistance; the texture is more pronounced at light and standard coverage.

When is the coating ready for use and how is it maintained?

It can be walked on after 24 hours at 25 °C; final strength is reached in 7 days. It must be protected from direct water contact for the first 24 hours. Cleaning epoxy floor coatings with FOX CLEANER FR340 is recommended.

System Products

All Products

FOX PURATHANE® PRIMER 1K

FOX PURATHANE® PRIMER 1K is a polyurethane-based, single-component, solvent-borne, flexible and fast-curing low-viscosity primer. Used as a primer beneath polyurethane waterproofing coatings.

Suitable for interior and exterior applications.
Provides excellent adhesion.
Offers excellent chemical resistance.

FOX EPOTHANE® COLORTOP

FOX EPOTHANE® COLORTOP is a two-component, epoxy resin-based, roller-applied coloured primer and coating material. It is used on interior horizontal surfaces requiring high chemical and abrasion resistance.

Can be used as both primer and topcoat.
Easy to apply.
Can be highly filled with aggregates.

FOX DECOFLAKE

FOX DECOFLAKE is a vinyl flake chips product with a wide range of colour options, used in decorative floor coating systems. Compatible with epoxy, polyurethane, and polyaspartic-based systems.

Suitable for decorative and industrial use.
Decoflake gives floors a modern and stylish appearance.
Provides long-lasting solutions thanks to its abrasion resistance.

FOX EPOTHANE® TOPCOAT CLEAR

FOX EPOTHANE® TOPCOAT CLEAR is a two-component, solvent-free, self-levelling transparent epoxy topcoat floor coating material with high chemical and mechanical resistance. Used in decorative flooring applications, hospitals, hotels, schools and commercial areas.

Has high chemical and mechanical resistance.
Easy to maintain and clean.
Flowable.

FOX PURATHANE® TOPCOAT WB

FOX PURATHANE® TOPCOAT WB is a modified polyurethane-based, two-component, water-based, UV-resistant topcoat with high abrasion resistance, containing aliphatic isocyanate. It is used in epoxy and polyurethane floor systems, on walls and in various industrial areas.

UV resistant.
Provides excellent adhesion.
Has excellent abrasion resistance.

FOX DOMINO® AC SEALER FD792

FOX DOMINO® AC SEALER FD792 is a single-component, water-based, acrylic-based protective topcoat material that prevents dusting on all types of concrete floors and forms a glossy, protective film layer.

Provides diamond-like clarity and gloss.
Cures faster than conventional topcoat coatings.
Resistant to soiling, high-heel marks, and wheelchair tyre (black) marks.

FOX ASPARTHANE® PRIMER

FOX ASPARTHANE® PRIMER is a polyaspartic-based, two-component, low-viscosity, fast-curing transparent primer set. It is used as a primer before polyaspartic, epoxy, and polyurethane floor coatings.

It is an aliphatic primer.
Suitable for indoor and outdoor use.
High chemical and mechanical resistance.

FOX ASPARTHANE® BASECOAT

FOX ASPARTHANE® BASECOAT is a polyaspartic-based, two-component, solvent-free and fast-setting glossy floor coating material. With its high chemical and mechanical resistance, it is reliably used in industrial and commercial areas.

High chemical and mechanical resistance (4 times compared to epoxy).
Fast setting (can be opened to pedestrian traffic after approximately 2 hours).
It is an aliphatic coating.

FOX ASPARTHANE® CLEARCOAT

FOX ASPARTHANE® CLEARCOAT is a polyaspartic-based, two-component, solvent-free, fast-setting transparent floor coating. With its high chemical resistance and glossy appearance, it is used as a topcoat on industrial and commercial floors.

High chemical and mechanical resistance (4 times compared to epoxy).
Fast setting (can be opened to pedestrian traffic after approximately 2 hours).
It is an aliphatic coating.

FOX EPOTHANE® PRIMER

FOX EPOTHANE® PRIMER is an epoxy-based, two-component, solvent-free and low-viscosity transparent primer. It is used to provide high bond strength before epoxy and polyurethane floor coatings.

Suitable for interior and exterior use.
Can accept a high proportion of fillers.
Offers high chemical and mechanical resistance.

FOX PURATHANE® BASECOAT UV

FOX PURATHANE® BASECOAT UV is a two-component, solvent-free and UV-resistant, self-levelling polyurethane-based coloured floor coating material. It offers a decorative and hygienic flooring solution for hotels, hospitals, offices and commercial areas.

Easy to apply.
Provides excellent adhesion.
UV-resistant, does not yellow.

FOX PURATHANE® BASECOAT 1K CLEAR

FOX PURATHANE ® BASECOAT 1K CLEAR is a modified polyurethane based, one-component, aliphatic, solvent-borne coating material with high abrasion resistance and UV resistance that does not yellow.

FOX PURRAZZO CLEAR UV

FOX PURRAZZO CLEAR UV is a UV-resistant, non-yellowing, two-component aliphatic polyurethane-based transparent floor coating material. Suitable for decorative floors, car parks, hospitals and hygienic areas.

Provides excellent adhesion.
Has excellent chemical resistance.
Has excellent abrasion resistance.

Let's Work Together

Let us find the right solution for your space together

Fill in the form with your questions or project request; our team will contact you as soon as possible.

Decoflake

Fox Bau Yapı Kimyasalları Anonim Şirketi regards the protection of fundamental rights and freedoms above all, together with the protection of privacy, the provision and maintenance of information security and respect for ethical values, as among its primary principles. In order to fulfil the disclosure obligation arising from Article 10 of the Personal Data Protection Law, our company, which holds the title of "Data Controller" under Law No. 6698 on the Protection of Personal Data (KVKK), submits for your information the following explanations concerning the processing and protection of your personal data and your special categories of personal data. The term "personal data" used in this document is used so as to cover special categories of personal data as well.

If you do not accept this policy, you should not send us your personal data. However, we would like to point out that in that case there may be disruptions in the services we provide to you and that the service offered may not be fully functional.

We note that you are responsible for the accuracy and currency of the personal data you send us; and if you share the personal data of other people with us, it will be understood that you have obtained from the third party concerned all the permissions required for us to collect, process, use and disclose the information belonging to them, and our Company cannot be held liable in this respect.

OUR PRINCIPLES FOR PROCESSING PERSONAL DATA

All personal data processed by our Company is processed only in accordance with the procedures and principles laid down in the Law and in other laws. Pursuant to Article 4 of the KVKK, the basic principles we observe when processing your personal data are as follows:

Being processed lawfully and in accordance with the rules of good faith.
Being accurate and, where necessary, up to date.
Being processed for specific, explicit and legitimate purposes.
Being relevant, limited and proportionate to the purposes for which they are processed.
Being retained for the period stipulated in the relevant legislation or required for the purpose for which they are processed.

CATEGORIES OF DATA SUBJECTS

A separate policy applies to the processing of the personal data of our employees (including interns and subcontractor employees) whose personal data are processed by our Company. Data subjects other than employees, such as customers, potential customers, visitors, job candidates/interns and the employees, shareholders and officers of the institutions we cooperate with, may also address their requests to our Company under the KVKK.

PURPOSE OF PROCESSING AND TRANSFERRING PERSONAL DATA

Our Company processes personal data only for the purposes and under the conditions set out in the personal data processing conditions specified in Article 5, paragraph 2 and Article 6, paragraph 3 of Law No. 6698 on the Protection of Personal Data. Personal data may be processed where at least one of the items listed below is present:

The existence of the explicit consent of the data subject,
Being expressly provided for by law,
Being necessary for the protection of the life or physical integrity of the person himself or herself or of another person, where that person is unable to give consent due to actual impossibility or whose consent is not deemed legally valid,
Being necessary to process the personal data of the parties to a contract, provided that it is directly related to the conclusion or performance of that contract,
Being mandatory for the data controller to fulfil its legal obligation,
Having been made public by the data subject,
Being mandatory for the establishment, exercise or protection of a right,
Being mandatory for the legitimate interests of the data controller, provided that it does not harm the fundamental rights and freedoms of the data subject.

Under the conditions stated above, our Company may process personal data for the following purposes:

Evaluating potential suppliers/business partners,
Establishing and managing customer relations,
Conducting and concluding the contract process with our suppliers/business partners,
Conducting direct marketing processes,
Communication and support (upon your request),
Compliance with legal obligations,
Protecting the interests of the Company and ensuring its security,
Planning and carrying out the Company's commercial activities,
Reporting and auditing,
Protection of rights and interests.

We share your Personal Data with other parties, including professional advisers such as those listed below:

We share your personal data and your special categories of personal data, within the framework of legal grounds and your consent and within the scope of the personal data processing purposes stated above, with public institutions and organisations, banks, insurance companies, auditors, lawyers, accountants, other external professional advisers, the Joint Health and Safety Unit for the purpose of fulfilling occupational health and safety obligations, law enforcement authorities in line with our legal obligations, domestic and foreign service providers from which we receive services within the scope of marketing activities where consent has been given, and our contracted workplace physician.

WHEN DO WE COLLECT PERSONAL DATA ABOUT YOU?

We collect your personal data in the following cases:

When you visit our Company, or purchase or use our products and services,
If you are a natural or legal person purchasing goods and services from our Company,
When you sell us goods or provide us with services,
When you choose to receive our marketing communications,
When you contact us through our website, e-mail, social media platforms, other online channels or by telephone,
When you take part in our company events, social responsibility projects and organisations,
When you contact us for any purpose as a potential customer, supplier, business partner or subcontractor,
If you have applied for a job with our Company in any way or have made your CV and related information available for our Company's review.

We will process the personal data we obtain in the above cases only in accordance with this Notice.

WHICH OF YOUR PERSONAL DATA DO WE PROCESS?

Our personal data processing methods operate through our website, by telephone or e-mail, through electronic applications specific to our customers, through your participation in our business events and surveys, or through your interaction with us in any other way. In this context, the categories of personal data we process about you are as follows:

Identity information
Contact information
Images and/or videos that may identify you
Financial data
Any other information you decide to share with our Company of your own accord
Automatically collected electronic data
Legal transaction and compliance information
Corporate customer/Supplier data
Incident management and security information
Personal data collected from other sources

ON WHICH LEGAL GROUNDS DO WE PROCESS YOUR PERSONAL DATA?

Personal data is collected, used, recorded, stored and processed by our Company by providing data subjects with clear and comprehensible written information and, where necessary, obtaining their explicit consent, lawfully and in accordance with the rules of good faith, in a manner connected with and limited to the legitimate purpose clearly stated above, and within the framework of the principle of proportionality.

We process your personal data in line with the following legal grounds, which are set out in Article 5 of the KVKK and also appear under the heading "Purpose of Processing and Transferring Personal Data" of this policy, in particular the Turkish Commercial Code No. 6102, the Turkish Code of Obligations No. 6098, the Tax Procedure Law No. 213 and electronic commerce legislation:

The existence of the explicit consent of the data subject,
Being expressly provided for by law,
Being necessary for the protection of the life or physical integrity of the person himself or herself or of another person, where that person is unable to give consent due to actual impossibility or whose consent is not deemed legally valid,
Being necessary to process the personal data of the parties to a contract, provided that it is directly related to the conclusion or performance of that contract,
Being mandatory for the data controller to fulfil its legal obligation,
Having been made public by the data subject,
Being mandatory for the establishment, exercise or protection of a right,
Being mandatory for the legitimate interests of the data controller, provided that it does not harm the fundamental rights and freedoms of the data subject.

Where your Personal Data is processed on the basis of explicit consent, we would like to point out that if you withdraw your explicit consent, you will be removed from the commercial membership programme for which the processing based on that explicit consent is necessary, and that as of the relevant date you will no longer be able to benefit from the advantages you enjoyed through such processing.

RETENTION AND DESTRUCTION PERIODS FOR PERSONAL DATA

Your personal data will be stored for the retention periods specified in the relevant legislation or for as long as the processing purposes mentioned above require. At the end of this period, the data will be deleted, destroyed or anonymised in full compliance with the KVKK. In this context, a Personal Data Retention and Destruction Policy and the related procedures have been prepared and are applied.

HOW DO WE PROTECT YOUR PERSONAL DATA?

In order to protect your personal data and to prevent unlawful access to it, our Company takes the necessary administrative and technical measures in line with the Personal Data Security Guide published by the Personal Data Protection Authority, draws up internal procedures, prepares disclosure and explicit consent texts and, pursuant to Article 12/3 of the KVKK, carries out, or has carried out through external services, the audits necessary to ensure the implementation of the provisions of the KVKK.

WHAT ARE YOUR RIGHTS REGARDING YOUR PERSONAL DATA?

Pursuant to Article 11 of the KVKK, everyone has the following rights concerning themselves by applying to the data controller:

To learn whether personal data is processed,
To request information if personal data has been processed,
To learn the purpose of processing personal data and whether it is used in accordance with that purpose,
To know the third parties to whom personal data is transferred in Turkey or abroad,
To request the correction of personal data if it has been processed incompletely or incorrectly,
To request the deletion or destruction of personal data within the framework of the conditions set out in Article 7 of the KVKK,
To request that the operations carried out pursuant to subparagraphs (d) and (e) be notified to the third parties to whom the personal data has been transferred,
To object to a result arising against the person themselves through the analysis of the processed data exclusively by automated systems,
To request compensation for the damage suffered in the event of damage due to the unlawful processing of personal data.

TO MAKE A REQUEST UNDER THE PERSONAL DATA PROTECTION LAW

To obtain more detailed information about your Personal Data, you can access the information request application form from our company's website at https://www.foxbau.com/ and from the address Organize Sanayi Bölgesi 1. Kısım 7. Cadde No:6 Döşemealtı – Antalya / TÜRKİYE in person.

So that we can respond to your requests regarding your Personal Data as quickly as possible, your requests and questions must be submitted clearly, comprehensibly and with a specific date.

Dekoflake

Primer