The coating thickness is ~20 mm; the sub-base layer and its thickness are determined separately according to the drainage and load conditions of the project.
-
1
Fill
RequiredGranular fill is laid and compacted to level and strengthen the sub-base. The sub-base layer, its thickness and any geotextile requirement are determined according to the drainage and load conditions of the project.
Main Product 0-15 mm FILLER DOLGUGranular fill material used to level and strengthen the sub-base. Consumption is variable (depends on project conditions).
-
2
Reinforcement
RequiredThe geogrid mesh is laid on the prepared base without creases, folds or waves. Joints are overlapped as detailed in the project and the mesh is fixed; around trees and posts it is cut to fit the surface.
Main Product FOX PROMAT GG 80/80~1.05 m²/m²Biaxial 80/80 geogrid mesh. Consumption ~1.05 m²/m² including overlaps.
Packaging50 m² -
3
Aggregate and Binder
RequiredDry, clean aggregate and binder are mixed until the aggregate surfaces are evenly coated with binder. The mixture is poured onto the reinforced base and laid ~20 mm thick with a trowel and screed rail; over-compaction is avoided to preserve the open-pored structure.
Main Product FOX STONECARPET® AGREGA 4-7 mm~40 kg/m²Filler material obtained by crushing specially selected, naturally coloured aggregates. Consumption ~40.0 kg/m².
Main Product FOX STONECARPET® BINDER PU 1K~2 kg/m²Polyurethane-based, one-component, UV-resistant binder for natural aggregate. Consumption ~2.0 kg/m².
Packaging5 kg
About Ecodrain
Ecodrain is a water-permeable floor coating system made of special 4-7 mm natural stone aggregates and a one-component polyurethane binder. Its open-pored structure lets surface water pass into the layers below; it reduces standing water and the risk of icing. It is UV resistant, does not yellow and is designed for outdoor areas.
The soil surface is cleared of plant roots, organic matter and loose material; it is graded, compacted and levelled with 0-15 mm granular fill. FOX PROMAT GG 80/80 geogrid mesh is laid on the prepared base without creases (~1.05 m²/m² including overlaps). Dry, clean FOX STONECARPET® AGREGA 4-7 mm (~40 kg/m²) is mixed with FOX STONECARPET® BINDER PU 1K (~2.0 kg/m²) until the aggregate surfaces are evenly coated; the mixture is laid ~20 mm thick with a trowel and screed rail, preserving the open-pored structure.
Consumption figures are given for ideal weather, ambient and substrate conditions; changes in these conditions may alter the consumption and the system solution. We recommend having the application area inspected by our expert team before the system is specified.
Advantages
- Its open-pored structure reduces standing water and the risk of icing.
- UV resistant, does not yellow.
- Cures quickly.
- Its one-component formulation makes application easy.
- System structure reinforced with a geogrid.
Technical Specifications
System Detail
Areas of Use
- Footpaths in parks and gardens
- Outdoor areas of hotels, restaurants and cafés
- Garden and landscaped areas of homes
- Open areas exposed to pedestrian and light/medium vehicle traffic
- Garage entrances and car parks
How does Ecodrain let water through?
Which substrates is it applied to?
Is it suitable for vehicle traffic?
In which weather conditions can it be applied?
How is it cleaned and maintained?
When does the coating reach its final strength?
During application, ambient and surface temperature must be between +10 °C and +30 °C. Do not apply in rainy weather.
On impermeable surfaces such as concrete and asphalt, a suitable drainage system must be provided to prevent water from collecting under the coating.
The aggregates must be dry, clean and free of dust; damp or dirty aggregates can impair the adhesion of the binder.
Aggregate and binder must be used in the specified mixing ratio. Too much binder can close the open-pored structure and reduce water permeability.
To preserve the open-pored structure, over-compaction must be avoided during application.
The fresh coating must be protected from rain, direct contact with water and mechanical effects throughout the curing period.
The load-bearing capacity and drainage conditions of the sub-base must be checked before application.







