Purrazzo Dual • Quartz Feather
FOX PURRAZZO DUAL is a polyurethane-based, self-levelling decorative floor coating system that creates rich and vivid colour transitions by mixing two different FOX PURRAZZO SOLE colours (Colored 1 + Colored 2) in place. The layer structure is the same as Sole: PRIMER HB primer, optional BASECOAT intermediate coat, two-colour SOLE coating and TOPCOAT WB clear matt top coat.

Purrazzo Dual is offered in 19 ready-made colour combinations; each combination is a blend of two Sole colours. The colour choice does not change the layer structure.

Application Surface
ColourQuartz Feather
Floor
Primer
Intermediate Coat (Optional)
Coating
Top Coat
Layers & Products4 layers
  1. 1

    Primer

    Required

    Epoxy based, two-component, solvent-free, low-viscosity clear primer for damp surfaces; 0,1-0,3 mm (60-70 AFS) quartz sand is broadcast onto it.

    Epoxy based, two-component, solvent-free, low-viscosity clear primer for damp surfaces; 0,1-0,3 mm (60-70 AFS) quartz sand is broadcast onto it.

    Main Product 0,1-0,3 mm Kuvars Kumu (60-70 AFS)

    Epoxy based, two-component, solvent-free, low-viscosity clear primer for damp surfaces; 0,1-0,3 mm (60-70 AFS) quartz sand is broadcast onto it.

  2. 2

    Intermediate Coat (Optional)

    Required

    Epoxy based, two-component, solvent-free, self-levelling coating; 0,1-0,3 mm (60-70 AFS) quartz sand is broadcast onto it. OPTIONAL layer.

    Main Product 0,1-0,3 mm Kuvars Kumu (60-70 AFS)

    Epoxy based, two-component, solvent-free, self-levelling coating; 0,1-0,3 mm (60-70 AFS) quartz sand is broadcast onto it. OPTIONAL layer.

    Epoxy based, two-component, solvent-free, self-levelling coating; 0,1-0,3 mm (60-70 AFS) quartz sand is broadcast onto it. OPTIONAL layer.

  3. 3

    Coating

    Required

    Polyurethane based, self-levelling floor coating material applied by blending two different Purrazzo Sole colours. The colour is the selected Purrazzo Dual chart combination.

    Polyurethane based, self-levelling floor coating material applied by blending two different Purrazzo Sole colours. The colour is the selected Purrazzo Dual chart combination.

    Polyurethane based, self-levelling floor coating material applied by blending two different Purrazzo Sole colours. The colour is the selected Purrazzo Dual chart combination.

  4. 4

    Top Coat

    Required

    Polyurethane based, two-component, water-borne, aliphatic clear matt top coat floor coating with high abrasion and scratch resistance.

    Polyurethane based, two-component, water-borne, aliphatic clear matt top coat floor coating with high abrasion and scratch resistance.

About Purrazzo Dual

Purrazzo Dual is a polyurethane based decorative floor coating with rich and vivid colour transitions created by mixing two different Purrazzo Sole colours. It is ideal for large and dynamic spaces such as galleries, shopping centres and supermarkets; the harmonious transitions between the colours give every space a distinctive appearance.

The concrete surface is primed with FOX EPOTHANE® PRIMER HB and broadcast with quartz sand; if necessary, the FOX EPOTHANE® BASECOAT intermediate coat is applied. The two FOX PURRAZZO SOLE colours (Colored 1 and Colored 2) are mixed separately, poured onto the surface and worked into each other with a notched trowel to create the pattern; the air is released with a spiked roller. The cured surface is protected with the FOX PURATHANE® TOPCOAT WB clear matt final coat. The technical values belong to the FOX PURRAZZO SOLE product.

Every application is unique because it depends on manual workmanship; the combinations in the chart are representative patterns. A site visit with our expert team is recommended before the system solution.

Advantages

  • Unique, vivid colour transitions created by mixing the two colours in place.
  • It is applied seamlessly and easily.
  • UV resistant, does not yellow.
  • Excellent compressive and flexural strength.
  • Easy to clean, requires minimum maintenance.
  • Does not shrink; provides sound acoustics.

Technical Specifications

System Thickness1.5-2.5 mm (recommended)
Coating ProductFOX PURRAZZO SOLE COLORED 1 + COLORED 2 — polyurethane, two-component, solvent-free
Coating Consumption~2.0 kg/m² (total)
PrimerFOX EPOTHANE® PRIMER HB + 0.1-0.3 mm quartz sand
Intermediate Coat (optional)FOX EPOTHANE® BASECOAT
Top CoatFOX PURATHANE® TOPCOAT WB clear matt
Colour19 ready-made combinations (two Sole colours)
Adhesion Strength≥1.5 N/mm² with concrete failure (Sole TDS)
Shore A / Shore D (7 days)≥90 / ≥50 (Sole TDS)
Pot Life35-40 dakika
Application Temperature+10 °C / +30 °C
Substrate≥25 N/mm² compressive, ≥1.5 N/mm² tensile, moisture ≤4%

System Detail

StageProduct / Application TypeColour
PrimerFOX EPOTHANE® PRIMER HBClear
Primer0,1-0,3 mm Kuvars Kumu (60-70 AFS)
Intermediate Coat (Optional)0,1-0,3 mm Kuvars Kumu (60-70 AFS)
Intermediate Coat (Optional)FOX EPOTHANE® BASECOAT
CoatingFOX PURRAZZO SOLE COLORED 1Chart combination — 1st colour
CoatingFOX PURRAZZO SOLE COLORED 2Chart combination — 2nd colour
Top CoatFOX PURATHANE® TOPCOAT WBClear Matt

Areas of Use

  • Airports
  • Offices
  • Galleries
  • Shopping Centres
  • Supermarkets
  • Shops and Showrooms
  • Hotels
  • Hospitals
  • Large and Dynamic Spaces

Which floors can it be applied to?

Applied to concrete floors at least 3 weeks old with ≥25 N/mm² compressive and ≥1.5 N/mm² tensile strength; moisture must be ≤4%, the floor temperature at least +10 °C and 3 °C above the dew point. Cement laitance is removed by shot blasting, milling or diamond grinding; repairs are made with FOX EPOTHANE® PRIMER + quartz sand mortar.

Is the Intermediate Coat (FOX EPOTHANE® BASECOAT) mandatory?

No, it is optional; it is applied if there is undulation on the surface or if preferred. For conditions outside the standard, contact technical service for system details.

How is it maintained?

The seamless (jointless) surface does not hold dirt; it is easy to clean, requires minimum maintenance and is simple to repair. After application the coating must be protected from direct water contact for at least 24 hours.

What are the colour options?

Each Purrazzo system is offered with its own colour chart; the desired design can be achieved with different RAL colour options. The colours on the chart may differ from the original colours depending on the printing technique and the ambient light.

Is the pattern the same in every application?

No. Because the two colours are mixed in place, the transitions depend on hand workmanship; the 19 combinations on the chart are representative patterns and every floor is unique.

Can I choose my own colour pair?

Yes. The combinations are created from the colours in the Sole chart; for pairs outside the standard chart, consult our technical team.

Let's Work Together

Let us find the right solution for your space together

Fill in the form with your questions or project request; our team will contact you as soon as possible.

Purrazzo Dual application
Purrazzo Dual