Xanthos • Bassın
FOX XANTHOS SYSTEM is a decorative floor coating system built from naturally coloured aggregates and a polyurethane-based binder, completed with a flexible filler and a protective top coat. Layer structure: FOX EPOTHANE® PRIMER with silica sand broadcast, FOX STONECARPET® BINDER PU 1K + FOX STONECARPET® AGREGA 2-3 mm coating, FOX XANTHOS FILLER filling, FOX DOMINO® PU SEALER FD793 top coat primer and FOX PURATHANE® TOPCOAT WB top coat.

The colour choice does not change the layer structure. Because of the nature of natural stone aggregates, variations in colour and texture may occur.

Application Surface
ColourBassın
FOX Xanthos Sistem Teknik Föyü
Floor
Primer
Broadcast
Binder and Aggregate
Filling
Top Coat Primer
Top Coat
Layers & Products6 layers
  1. 1

    Primer

    Required

    Component A is poured onto component B and mixed for about 2 minutes with a 300-400 rpm mixer. It is applied by roller, trowel or flat notched trowel so that the whole surface is covered without gaps.

    Main Product FOX EPOTHANE® PRIMER
    ~0.3 kg/m²

    Epoxy-based, two-component, solvent-free, clear primer. Consumption ~0.30 kg/m².

    Packaging
    24 kg
  2. 2

    Broadcast

    Required

    Silica sand is broadcast evenly onto the surface while the primer is still wet. After the primer has hardened, excess sand that has not bonded is removed with an industrial vacuum cleaner.

    Main Product FOX 15-25 AFS SİLİS KUM
    ~1 kg/m²

    0.7-1.2 mm silica sand. Consumption ~1.00 kg/m².

  3. 3

    Binder and Aggregate

    Required

    FOX STONECARPET® BINDER PU 1K and FOX STONECARPET® AGREGA 2-3 mm are mixed with a 300-400 rpm mixer for about 3-4 minutes until homogeneous. The mixture is poured onto the primed surface, spread to a uniform thickness with a steel trowel and compacted.

    ~0.75 kg/m²

    Polyurethane-based, one-component, UV-resistant binder for natural aggregate. Consumption ~0.75 kg/m².

    Packaging
    5 kg
    ~12 kg/m²

    Filler material obtained by crushing specially selected, naturally coloured aggregates. Consumption ~12.0 kg/m².

  4. 4

    Filling

    Required

    Once the aggregate coating has hardened sufficiently, loose particles and dust are removed. FOX XANTHOS FILLER is applied with a steel trowel so that it fills the voids between the aggregate grains; excess material is scraped off and the aggregate pattern is preserved.

    Main Product FOX XANTHOS FILLER
    ~1.7 kg/m²

    Ready-to-use, flexible filler material. Consumption ~1.7 kg/m².

    Packaging
    15 kg
  5. 5

    Top Coat Primer

    Required

    One-component and ready to use; applied undiluted with a short-pile white velour roller, evenly and without puddles.

    ~0.15 kg/m²

    Polyurethane-based, high-performance, dust-proofing, water-repellent, clear top coat protection material. Consumption ~0.150 kg/m².

    Packaging
    5 kg
  6. 6

    Top Coat

    Required

    Component A is stirred on its own, then component B is added and mixed for about 3-4 minutes. It is applied with a lint-free short-pile velour roller along the short side, each new pass joined to the previous wet area. After application the surface must be protected from direct contact with water for at least 24 hours.

    ~0.15 kg/m²

    Polyurethane-based, two-component, water-based top coat material. Consumption ~0.150 kg/m².

    Packaging
    5 kg
    1 kg

About Xanthos

Xanthos is a decorative and durable floor coating system built from naturally coloured aggregates and a polyurethane-based binder, completed with a flexible filler and a protective top coat. It gives an aesthetic, modern terrazzo look; it forms a seamless, joint-free surface, is UV resistant and is used indoors and outdoors.

The surface, prepared by shot blasting, milling or diamond grinding, is primed with FOX EPOTHANE® PRIMER (~0.30 kg/m²) and silica sand is broadcast while the primer is still wet (~1.00 kg/m²). FOX STONECARPET® BINDER PU 1K (~0.75 kg/m²) is mixed with FOX STONECARPET® AGREGA 2-3 mm (~12.0 kg/m²) and spread to a uniform thickness with a steel trowel. Once the aggregate coating has hardened sufficiently, FOX XANTHOS FILLER (~1.7 kg/m²) is applied so that it fills the voids between the grains. The surface is protected with FOX DOMINO® PU SEALER FD793 (~0.150 kg/m²) and FOX PURATHANE® TOPCOAT WB (~0.150 kg/m²). The system thickness is ~6.0-7.0 mm.

Consumption figures are given for ideal weather, ambient and substrate conditions; changes in these conditions may alter the consumption and the system solution. We recommend having the application area inspected by our expert team before the system is specified.

Advantages

  • Used indoors and outdoors.
  • Gives an aesthetic, modern terrazzo look.
  • Offers a range of colour and pattern options.
  • Forms a seamless, joint-free surface.
  • UV resistant.
  • Its filled structure gives a smooth, uniform surface.
  • Easy to clean.

Technical Specifications

System Thickness~6.0-7.0 mm
PrimerFOX EPOTHANE® PRIMER — ~0.30 kg/m²
BroadcastFOX 15-25 AFS SİLİS KUM silica sand (0.7-1.2 mm) — ~1.00 kg/m²
BinderFOX STONECARPET® BINDER PU 1K — ~0.75 kg/m²
AggregateFOX STONECARPET® AGREGA 2-3 mm — ~12.0 kg/m²
FillingFOX XANTHOS FILLER — ~1.7 kg/m²
Top Coat PrimerFOX DOMINO® PU SEALER FD793 — ~0.150 kg/m²
Top CoatFOX PURATHANE® TOPCOAT WB — ~0.150 kg/m²
Colour12 colours (Xanthos colour chart)
Surface TemperatureAt least 3 °C above the dew point
Open to Foot Traffic~24 hours (+23 °C)
Open to Light Traffic3 days (+23 °C)
Full Cure7 days (+23 °C)

System Detail

StageProduct / Application TypeConsumptionColourApplication ToolWaiting Time
PrimerFOX EPOTHANE® PRIMER0.3 kg/m²ClearRoller2-4 hours
BroadcastFOX 15-25 AFS SİLİS KUM1 kg/m²2-4 hours
Binder and AggregateFOX STONECARPET® BINDER PU 1K0.75 kg/m²ClearSteel Trowel6-24 hours
Binder and AggregateFOX STONECARPET® AGREGA 2-3 mm12 kg/m²
FillingFOX XANTHOS FILLER1.7 kg/m²Steel Trowel24 hours
Top Coat PrimerFOX DOMINO® PU SEALER FD7930.15 kg/m²ClearShort-Pile Velour Roller4-6 hours
Top CoatFOX PURATHANE® TOPCOAT WB0.15 kg/m²ClearShort-Pile Velour Roller2-4 hours

Areas of Use

  • Homes, hotels and residences
  • Stores, showrooms and shopping centres
  • Offices, restaurants and cafés
  • Areas where a decorative floor coating is required

Which surfaces is it applied to?

It is applied to sound, dry, clean and load-bearing surfaces. Oil, grease, dirt, dust and paint residues are removed; cement laitance and weak layers on concrete are removed by shot blasting, milling or diamond grinding to obtain an open-pored, rough surface. Cracks, voids and defects are repaired with suitable FOX repair products.

Can it be used indoors and outdoors?

Yes. The system is used indoors and outdoors and is UV resistant.

When can the coating be put into use?

At +23 °C the coating is expected to be open to foot traffic about 24 hours after the top coat is completed, to light traffic after 3 days, and to reach full cure after 7 days. These times may vary with ambient temperature and relative humidity.

How long is the waiting time between coats?

2-4 hours after the primer and broadcast, 6-24 hours after the binder and aggregate coating, 24 hours after FOX XANTHOS FILLER and 4-6 hours after the top coat primer. The times stated in the technical data sheets of the individual products must be observed.

How is it cleaned and maintained?

Dust, sand and dirt are removed with a soft brush or vacuum cleaning equipment. Water and pH-neutral cleaning agents are used for daily cleaning; abrasive chemicals, hard brushes and metal cleaning tools are to be avoided. Stains should be cleaned without delay, and the integrity of the protective top coat should be checked periodically.

Can colour and texture vary?

Because of the nature of natural stone aggregates, variations in colour and texture may occur. For a uniform appearance, the aggregate and binder mixture must be applied to the surface at an even thickness.
Critical

During application the surface temperature must be at least 3 °C above the dew point.

Critical

The surface must be sound, dry, clean and load-bearing; it must be free of oil, dirt, dust and loose particles that reduce adhesion.

Important

The aggregate coating must have cured sufficiently before FOX XANTHOS FILLER is applied.

Important

The waiting times between coats stated in the technical data sheets of the individual products must be observed.

Important

During application and until curing is complete, the surface must be protected from water, moisture, dust and mechanical effects.

Important

The aggregates used must be clean, dry and free of foreign matter.

Information

Surface moisture, ambient temperature and relative humidity must be checked before application.

Information

Because of the nature of natural stone aggregates, variations in colour and texture may occur.

System Products

Let's Work Together

Let us find the right solution for your space together

Fill in the form with your questions or project request; our team will contact you as soon as possible.

Xanthos application
Xanthos