Logo
EN

Betonage

Polymer-Based, Ready-to-Use Micro-Concrete Wall Coating System — Chipboard Substrates, BC+FC+FC finish, total approx. 2.15 mm

Smoky
Betonage • Smoky • BC+FC+FC
FOX BETONAGE® is a fine-textured, ready-to-use decorative micro-concrete coating system developed to create distinctive surfaces on floors and walls with its advanced polymer-based, multi-layer structure. Any surface — floor, wall, furniture or parquet — becomes your canvas.

Application with a BC+FC+FC finish on Chipboard Substrates; total system thickness approx. 2.15 mm (with proper surface preparation and correct application conditions).

Colour PaletteSmoky
Application Area
Substrate
Finish Options
Chipboard Surfaces
Waterproofing
Waterproofing
Waterproofing
Glass Textile Mesh
Waterproofing
Waterproofing
Coating
Coating
Coating
Top Coat
Layers & Products10 layers
  1. 1

    Waterproofing

    Required
    Main Product FOX UNIPRIMER FL555
    ~0.15 kg/m²

    A polymer-modified, resin-based, one-component, ready-to-use special primer in light blue, developed for absorbent and non-absorbent substrates.

    Packaging
    1 lt
    5 lt
    10 lt
    20 lt
  2. 2

    Waterproofing

    Required
    Main Product FOX WATERPROF® FS105
    ~0.6 kg/m²

    An elastomeric resin-based, one-component, ready-to-use elastic waterproofing material applied in wet areas under tiles.

    Packaging
    20 kg
    4 kg
  3. 3

    Waterproofing

    Required
    Main Product FOX TRIPLETAPE 90°

    Variable 3-Layer Alkali-Resistant Sealing Tape with Polypropylene Fleece on Both Sides

  4. 4

    Glass Textile Mesh

    Required
    Main Product FOX PROMAT 69
    ~1.05 kg/m²

    Glass Textile Mesh

  5. 5

    Waterproofing

    Required
    Main Product FOX WATERPROF® FS105
    ~0.5 kg/m²

    An elastomeric resin-based, one-component, ready-to-use elastic waterproofing material applied in wet areas under tiles.

    Packaging
    20 kg
    4 kg
  6. 6

    Waterproofing

    Required
    Main Product FOX UNIPRIMER FL555
    ~0.15 kg/m²

    Special Primer for Absorbent and Non-Absorbent Substrates

    Packaging
    1 lt
    20 lt
    10 lt
    5 lt
  7. 7

    Coating

    Required
    Main Product FOX BETONAGE BC
    ~1.5 kg/m²

    An acrylic, fine-textured, ready-to-use decorative microcement coating material suitable for distinctive surfaces, applicable on floors and walls in a multi-layer build-up

    Packaging
    15 kg
    Main Product FOX DOMINO COLOR WB AC
    ~0.015 kg/m²

    Water-based pigment paste

    Packaging
    0.15 kg
  8. 7A

    Sanding

    Interlayer Step
    40 Kum
  9. 8

    Coating

    Required
    Main Product FOX BETONAGE FC
    ~0.35 kg/m²

    An acrylic, fine-textured, ready-to-use decorative microcement coating material suitable for distinctive surfaces, applicable on floors and walls in a multi-layer build-up.

    Packaging
    15 kg
    3.5 kg
    Main Product FOX DOMINO COLOR WB AC
    ~0.0035 kg/m²

    Water-based pigment paste

    Packaging
    0.035 kg
  10. 9

    Coating

    Required
    Main Product FOX BETONAGE FC
    ~0.35 kg/m²

    An acrylic, fine-textured, ready-to-use decorative microcement coating material suitable for distinctive surfaces, applicable on floors and walls in a multi-layer build-up.

    Packaging
    15 kg
    3.5 kg
    Main Product FOX DOMINO COLOR WB AC
    ~0.0035 kg/m²

    Water-based pigment paste

    Packaging
    0.035 kg
  11. 9A

    Sanding

    Interlayer Step
    120 File
  12. 10

    Top Coat

    Required
    Main Product FOX PURATHANE® TOPCOAT WB LOW VISCOSITY
    ~0.1 kg/m²

    A modified polyurethane-based, two-component, water-based, UV-resistant, low-viscosity clear matt finish coat material with high abrasion resistance, containing aliphatic isocyanate.

    Packaging
    1 kg
    5 kg
    Alternative FOX PURATHANE TOPCOAT WB Matt B1 Base
    ~0.1 kg/m²

    Polyurethane-Based, Two-Component, Water-Based, Low-Viscosity Coloured Matt Finish Coat Material

    Packaging
    1 kg
    Alternative FOX DOMINO COLOR WB AC
    ~0.007 kg/m²

    Water-based pigment paste

    Packaging
    0.07 kg
  13. 10A

    Sanding

    Interlayer Step
    600-800 Sponge

About FOX BETONAGE® Wall — Chipboard Surfaces (BC+FC+FC)

FOX BETONAGE® is a fine-textured, ready-to-use decorative microconcrete coating material based on advanced polymer technology, developed to create distinctive surfaces on floors and walls with its multi-layer build-up. This system is defined for chipboard surfaces with a BC+FC+FC coating finish.

Layer sequence: Insulation, Glass Textile Mesh, Coating, Top Coat. Every Betonage coat is tinted with FOX DOMINO COLOR WB AC water-based pigment paste; sanding and dust removal between coats are part of the system. The coats that form the coating finish:
• FOX BETONAGE® BC — high strength, corrects surface defects, a sound and stable substrate
• FOX BETONAGE® FC — finer and more homogeneous texture, improves the decorative appearance

The surface can be walked on 24 hours after application is completed and reaches its final mechanical and chemical resistance in 7 days; it must be protected from direct water contact for the first 24 hours.

Consumption figures are given for ideal conditions at 23 °C; before specifying the system we recommend a site inspection with our expert team and agreeing the desired texture on a sample.

Advantages

  • It is used indoors and outdoors.
  • Gives the space a continuous, seamless appearance.
  • Can be applied to any surface and object.
  • Resistant to UV radiation.
  • Watertight.
  • Different colour options are available (39 colours).

Technical Specifications

Application AreaWall
SubstrateChipboard Substrates
Coating FinishBC+FC+FC — FOX BETONAGE® BC + FOX BETONAGE® FC + FOX BETONAGE® FC
Total System Thicknessapprox. 2.15 mm
Top CoatFOX PURATHANE® TOPCOAT WB-LV — water-based, clear matt polyurethane
ColouringFOX DOMINO COLOR WB AC pigment paste — 39 colours
Waiting Time Between CoatsBetonage coats 1-3 hours
Ready for UseFoot traffic 24 hours, final strength 7 days (23 °C)
CleaningFOX CLEANER FR340, neutral detergent or 5-10 % diluted alkali

System Detail

StageProduct / Application TypeConsumption
WaterproofingFOX UNIPRIMER FL5550.15 kg/m²
WaterproofingFOX WATERPROF® FS1050.6 kg/m²
WaterproofingFOX TRIPLETAPE 90°kg/m²
Glass Textile MeshFOX PROMAT 691.05 kg/m²
WaterproofingFOX WATERPROF® FS1050.5 kg/m²
WaterproofingFOX UNIPRIMER FL5550.15 kg/m²
CoatingFOX BETONAGE BC1.5 kg/m²
CoatingFOX DOMINO COLOR WB AC0.015 kg/m²
CoatingFOX BETONAGE FC0.35 kg/m²
CoatingFOX DOMINO COLOR WB AC0.0035 kg/m²
CoatingFOX BETONAGE FC0.35 kg/m²
CoatingFOX DOMINO COLOR WB AC0.0035 kg/m²
Top CoatFOX PURATHANE® TOPCOAT WB LOW VISCOSITY0.1 kg/m²

Areas of Use

  • Shops and Showrooms
  • Offices
  • Hotels, Restaurants and Cafés
  • Residences
  • Shopping Centres
  • Museums and Galleries

Which surfaces is this system applied to?

Applied to chipboard surfaces. The boards must be double-layered and the joints laminated with mesh; the system includes this step.

What is the difference between the HP, BC and FC coats?

BC provides high strength and corrects surface defects; HP produces a smoother, wear-resistant surface; FC gives the finest and most homogeneous texture. The desired texture is agreed on prepared samples; this system is the BC+FC+FC combination.

What is the total thickness?

With proper surface preparation and correct application conditions the total system thickness is approx. 2.15 mm. Values may vary depending on the condition of the surface and the application conditions.

Can it be used indoors and outdoors?

Yes. FOX BETONAGE® is used in interior and exterior spaces, is resistant to UV radiation and is waterproof. For wet area and exterior details, please consult our technical team.

When is the coating ready for use?

At 23 °C the surface can be walked on 24 hours after the application is completed; it reaches its final mechanical and chemical resistance at the end of 7 days. It must be protected from direct water contact for the first 24 hours; early water contact causes softening and blistering.

How is it cleaned and maintained?

It is cleaned with FOX CLEANER FR340, neutral detergents or alkalis diluted 5-10 % in water. Abrasive cleaners are not recommended.

System Products

FOX UNIPRIMER FL555

FOX UNIPRIMER FL555

FOX UNIPRIMER FL555 is a polymer-modified, solvent-free, ready-to-use special primer that provides excellent adhesion on concrete, screed, ceramic, and wooden surfaces.

  • Ready to use.
  • Easy to apply.
  • Thinned with water only.
FOX BETON RP25

FOX BETON RP25

FOX BETON RP25 is a factory-mixed, ready-to-use dry concrete/screed mortar with a cement base, polymer and fibre additives, and C25 concrete strength. Used for surface levelling, screed, and structural applications in interior and exterior environments.

  • Easy application.
  • Saves time and labour.
  • Prevents crack formation thanks to its additives.
FOX BETON RP25 RAPID

FOX BETON RP25 RAPID

FOX BETON RP25 RAPID is a cement-based, polymer and fibre-reinforced, fast-setting ready-mix dry concrete/screed mortar. Walkable 3 hours after application, with C25 concrete strength.

  • Easy application
  • Walkable after 3 hours
  • Can be tiled with ceramic and similar stone materials after 4 hours
FOX BETON RP30

FOX BETON RP30

FOX BETON RP30 is a cement-based, polymer-modified and fibre-reinforced C30 strength ready dry concrete/screed mortar. Used for floor levelling, screed and structural fill applications indoors and outdoors.

  • Easy application.
  • Saves time and labour.
  • Prevents crack formation thanks to its additives.
FOX EPOTHANE® PRIMER HBF

FOX EPOTHANE® PRIMER HBF

FOX EPOTHANE® PRIMER HB is a two-component, solvent-free, low-viscosity transparent epoxy primer set developed for dry and damp concrete and steel surfaces. It is used as a primer under epoxy and polyurethane floor coatings.

  • Suitable for interior and exterior use.
  • Can be applied and fully cures below +10°C and up to 100% relative humidity.
  • Provides good corrosion protection on steel.
FOX EPOTHANE® PRIMER SL

FOX EPOTHANE® PRIMER SL

FOX EPOTHANE® PRIMER SL is a two-component, low-viscosity, solvent-based, transparent epoxy primer used prior to epoxy/polyurethane coating systems on concrete, asphalt and bitumen surfaces.

  • Suitable for interior and exterior use.
  • Can accept a high proportion of fillers.
  • Offers high chemical and mechanical resistance.
FOX PURATHANE® PRIMER 1K

FOX PURATHANE® PRIMER 1K

FOX PURATHANE® PRIMER 1K is a polyurethane-based, single-component, solvent-borne, flexible and fast-curing low-viscosity primer. Used as a primer beneath polyurethane waterproofing coatings.

  • Suitable for interior and exterior applications.
  • Provides excellent adhesion.
  • Offers excellent chemical resistance.

FOX DOMINO® MULTI FD746

FOX DOMINO® MULTI FD746 is a cement-based, fast-setting, high-strength surface levelling and decorative coating mortar applicable at 2–30 mm thickness. It is used for filling cracks and fractures on wall, floor and ceiling surfaces and for coating preparation work.

  • Gains strength rapidly; can be opened to traffic 2–3 hours after application.
  • Provides a decorative finish.
  • Mixed with water only.
FOX WATERPROF® FS105

FOX WATERPROF® FS105

FOX WATERPROF® FS105 is a single-component, ready-to-use elastic waterproofing material based on elastomeric resin. Suitable for under-tile, bathroom and shower applications in both interior and exterior settings.

  • Single-component, ready to use.
  • Easily applied by brush.
  • Forms no joints.
FOX TRIPLETAPE 90°

FOX TRIPLETAPE 90°

FOX TRIPLETAPE 90° is a 3-layer thermoplastic elastomer internal corner waterproofing tape with PP fleece coating on both sides, designed for internal corner joints in wet area and waterproofing applications.

  • Easy and fast to apply.
  • Highly resistant to alkali due to fleece coating on both sides.
  • Resistant to freeze-thaw cycles.

FOX PROMAT 69

FOX PROMAT 69 is a reinforcement mesh with an alkali-resistant glass fibre structure. It is used to prevent crack formation in render, waterproofing, and floor covering applications.

  • Long service life thanks to high alkali resistance.
  • High tensile strength due to its glass fibre structure.
  • Prevents crack formation.
FOX EPOTHANE® ISO-CRACK EP-2K

FOX EPOTHANE® ISO-CRACK EP-2K

FOX EPOTHANE® ISO-CRACK EP-2K is a 100% solids, two-component, flexible epoxy-polyurethane membrane designed to prevent reflective cracking in FOX BAU TERRAZZO coating systems. With 140–160% elongation at break, it provides superior crack bridging against horizontal surface movement.

  • 100% solids for low odour and workplace safety during installation.
  • Provides excellent adhesion.
  • Has excellent chemical resistance.
FOX SSL® 80

FOX SSL® 80

FOX SSL® 80 is a cement-based, high-strength self-levelling screed applicable in a thickness range of 3–50 mm. It is suitable for a wide range of interior applications, including underfloor heating systems.

  • For use in interior spaces.
  • High strength.
  • Walkable after 3 hours.
FOX SSL® 75 GYP

FOX SSL® 75 GYP

FOX SSL® 75 GYP is a calcium sulphate-based, fibre-reinforced, self-levelling floor screed. It can be applied in a thickness range of 1.5–50 mm and is walkable after 2–3 hours.

  • Walkable after 2–3 hours.
  • Very low internal stress.
  • Achieves high strength rapidly.
FOX PRIMERA® FL220

FOX PRIMERA® FL220

FOX PRIMERA® FL220 is a polymer dispersion-based, single-component, water-based universal primer. It is used to increase adhesion and provide moisture protection on absorbent and weak surfaces in interior and exterior applications.

  • Extremely easy to apply.
  • Increases adhesion.
  • Prevents the substrate from rapidly absorbing the water from the plaster to be applied, thereby preventing sudden drying cracks.
FOX DECOPRIMER FL204

FOX DECOPRIMER FL204

FOX DECOPRIMER FL204 is a fast-drying, multi-purpose primer based on acrylic dispersion. It is used in interior and exterior applications on concrete, wood and composite surfaces to increase adhesion strength prior to decorative coatings.

  • Penetrates deeply.
  • Increases surface adhesion.
  • High performance.
FOX BETONAGE® BC

FOX BETONAGE® BC

FOX BETONAGE® BC is an acrylic-based, fine-textured, ready-to-use micro-concrete coating material. It is designed for multi-layer decorative applications on floors and walls in both interior and exterior environments.

  • Suitable for interior and exterior use.
  • Gives the space a continuous, seamless appearance.
  • Can be applied to any surface and object.
FOX BETONAGE® HP

FOX BETONAGE® HP

FOX BETONAGE® HP is a ready-to-use, fine-textured, acrylic-based decorative micro-concrete coating material applicable to wall and floor surfaces in interior and exterior environments.

  • Gives the space a continuous, seamless appearance.
  • Can be applied to any surface and object.
  • Resistant to UV radiation.
FOX BETONAGE® FC

FOX BETONAGE® FC

FOX BETONAGE® FC is a ready-to-use, acrylic-based finish coat coating material that provides a multi-layer decorative microcement appearance on floors and walls.

  • Suitable for interior and exterior use.
  • Gives the space a continuous, seamless appearance.
  • Can be applied to any surface and object.
FOX PURATHANE® TOPCOAT WB LOW VISCOSITY

FOX PURATHANE® TOPCOAT WB LOW VISCOSITY

FOX PURATHANE® TOPCOAT WB LOW VISCOSITY is a modified polyurethane-based, two-component, water-based, UV-resistant, low-viscosity transparent matt topcoat material. It is ideal for flooring systems, walls, garages and industrial areas requiring high abrasion resistance and hygiene.

  • UV resistant.
  • Low viscosity.
  • High surface wetting power.
FOX PURATHANE® TOPCOAT WB

FOX PURATHANE® TOPCOAT WB

FOX PURATHANE® TOPCOAT WB is a modified polyurethane-based, two-component, water-based, UV-resistant topcoat with high abrasion resistance, containing aliphatic isocyanate. It is used in epoxy and polyurethane floor systems, on walls and in various industrial areas.

  • UV resistant.
  • Provides excellent adhesion.
  • Has excellent abrasion resistance.

Similar Systems

Other Systems

Lavanda

Creative Series Decorative

Olympos Stucco

Cement based, trowel-polishable decorative render: distinctive surfaces on interior and exterior walls with 17 texturing techniques and a rich colour palette.

Wall
Cobalt

Creative Series Decorative

Dekoflake

Decorative floor coating systems textured with broadcast coloured flakes.

Floor
Metalage Copper

Creative Series Decorative

Metalage

Metalage; a decorative coating system that gives walls and floors the look of solid metal with real metal pigments. From FOX BAU, with Copper, Bronze, Gold, Iron, Stannic and Rusty options.

Wall and Floor
Cream

Creative Series Decorative

Sagalassos

Cement and polymer dispersion based, UV resistant, non-slip decorative coating system; two textures via trowel or textured basecoat, 10 colours.
Bazalt Siyah

Creative Series Decorative

Stonecarpet

Water-permeable decorative stone carpet systems made of natural aggregate bound with a clear resin.

Floor
EP 1013 · RAL 9003

Creative Series Decorative

Epoxy Terrazzo

Zeugma epoxy terrazzo: 9-11 mm, all RAL colours, Micro/Medium/Large aggregate, matt, semi-matt or gloss top coat.

Floor
Black Pearl

Creative Series Decorative

PebbleDeck

A non-slip, seamless pool coating system of natural pebbles and polyurethane binder, resistant to pool chemicals and UV. 20 colour options.

Pool
DP 1028

Creative Series Decorative

Cement Terrazzo

Lycia cement terrazzo: 18-20 mm, all RAL colours, Micro/Medium/Large aggregate, matt or lithium silicate gloss top coat.

Floor
Beige

Creative Series Decorative

Purrazzo Sole

Polyurethane based, self-levelling decorative floor: UV resistant, durable, easy to clean, seamless coating. Indoors and outdoors, with 30 colour options.

Floor
Quartz Feather

Creative Series Decorative

Purrazzo Dual

A polyurethane based decorative floor with rich colour transitions created by blending two Purrazzo Sole colours. 18 combinations for galleries, shopping centres and large spaces.

Floor
Oyster White

Creative Series Decorative

Purrazzo Point

Polyurethane based, self-levelling, sound-insulating decorative floor coating. 18 colour options for comfort-led spaces.

Floor
Signal White

Creative Series Decorative

Purrazzo Contact

Natural stone textured, polyurethane based broadcast decorative floor coating. UV resistant and water-repellent; warm, natural interiors in 18 stone colours.

Floor
PU2019 RAL3015

Creative Series Decorative

Purrazzo Mix

Polyurethane based, antibacterial, steam-cleanable decorative terrazzo floor. 18 sample patterns combining PU binder × RAL colour.

Floor
White

Creative Series Decorative

Betonage Pool

Cement and polymer dispersion based, UV resistant, non-slip, seamless pool coating system with a natural concrete look; 7 colours.

Pool
Diamante Nero

Creative Series Decorative

Precasto

Fox Bau Creative's precast terrazzo series: 2 cm thick slabs, tiles, wall tiles, skirtings and steps; 13 colours, gloss or matt top coat.

FloorWall

Let's Work Together

Let us find the right solution for your space together

Fill in the form with your questions or project request; our team will contact you as soon as possible.